Reviews
I think it is very cosy. It is carefully made.
I have been using Quantity for many years now.:The socket adapter of the set finally broke. I was looking for a replacement, and this product seemed to be the cheapest and the most well-made, so I bought it. I bought it because it seemed to be the cheapest and well-made product I could find. It fits very snugly and is easy to remove, and I think it is very cost effective.
I don't know about durability, but it looks good, so I gave it 5 stars.
View detail
Used with Axle Nut
No problems with this product. I use it with Axle Nut on my off-road motorcycle.
For a moment I thought about substituting Pliers, etc., but then I thought, well, I'll just buy it and add another Socket! (Lol)
SIGNET is a Brand that I trust, so I chose them first based on cosmetics. The performance is also fine.
View detail
Size that fits in your hand
When held in the hand, the thumb and index finger naturally clasp the head of the Ratchet, and the thickness of the handle is just right, making it very easy to use. I am impressed by the structure of the switch lever, which moves smoothly and does not stop in the middle of the handle. View detail
Used for gsx-r1000
Purchased this product because OEM dedicated tools are expensive. The hex angles are highly accurate and do not rattle. View detail
For removal of Stem Nut
I bought this for removing the Stem Nut when replacing the Top Bridge on my GSX1300R HAYABUSA.
It works fine, and it costs about 2000 yen if you buy it at Home center, so this one is cheaper.
Info:(Japanese only)
GSX1300R HAYABUSAStem Nut tightening Torque:90N
View detail
Tool Manufacturer in Japan
The socket set was purchased 40 years ago from an unknown manufacturer. 14mm is the last one. I am not so particular about it, but I bought it this time because TONE is JapanBrand.
I don't know how to compare it to a no-name brand with a different price tag, but it is well made and has no wobble. The half pear shape also helps to reduce oil slippage, and I felt that the handlebar socket really shows off the performance of the handlebar. I am glad that I purchased a solid one because I will be using it a lot.
View detail
Very convenient... ♪
Good cosmetic.
If you have all of these, you will not have any problems with Large bodies.
View detail
This is enough for the Torx bit socket of T30
[How is it used?
Used to remove the key cylinder from the Top Bridge of a YAMAHA TZr50R.
I had TorqueT40 for XJR400R Rear suspension, but the size was different, so I had to purchase additional TorqueT40 as Single Item.
Was the one you received as per Image?
It was just as Image.
I checked the size in Home center before purchasing.
How was your experience with it?
It works fine. SK11 is very good for DIY riders because of its cost performance.
[Points to note]
Not particularly
How did it compare to other products?
Torque is rarely used on domestic cars, so I think that SK11's most cost-effective tools will be enough without buying expensive ones.
View detail
Case may not be necessary.
This is a product of Z-EAL, a brand of ko-ken that is trying to develop a small type that is not limited to the general industrial standard, so it is the best choice for users who prefer 1/4 size. Is it the best choice for users who prefer 1/4 size? It is so small that you may laugh a little.
The Ratchet, which is slender but has a click feeling unique to ko-ken, has been spec. changed to 72 GEAR in the 2023 Spec. change. Quantity:The Ratchet included in the Set does not have a push release, which is fine with me since I am not too concerned about it, but it seems to naturally lead to the suppression of overtorque, partly because the Ratchet is a Small Type, which also makes me aware that it is a high-end product.
This Quantity:The set includes a 4.5mm hex socket and Plus minus bits, which are not used as often as you might think, so if you prefer to be a little more selective about what you put in and want to pay less, you can order a special quantity from FACTORYGEAR.:There is a little more content vetted at Set, so that might be a good choice.
Material:It comes in a plastic case with a luxurious feel, but the Socket does not sit well against the Sponge, which serves as a Holder, so it becomes RoseRose inside when carried around in the case, which is very annoying.
In my case, I bought individual TONE Aluminum socket rails and put them in my tool box.
Originally, I purchased this product because I wanted to make a high-precision socket to be used with the 1/4 size Torque wrench for low Torque of Tonichi, but if I want to do maintenance such as removing and installing the exterior and around the carburetor, this quantity is perfect.:Set alone seems to provide almost everything. You may not need to use 3/8Size except for the undercarriage.
View detail
Exhaust flange, etc.
It is used to remove the exhaust pipe or when the bolt nut is difficult to access due to obstructions, etc.
This is a useful item because there are times when it is not necessary to remove obstacles.
The texture is like KTC!
View detail
I have one.
For some reason, I have one in Torque.
Torque is often used in Harley, so it is useful to have.
View detail
Not for everyone.
It is a hexagonal, low-head Profile Socket.
It is sold without any warning, but as a result of prioritizing handling, it is short and easy to use in some situations, but on the other hand, it cannot be used in places where Bolt needs a little length on the Socket side, such as a longer Penetrating Nut or Cap Nut. (Standard length sockets from other manufacturers or semi-deep sockets from ZEALBrand are required.)
Therefore, if you want to use one type of Socket for all parts of the system, it is not recommended at all.
For those who are willing to use low head whenever possible where sockets are used, and only replace them with semiDeep or other companies' products for exceptions after a bit. Beginners and Light users should buy something else. It is also not suitable for circuit use where you want to limit the number of tools you bring with you.
However, the rattling and bending when using Socket is close to Zero, so it is definitely reliable in usable areas.
View detail
under compulsion
I lost my 24mm Socket for Elumi's Castle Nut, and although I rarely use 24mm, I needed it, so I purchased the SK11 SK11 Socket 24mm this time, considering the cost performance.
9.I was torn between 5mm and 12.7mm, but decided to go with 9.5mm since Motorcycle uses 9.5mm as a base.
The quality is good and they are a reliable Manufacturer that I have purchased many other things from.
View detail
3/8 might be better for the final tightening.
I would like to add that the product description was missing.
This is a Hexagon socket with a 6.35mm (1/4Inch) insertion angle. This size is 4mm.
2.I bought everything from 5 to 8mm at once.
Compact tools are easier to use for attaching/removing exterior and small objects, so they are used separately from 9.5mm (3/8) tools.
It is useful to use this Socket together with a 1/4Inch THandlebar or a 1/4 Driver-like Handlebar.
For 8mm hexes, the Torque is so large that it is safer to use a 3/8 insert depending on the location, but for hexes located in tight spaces or at the back of the room, a slim 1/4 is not acceptable.
I am using a 3/8 hex socket made by KTC, but the hex shaft (tip bit) is screw-fixed and can easily come off.
So I bought more 1/4s and made them TONE. This is good because the tip Bit is press-fitted so it won't fall out.
Can I recommend this product to my friends and acquaintances? ⇒ YES... You can RECOMMENDATION.
View detail
Compact 1/4 Inch Socket is convenient!
This is a Hexagon socket with a 6.35mm (1/4Inch) insertion angle. This size is 6mm.
2.I bought everything from 5 to 8mm at once.
Compact tools are easier to use for attaching/removing exterior and small objects, so they are used separately from 9.5mm (3/8) tools.
It is useful to use this Socket together with a 1/4Inch THandlebar or a 1/4 Driver-like Handlebar.
I am using KTC made as 3/8 Hex socket, but the Hex axis (tip Bit) is Screw fixed and can easily come off.
So I bought more 1/4s and made them TONE. This is good because the tip Bit is press-fitted so it won't fall out.
Can I recommend this product to my friends and acquaintances? ⇒ YES... You can RECOMMENDATION.
View detail
I like the way it's built with no Bit missing.
I would like to add that the product description was missing.
This is a Hexagon socket with a 6.35mm (1/4Inch) insertion angle. This size is 4mm.
2.I bought everything from 5 to 8mm at once.
Compact tools are easier to use for attaching/removing exterior and small objects, so they are used separately from 9.5mm (3/8) tools.
It is useful to use this Socket together with a 1/4Inch THandlebar or a 1/4 Driver-like Handlebar.
I am using KTC made as 3/8 Hex socket, but the Hex axis (tip Bit) is Screw fixed and can easily come off.
So I bought more 1/4s and made them TONE. This is good because the tip Bit is press-fitted so it won't fall out.
View detail
Recommended by KTC
I would like to add that the product description was missing.
Hexagon socket with a 6.35mm (1/4inch) insertion angle. 3mm in size.
This time, I bought everything from 2.5mm to 8mm.
Compact tools are easier to use for attaching/removing exterior and small objects, so they are used separately from 9.5mm (3/8) tools.
It is useful to use this Socket together with a 1/4Inch THandlebar or a 1/4 Driver-like Handlebar.
I am using KTC made as 3/8 Hex socket, but the Hex axis (tip Bit) is Screw fixed and can easily come off.
So I bought more 1/4s and made them TONE. This is good because the tip Bit is press-fitted so it won't fall out.
View detail
Recommended by KTC
I would like to add that the product description was missing.
Hexagon socket with 6.35mm (1/4inch) insertion angle and 2.5mm size.
Compact tools are easier to use for attaching/removing exterior and small objects, so they are used separately from 9.5mm (3/8) tools.
It is useful to use this Socket together with a 1/4Inch THandlebar or a 1/4 Driver-like Handlebar.
I am using KTC made as 3/8 Hex socket, but the Hex axis (tip Bit) is Screw fixed and can easily come off.
So I bought more 1/4s and made them TONE. This is good because the tip Bit is press-fitted so it won't fall out.
View detail
I just bought #6 for now.
Basically, Hexagon Bit Socket is not for regular use with long length, and I prefer to use the shortest possible Hex, but I buy Single Item at Koken only for those parts where I have no choice.
This #6 was purchased for use on the bottom portion of the Upright Front Fork, against the bolt that is located at the back of the fork.
Since it is not a place that is used that often (since it is only touched during O/H of Fork), I had been using a cheap Brand's one, but when I used it on a tightly stuck partner, I could see the twisting with my eyes, and I realized again that cheap is cheap after all.
This is especially true for the long length of 75mm, but if you are a few hundred yen stingy and try to screw up the bottom bolt, you will be in for a world of trouble.
If it's Bit or something like that, I'm sure that Kohken is reliable, but I wonder how far they can go when dealing with Bolt, which is of low quality to begin with.
View detail
Made by TONE for peace of mind. Personally recommended over KTC.
I would like to add that the product description was missing.
This is a Hexagon socket with a 6.35mm (1/4Inch) insertion angle. This size is 5mm.
2.I bought everything from 5 to 8mm at once.
Compact tools are easier to use for attaching/removing exterior and small objects, so they are used separately from 9.5mm (3/8) tools.
It is useful to use this Socket together with a 1/4Inch THandlebar or a 1/4 Driver-like Handlebar.
I am using KTC made as 3/8 Hex socket, but the Hex axis (tip Bit) is Screw fixed and can easily come off.
So I bought more 1/4s and made them TONE. This is good because the tip Bit is press-fitted so it won't fall out.
Can I recommend this product to my friends and acquaintances? ⇒ YES... You can RECOMMENDATION.
View detail