Reviews
Fits: HONDA ADV150, HONDA Dio110, HONDA LEAD EX, HONDA PCX, HONDA PCX HYBRID, HONDA PCX150, HONDA LEAD125, HONDA LEAD125SPECIAL Knife
OEM Equivalent Product
Used for cap bolt packing of Oil Filter of LEAD125.
Installation was no problem and it is an OEM Equivalent Product. In addition, the price is lower than the OEM Product.
View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX125, HONDA PCX160, HONDA LEAD125, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX155
Driveline turnings
Mainly used for maintenance of Scooter and ADDRESSV125 drivetrain
Used for Belt replacement, Pulley replacement, Weight replacement, etc.
It is used as a detent by hooking it into a hole.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R, HONDA CRF450L, HONDA CRF250RX, HONDA CRF250R, HONDA CB125R, HONDA ADV160, HONDA PCX160, HONDA ADV150, HONDA PCX150, HONDA SHMODE, HONDA LEAD125, HONDA PCXHybrid, HONDA PCX125, HONDA glom, HONDA MONKEY125, HONDA GIORNO CREA
The knock pin are a part that do tend to sustain damage and is advisable to replace when this the case
About quality and texture - The pair of knock pins from K-Pit are made from steel and raw surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The knock pin is a part that do tend to sustain damage and is advisable to replace when this the case. This will ensure easier installation and removal of parts like the cylinder head, cylinder and crankcase halves when it comes time to overhauling the engine, as this is where they are used on the Honda Grom. Products to buy together - Key products to purchase when overhauling the engine would be gaskets and O-rings, all which are available from K-Pit here on Webike for the Honda Grom. Difficulty of installation - The installation of the knock pin is an simple task that took 0.1 of an hour to complete. Common sense and the use of your hands is all that is required to clean the mating surface and press the knock pin into place. Cost performance and comparison with other products - I find the cost of all the products K-Pit sell to great value when compared to what most other companies sell their products for and the knock pin is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the knock pin, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: HONDA CBR400R, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR125R, HONDA CBR250 R (MC41) FNo:MC41-1000001-1099999, HONDA INTEGRA FNo:RC71-1000001-, HONDA JAZZ, HONDA LEAD 110 FNo:JF19-1200001-, HONDA LEAD125, HONDA MAGNA 50 FNo:AC13-1000010-1599999, HONDA MAGNA 50 FNo:AC13-1600001-, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA NC750 FNo:RC70-1000001-, HONDA NC700 FNo:RC71-1000001-, HONDA NC700 FNo:RC63-1000001-, HONDA NC700 FNo:RC62-1100001-, HONDA NC700 FNo:RC62-1000001-1099999, HONDA NC700 FNo:RC61-1100001-
Cospa is nice.
O-ring for CROSS CUB (JA45) level gauge
Once a year or so, when oil stains from the threaded part of the Level gauge become noticeable, we replace it.
View detail
I feel like I've been cheated.
To be more precise, this tool can only be used to remove the Pulley side and to install the Clutch Side.
We don't use Rose's because it is Air, but we wanted to use it for Torque management when embedding...
I managed to fool them into thinking it was better than nothing.
View detail
Fits: HONDA CBR400R, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR125R, HONDA CBR250 R (MC41) FNo:MC41-1000001-1099999, HONDA INTEGRA FNo:RC71-1000001-, HONDA JAZZ, HONDA LEAD 110 FNo:JF19-1200001-, HONDA LEAD125, HONDA MAGNA 50 FNo:AC13-1000010-1599999, HONDA MAGNA 50 FNo:AC13-1600001-, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA NC750 FNo:RC70-1000001-, HONDA NC700 FNo:RC71-1000001-, HONDA NC700 FNo:RC63-1000001-, HONDA NC700 FNo:RC62-1100001-, HONDA NC700 FNo:RC62-1000001-1099999, HONDA NC700 FNo:RC61-1100001-
Oil Level Gauge O-Ring for the Grom
About quality and texture: I am happy with the quality of the oil level gauge O-Ring from K-Pit, made from a soft flexible rubber to help create a good seal. About the feeling of use: The previous owner had significantly over tightened the oil level gauge and damaged the O-Ring, the K-Pit O-Ring fits perfectly with zero leaks. Products to buy together: The timing and crankshaft hole cap O-Rings from K-Pit would also be desirable to purchase alongside oil level gauge O-Ring. Difficulty of installation: The process to install just takes a few minutes, remove the oil level gauge, be sure to discard the old O-Ring and then fit your new O-Ring that has been lubricated lightly with engine oil. Do not over tighten the oil level gauge as if only needs to be finger tight. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality part from K-Pit that was in stock and ready to ship unlike the Honda O-Ring but the K-Pit O-Ring is slightly more expensive. About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: View the Kitaco engine tuning and maintenance parts catalog to see what other maintenance parts K-Pit have to fit the Grom and the Monkey 125. View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX125, HONDA PCX160, HONDA LEAD125, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX155
ADDRESSV125S
Large change is helpful to work on it. I don't get to use it very often. View detail
If the payment is by Silver bank transfer, you will be contacted separately, I don't know how to contact you.
I don't know how to do Cancellation, give me your contact info. View detail
I would like to cancel this product.
How do I make a cancellation? View detail
I want to do Cancellation!
I'd like to cancel my reservationHow do I cancel my reservation? View detail
Cancellation
I'm pissed off, I can't cancel anyway, I want my Gold back. View detail
Cancellation.
This product can only be used for Honda motorcycles. View detail
Fits: HONDA CBR400R, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR125R, HONDA CBR250 R (MC41) FNo:MC41-1000001-1099999, HONDA INTEGRA FNo:RC71-1000001-, HONDA JAZZ, HONDA LEAD 110 FNo:JF19-1200001-, HONDA LEAD125, HONDA MAGNA 50 FNo:AC13-1000010-1599999, HONDA MAGNA 50 FNo:AC13-1600001-, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA NC750 FNo:RC70-1000001-, HONDA NC700 FNo:RC71-1000001-, HONDA NC700 FNo:RC63-1000001-, HONDA NC700 FNo:RC62-1100001-, HONDA NC700 FNo:RC62-1000001-1099999, HONDA NC700 FNo:RC61-1100001-
I think it's no different than OEMs
I'm a layman, but it's an OEM product 。 Be careful not to confuse it with the O-ring of the oil drain 。 No leaks or blotches, no problems View detail
HondaBENLY50110 Pulley
Honda BENLY 50110! Weight Roller for purchase, purchase! Honda car Scooter can be used in general, has become convenient. I need someone to keep me own View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX125, HONDA PCX160, HONDA LEAD125, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX155
Early, but ...
Unlike the Holder of the type to be tightened, unlike the Holder of the type to be tightened, if you adjust the Size, you can operate with One-touch so you can work efficiently, but the scenes that can be used will be limited as well.
I practically use it only when fastening Flywheel like a photo. In this usage case, this type of tool is faster because the operating angle is limited when tightening Type.
However, since it takes plenty of space in the tool box more than not to be used much, I can not recommend it except for those who can afford Space.
For those who are looking for the first tool to fiddle with Scooter or who want universal nature, we recommend Holder of type to be tightened.
http : / / www. webike. net / sd / 21784446 /
There is a Type with a "claw" on the inside with a tool similar to this, which can also be used for Pulley with teeth on the outer periphery, like Honda type, so this type is recommended here.
http : / / www. webike. net / sd / 21331222 /
As a digression, since the tool of this hand has no unified name, it is troublesome when searching. Universal holder, Pulley holder, Fly Wheel Holder, Scissor Holder, HandHolderetc. ...
View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX125, HONDA PCX160, HONDA LEAD125, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX155
It may be necessary for ScooterMaintenance
MAJESTYS 'V Belt - Weight Roller Purchase for replacement. High Speed ??Pulley was manufactured by DAYTONA among a number of Manufacturers, so we selected one made by DAYTONA. Because it was made by the same DAYTONA, the hole to be caught was Exactly. There is no problem at all in function, making is also firm and made by DAYTONA.
View detail
The tool which just exists only for a Honda.Unless the Pulley is a nail type, it cannot fix a GEAR type thing.If there are , however this, this one tool is sufficient in removal of a Pulley and a Clutch! You should have, if it is Scooter riding of
The tool which just exists only for a Honda.Unless the
Pulley is a nail type, it cannot fix a GEAR type thing.If there are
, however this, this one tool is sufficient in removal of a Pulley and a Clutch! You should have, if it is Scooter riding of the
Honda.The construction material of the
tool is also good and strong.
View detail
Although the One-touch Pulley holder was used for SEA-BASS vehicles until now, it purchased in order to open a gear Pulley peculiar to a Honda. It was able to open by putting both the sides firmly and turning them alternately with a Wrench. It can u
Although the One-touch Pulley holder was used for SEA-BASS vehicles until now, it purchased in order to open a gear Pulley peculiar to a Honda.
It was able to open by putting
both the sides firmly and turning them alternately with a Wrench.
It can use also for a Clutch outer and is a case of killing two birds with one stone.
View detail
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX125, HONDA PCX160, HONDA LEAD125, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX155
It used for Belt & Pulley exchange of the CREA SCOOPY. Also by me of moped decomposition experience Zero, it was able to use satisfactorily, looking at a Manual. Belt & Pulley exchange -- since it is required for both, if it is a User
It used for Belt & Pulley exchange of the CREA SCOOPY.
Also by me of
moped decomposition experience Zero, it was able to use satisfactorily, looking at a Manual.
Belt & Pulley exchange -- since it is required for both, if it is a User who exchanges especially a Pulley for an external article, even if he buys it together, there will be no loss.
View detail
It is an indispensable Items in the case of removing the Pulley of a GYRO system. Although the cheap import was also considered, I think or, if the form of the nail at a tip is compared, this one will think positively that a grip is good and a diffe
It is an indispensable Items in the case of removing the Pulley of a GYRO system.
Although the cheap import was also considered, I think or, if the form of the nail at a tip is compared, this one will think positively that a grip is good and a difference will appear also in durability.
Since there was also no bad Image although the tool made from a DAYTONA was used for
former etc., it purchased.
View detail