Reviews
Used for Torque management of brake hose banjo adapter tightening
Aluminum banjo to avoid cracking and splitting due to over-tightening.
Wobble is minimal and the feel is good.
There are not that many scenes used, but since the price is Reasonable, I don't think it's a problem.
Note that the mounting orientation on the Torque wrench needs to be corrected, so we recommend referring to the WrenchManufacturer's usage instructions.
View detail
Great tool set makes working on my bikes easy.
I like these wrenches.high quality, japaned made,feeling hand perfect.the cost is right and works fine They are quick and easy to use and I keep them with my tool box.The length is sufficient. It is not too long. It fits in the tool box. It is quick and easy to check tightness of almost every bolt on my bike with these while riding or servicing my bike.Wish they offered a set with 7mm and 13mm.Highly recommened. View detail
A gem and a masterpiece
Replaced a set of 4 KOWA T-Type Wrench up to 8,10,12,14 after several years.
Although I have been working with KTC and Kohken, I can say again that KOWA is the best fit for TWrench.
According to Large's senior maintenance staff, in the past, whenever the Japan GP was held at Suzuka, overseas mechanics used to come to Large's tool shop to buy only KOWA's TWrench, which makes sense.
There are a few important areas in TWrench, but the welds are weld treated or there is no spatter on the weld bead at all as shown in the photo.
This smoothness leads to a sense of security while working, because it is the soft area between fingers that touches here.
The surface treatment is pear-shaped, and when wiped with wet tissue, the finish is such that the fibers are uprooted.
Everyone may have their own preference for the center of gravity balance, but in my opinion, this position is one answer to the question.
Although there are now products that exceed the thinness of the Socket, they seem to have settled on a balance of sufficient strength and thinness without pursuing excessive thinness that is not necessary.
In fact, I have never encountered a situation where I would want to use TWrench that would not be Accessible with this thinness.
The slimness that fits comfortably in your hand, the length of the handle, the length of the arm, the thinness of the Socket, and the center of gravity are all excellent, and I will probably keep buying the same one even if this one breaks in the future.
View detail
Made by DAYTONA because there was no Size for KTC's one.
Until now, KTC's L-Type Quantity:It was opened and closed by twisting and turning it with Set's.
I had been thinking of getting a Type T for some time, but had held off because I thought the work time would be much the same.
However, as I got older, I changed my mind and decided that I wanted to have as much fun as possible, so I took the plunge and bought a frequently-used Size one.
We mainly use KTC tools and wanted to get the same Manufacturer, but there were no sizes available, so we bought DAYTONA tools.
It is as easy to use as KTC, if not easier, and the T-type could have been made by DAYTONA.
View detail
Fits: HONDA CB50, HONDA MONKEY, HONDA DREAM50, HONDA DREAM50, HONDA DREAM50, HONDA SUPER CUB 50, HONDA GORILLA, HONDA APE 50, HONDA APE 100
It is used infrequently.
It is still easier to use dedicated tools. View detail
Valve clearance adjustment
Used for JA55 Valve clearance adjustment.
I have not used other products so I can't compare, but the EX and IN sides were easy to work with.
View detail
Fits: HONDA glom, HONDA MONKEY125, HONDA SUPER CUBC125, HONDA CT125CT110 HUNTER CUB
First time I've used it.
I have been adjusting the Tappet on this type of Honda quite often, but I have never used this type of tool before, so I bought it to try it out.
I use it on my race car and it helps me cool down the Engine between practices and make quick adjustments.
I regret not having used it before! I didn't think so, but it is so useful that it has become a regular in my tool box.
View detail
It's okay if you don't have it, but if you do, it might be useful for something.
I'm a Cross wrench for Automotive for Tire.
There will come a time when it will be of some use. (Lol)
In the meantime, it is more convenient to use a cross wrench for stubbornly hard nuts, etc., because it is easier to apply force to them.
View detail
Well than what you see in the picture.
To adjust the FrontPre-road,
I bought it because I didn't want to put Anodized on Wound.
Much more rugged than it looks in the picture,
It's a bit … to carry.
View detail
Convenient
We mainly use Hexa for quick turnaround.
Personally, I am still learning about fast turnaround, but once I get used to it, it will save me a lot of maintenance time.
View detail
PRO Tool.
This is a nifty tool from Pro shop Technics in Suspension, if you don't want to put a Wound on the Top cap. View detail
Not necessary unless you really need Torque
This is good for those who have room in their toolbox.
I bought it to remove the bolt from the undercarriage, but I had to use a torque wrench to tighten the bolt in the end, so this may not have been necessary if I had a Universal.
View detail
Used for Overhaul of Front fork.
There is just a little bit of BALI on it, so it might be better to finish it with a light file before use. 。 It is made of Engineer plastic-like hard material, so it won't nudge Cap's head unless it is very hard to do so. View detail
Longed-for Kowa T-Type Wrench
Cheap and easy to use, Commendation but not easily distributed. View detail
Fits: Others CUB ,CB50,MONKEY,GORILLA,APE50,APE100,DREAM50 (AC16/15,AC07),KITACO Ultra head,KITACOAPE series SPLHead
To use
I was worried about the poor rating, but it works just fine. (I'm a mechanic.)
You can adjust Tappet without it, but it is useful to have it.
View detail
I can use it
I recommend it because it is easy to use. View detail
Fixed Type is good.
It looks a little cheap, but the Fixed Type is easy to use.
I have a Free one, but it comes off during use, so I will use this one.
View detail
Fits: HONDA , KAWASAKI KSR110, KAWASAKI KLX110, HONDA MONKEY, HONDA APE50
MINIMOTO key set
The tool is solid, the design is excellent. I took to adjust the gaps on my mopeds.
I liked everything, nothing to complain about. -------------------------------------------------- -------- The tool is solid, everything is fine in constructive. I took it to adjust the gaps on my mopes. I liked everything, there is nothing to complain about. Powered by Google Translator
View detail
Great
Great exactly what I need for fjr. It smells like an old item but its well oiled & kept. Parcel came in very well packed too though delivery took some time. View detail
StemMaintenance
I purchased a nut removal tool for bearing maintenance of Stem, OEM product is expensive and not used often.
The Torque wrench can be attached to the end of the Torque wrench, so the Torque is large and sturdy.
View detail