Motorcycle Tools Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

HP2 SPORT Tools Clear all

DAYTONA

17 Aug 2022

Plug Wrench Socket 14mm

Fits: HONDA CB1100, HONDA FORZA Si, HONDA FORZA Z, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MT-07, YAMAHA XVS1300A, YAMAHA YZF-R1, SUZUKI DL1000 V-STROM1000, DUCATI 1098, DUCATI 1098S, DUCATI 1198, DUCATI 1198R, DUCATI 1198S, DUCATI 1199Panigale, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1981 1098R, DUCATI 669 MONSTER S2 S4R, DUCATI 669 MONSTER S2 S4RS

Japanese Webike user

installed on

4/5

Used in Z400 Plug replacement

[How is it used?
As the Title says, Z400 (22 years old) Used in plug replacement of
This is the first time that a Rubber type with dropout protection has been used.

Was the one you received as per Image?
As per Image.
The solid construction of the product does not break easily, and I felt that it has the robustness to be used many times.
The plating is well finished and is not likely to rust.

How was your experience with it?
The Z400 plug was reached without any problem, and the bolt head of the screw could be loosened and tightened without licking.
However, as for the function to prevent the Plug from falling out, it may be a problem with the shape of the Plug, but it keeps falling out no matter how many times I try, so I am a little disappointed in this respect.
Radio pliers can be used to remove and install the plug from the plug hole, which increases man-hours slightly, but the work itself is possible.

[Points to note]
None in particular

How did it compare to other products?
I think the Magnet type of dropout protection is definitely the way to go.
All of the other Size plug wrench sockets that I own are Magnet-type, but they have never fallen out.

[ITEMS TO BUY TOGETHER
Trak Wrench
When tightening a long reach plug, it is not certain that it can be done well if it is tightened at an angle, so it is better to use Torque to control the tightening.

Socket Extension Adapter
Plug is unreachable by Socket alone without an extension Adapter.

Pivoting ExtensionAdapter
It would be easier to work with if there were

Breaker bar
Ratchet View detail

DAYTONA

19 Apr 2022

Plug Wrench Socket 14mm

Japanese Webike user

installed on

5/5

I can use it to maintain the Plug in the back!

I use this product for plug maintenance in the back of the house because it is a long and narrow plug wrench socket. View detail

DAYTONA

18 Feb 2022

Plug Wrench Socket 14mm

Japanese Webike user

installed on

4/5

Easy-to-use Plug wrench

The rubber grip prevents the plug from falling out, making it safe and convenient to replace the Spark plug. View detail

DAYTONA

06 Sep 2020

Plug Cap Drive Tool For BMW

Fits: BMW R850RT, BMW R850R, BMW R850R, BMW R1200ST, BMW R1200S, BMW R1150RS, BMW R1150RT, BMW R1150R, BMW R1150GS, BMW R1150GS, BMW R1100S, BMW R1100RS, BMW HP2 SPORT, BMW R1200RT, BMW R1200RS, BMW R1200R, BMW R1200GS, BMW R1200GS Adventure, BMW R900 RT 03-13, BMW HP 04-08

Japanese Webike user

installed on

1/5

The build is fine.

I bought it because it's a pain in the ass to get the in-vehicle tools out.
It didn't work on the R1100RS.
It's a shame that the R1100RS was included in the fitment. View detail

DAYTONA

23 Jun 2020

Plug Wrench Socket 14mm

Japanese Webike user

installed on

3/5

Essential Items for Plug Exchange

I bought it with the Plug during the Plug replacement period
It looks like just a docket, but there is a Material:It has a Rubber ring to help prevent the plug from falling out But sometimes Material:Since the rubber ring part may fall out, you might want to check it every time Not As a result, I am satisfied with the improvement in maintenance efficiency View detail

DAYTONA

24 Mar 2020

Plug Cap Drive Tool For BMW

Japan User(translated)

installed on

4/5

BMW only "If you're gonna trade a plug, you might as well have one

I don't have an S1000RR to fit the car, but I was able to use it with no problems
I think any BMW car would work fine for any model of car

What did I think of this product?
If you're replacing a plug in a BMW car, it's a must-have product It is
The reason is that BMW's Direct Ignition fixation on Pretty solid From

The first time I did a Plug replacement, I didn't know this tool existed
It doesn't feel at all like I can pick it up with my fingers and shake it a few times to get it off
Rather, it's so hard that I think it's baked in, and I can't get it off

And because of Direct Ignition's small space, it's going to pull out 100% of the power Nor can it be
After all, you can use a slotted screwdriver to pull it out by the principle of leverage so that you don't hit it too hard I went
I was able to pull it out as a result, but
"Just pull out all the Direct Ignition It's been an hour before I realized it... My back and hands are aching, and Direct Ignition is Wound It's just that I'm all alone now
I felt very deflated

I have such bitter memories, and this is the second time to replace the plug I found out about this tool and used it
It was easy to remove Where the last time it took an hour, this time it took less than 15 minutes to pull it out

I should have known this a long time ago I thought
The claw part is firmly in place and secured to the head of the Direct Ignition and pulled out as is just because
It is easy to pull out However, since the space is narrow in the first and fourth, it seems to need a hang to pull it out, fixing it well

Overall, it's a good product that will save you time, and you should have it because you're a BMUser It's a thing
View detail

DAYTONA

23 Apr 2018

Plug Wrench Socket 14mm

Japan User(translated)

installed on

5/5

Be firm

Purchased to Plugfor Replacement of BMW R1200GS. As I checked the plug hole in advance, it was quite deep, and it was previously Socket for 16 mm (To KLX 250) I was satisfied with the texture when I bought it, so I bought it this time. I have not exchanged the Plug yet, but I think that it is slim so that it can be used enough for use. View detail

DAYTONA

23 Apr 2018

Plug Cap Drive Tool For BMW

Japan User(translated)

installed on

5/5

To BMW R1200 GSP plug for Replacement

Since I have an Engine Guard on my GS, I can not install it firmly unless I remove it, so I do not know the real feeling of use until actual plug replacement, but if you insert a handheld Driver etc, I think it's good. Considering the price of OEM's special tools, making is not bad, and COSPA is okay, I feel good. View detail

DAYTONA

13 Jul 2017

Plug Wrench Socket 14mm

Japan User(translated)

installed on

1/5

It can not be used for Duke 125.

The outer shape was thick, and it did not reach Plug.
Manufacturer also wanted to check not only the plug size but also the plug hole of the real car.
Everyone, please take care. View detail