Reviews
![Brake Pads ROAD [SP]](https://thimg-afcc.kxcdn.com/@wth-shop/assets/photos/review/17363050841736305084625.jpeg)
Fits: HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-1 FAZER, YAMAHA FAZER8, YAMAHA FAZER8, SUZUKI BANDIT1250, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI SV1000 S, SUZUKI KATANA
Authentically product very good for the performance on the pads but not sure how long will it last and will it wear out my rear disc plate or not View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GSX400, SUZUKI ST250 E Type, SUZUKI ST250, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ESTRELLARSCustom, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100
Just right.
The Pipe Handlebar that came with my GPZ900R when I bought it was a little high, and although it was easy to use in touring positions, I felt that it could not hold the front tire on mountain passes, so I decided to replace it with a slightly lower handlebar. There was a handlebar that was lower, but it seemed to interfere with the OEM Hydraulic Clutch Master Cylinder, so I decided to go with the HURRICANE Flat Continental 2 type. The forward lean position is now just right.
However, because it is a Universal Product, the bar end is not KAWASAKI, and the Knock Pin hole on the switch box is not open, so we had to make various modifications.
View detail
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
Feels So Much Better Than OEM Grips!
My Yamaha SR400's OEM grips were too rigid and hard. These grips are very soft and pliable. It reduces the amount of force I need to apply to the handlebars and therefore gives me an easier time riding. It also feels very nice. The design of the grip is very much like the sole of all the Vans shoes out there. Looks cool but understated. View detail
Fits: HONDA CB400SF Version S, HONDA CB1100, HONDA VTR1000F, HONDA HORNET600, HONDA CBR900RR, HONDA CBR600F4i, HONDA CBR600F4, HONDA CB400SF, HONDA CB400SB, HONDA RVF400
I also purchased the Black color!
[How is it used?
When replacing the front fork with the Fork with SDBV, the caliper support was also replaced with the same color Black Anodized color because the bottom case is Black color.
Was the one you received as per Image?
As expected of an Active product, the quality and accuracy is excellent!
Was the installation difficult?
The Center comes out without Shim, so it can be easily set up by simply installing and replacing it.
How was your experience with it?
The image has become so black that it looks like a black edition, and the image is far from the original ideal FourSpec.
[Included Parts:were they on?
Bolt, Shim, etc. are included.
[Was there anything that disappointed you?
Not particularly
Black is said to show dirt, but Silver is the same, so I don't mind using it too much.
▼The Black Anodized color seems to be missing from the current Color variations, so it has become quite rare. I think there is a demand for it, so I hope it will be re-released!
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Warm and highly functional
Winter cold was unbearable, so we introduced this
I bought it because of its one-button design and the fact that the grips are not thickened.
I read the Instruction Manual, and it says that current cut can be done by the voltage drop of Idlingetc. (roughly from about 12V?).
No difference between OEM and Large in grip after installation
The Grip, which can be adjusted in 5 levels, is also very warm and good even with gloves on.
I think what needs to be taken into consideration when installing the system is to make sure that the electrical components already installed and the power consumption of this heater are large enough. (After all, the voltage tends to drop in winter.)
Other
Warmth is on the inside of the hand, so windproofing is necessary for those who care about it.
→Use with Hand guard, HandlebarWarmer and electric heating gloves
Difficult to install by an individual.
→Motorcycle shops are sure to do it.
That is the point to note.
In general, I am glad I bought it!
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
Installed on a CB400SFNC422013
I bought it because I fell standing up and Wound was in the house! View detail
Fits: HONDA CBX125F, HONDA NSR250R, HONDA CBR250R, HONDA VFR400R, HONDA Integra, HONDA CBR400R, HONDA SUPER BOLDOR, HONDA CBR300R, HONDA RVF400, HONDA CB400SB, YAMAHA TZM50R, YAMAHA YZF-R125, YAMAHA TZR250, YAMAHA YZF-R15, YAMAHA YZF-R25, YAMAHA FAZER, YAMAHA FZR400RR, YAMAHA YZF-R3, YAMAHA YZF-R6, YAMAHA XJ6
a great upgrade for both style and safety!
The Cowl Mirror Type 2 is easy to install and fits perfectly on my CB400SB. The sleek black design adds a stylish touch, and the built-in LED blinkers are a great feature, ensuring visibility to other drivers. The mirrors offer a wide, clear view, both day and night, and are lightweight, making them a solid replacement for damaged mirrors. However, unlike the OEM mirrors, these aren't foldable, which could be a slight disadvantage if you're looking for that functionality. View detail
Simple Yet Stylish Upgrade
The Kitaco Frame Cap is a simple yet effective way to enhance the engine area of my bike. Made from machined aluminum with an anodized finish, it looks sleek and durable. Installation is a breeze—just replace the pivot caps on both sides of the frame. These frame caps come with O-rings for a secure fit and really add a nice accent to the engine area without being too flashy. It’s a great, low-effort upgrade for those looking to dress up their bike with some extra style. Highly recommend for anyone looking for an easy engine area upgrade!About quality and texture View detail
Fits: YAMAHA MT-07, SUZUKI SV650, HONDA CB1100EX, HONDA CB1100EX, HONDA CB1100EX, KAWASAKI ZRX1200R, KAWASAKI ZEPHYR750, KAWASAKI BALIUS2, KAWASAKI ZEPHYR400X, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1200DAEG, YAMAHA SR400, YAMAHA XJR1300, YAMAHA XJR400R, YAMAHA MT-07, HONDA HORNET250, HONDA CB400SB, HONDA VTR250LD, HONDA VTR250, HONDA CB1300SF
Not Recommended for CB400SB - Requires Extensive Modifications
I installed the EFFEX Super Bar Daytona Type-6 on my CB400SB, but I’m not satisfied with the outcome. While it’s advertised as compatible, I had to change the cables, and even then, the brake cables and switch wires needed to be extended, which wasn’t mentioned. It ended up being a hassle, and I had to buy additional cables, which felt like a waste of money. After all the modifications, I decided to remove these bars and go for another handlebar instead. In my opinion, this upgrade isn’t worth it for the CB400SB, especially if you’re not looking for a lengthy modification process. View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Useful for ChainMaintenance
I use J trip's MaintenanceSTAND, but had some concerns about the vehicle going up and down.
If Center Stand, then Quantity:Pair (for Left and Right) It is not necessary to check for the "I" and it goes up easily as long as the foot lands on the ground.
With the installation of the OEMCenter Stand, the MaintenanceSTAND has become an exclusive product for the eldest son ^_^;.
About installation
If you want to follow the installation manuals available on our website, you will need to be very strong.
The assembly was done in a different order than in Manual.
For installation, you can refer to the various information available on the Net.
When fitting the StopperRubber into the STAND, it is easy to use a vice sold at Daiso or other stores.
View detail
Fits: SUZUKI GSX1400, SUZUKI GSX-R1000, HONDA NSR250R, HONDA 400X, HONDA CB1100, HONDA CB250F, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA CBR400R, HONDA CBR600F, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA VFR400R, HONDA VFR800, HONDA VT250 SPADA, HONDA X11, HONDA X4, HONDA DREAM50
It looks nice.
The instruction manual is not included, but I was able to install it easily by comparing it with the OEM footpeg. I painted the moving parts with Grease that I had on hand. It is a little longer than the OEM footpeg, so it sometimes hit my leg when I stopped, but I don't mind once I get used to it.
Brakes are now easier to apply.
View detail
Fits: HONDA FORZA, SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900
Nice！！Bar End
After replacing this Bar End
I believe the vibration has been reduced by 2-30% from NORMAL!
Good product!
View detail
![Engine Case Guard Kit Generator Cover [PRO SHIELD]](https://img.webike-cdn.net/catalogue/images/56901/280-450-0100_01_TS.jpg)
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR
Excellent
Excellent quality and material. Extremely easy to install with easy to understand instruction manual. Some specific tools needed to install such as torque wrench but no other issues. View detail
Fits: HONDA MSX125, HONDA MSX125SF, HONDA VTR250-F, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROMThailandSpec., SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, HONDA CBR400R, HONDA CBR400R, HONDA CB400SF, HONDA CB400SB
Good quality and functionality, but expensive.
Rear Sets are too expensive to buy.
I purchased this product which can change the footpeg position.
I am satisfied with the quality and functionality, but the price is a little high
This is a point of dissatisfaction.
Replaced from OEM so it looks better.
When using riding shoes
The operability of the Change lever has been improved.
View detail
Fits: HONDA CB400 Superfor, HONDA CB400 Super Boldor
Cospa is the best!
This is my second purchase.
HondaOEM
↓
KIJIMA
↓
KIJIMA
And so on
The paint is glossy.
The Fall down degree does not distort it,
When there is a slight velocity, the part of the lower part of the Engine that is in contact with the Frame distorts and bends to absorb the impact.
I bought it here because it was Point-wise a better deal than Amazon.
The bank angle will be shallower, but it is a good Knee Slider.
After use, the paint luster will disappear and the paint will rust in the areas that come in contact with the lower part of the Frame.
But with a fresh coat of rust inhibitor, there is no problem.
View detail
Very good quality
The quality and fitment of this FI cowl is 10/10. Very nice for a custom product. It fits just like oem fi cowl. Highly recommended View detail
Fits: HONDA X4, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB400 Super Four HYPER V-TEC, HONDA X-11, HONDA CBR600F2, HONDA CB1300 Super Four ABS SE, HONDA GL1800, HONDA CB600S, HONDA GOLDWING F6C, HONDA VT1300CX, HONDA VT1300CT, HONDA VT1300CS, HONDA VT1300CR, HONDA CB1300 Super Touring, HONDA CB1300 Super Bold'or ABS SE, HONDA CB1300 Super Bold'or, HONDA ST1300, HONDA CB1100 EX, HONDA CTX1300
It is chic, textured, and Exactly on CB!
[How is it used?
Since the NORMAL cap is Silver, I was worried about Silver, but chose the same Black color as the MASTER.
Was the one you received as per Image?
Accuracy and texture are high, chic and Parenthesis nice.
Was the installation difficult?
It can be easily installed by simply replacing the cap with a NORMAL cap.
If Fluid adheres, it should be washed with water immediately.
How was your experience with it?
The chic design makes it an Exactly Image for the classic CB1100.
Anodized treatment has been applied, so the color is beautiful.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
The price is high. Many other MORIWAKI products are used, and this is unstoppable for the sake of unity.
The color lineup includes Silver, Gold, and Black, all of which are attractive, so it is difficult to decide which color to choose.
View detail
![Compact Half Cover [Medium]](https://img.webike-cdn.net/catalogue/images/91554/22133_TS.jpg)
Fits: その他 , YAMAHA MT-09, YAMAHA NMAX, HONDA XR50Motard, HONDA NSRMini, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GS125 KATANA, SUZUKI GN125E, SUZUKI RGV250γ SP, SUZUKI Gixxer 150., KAWASAKI Z250FT, SUZUKI RGV250γ-SPII, SUZUKI RGV250γ-SP, SUZUKI RGV250γ, SUZUKI RGV250γ, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI NZ250S
It was immediately useful!
I bought it just before I left for an overnight touring trip, because the weather forecast was doubtful and the parking lot where I would be staying was likely to be outdoors.
Sure enough, it rained the night we stayed there. just keeping the Seat and Light dry makes a difference in peace of mind.
Also, since it becomes Compact when put away, storage is not so troublesome.
View detail
![PREMIUM ZONE Master Cylinder Tank Cap [NISSIN Φ59].](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0171/22540883_1_TS.jpg)
Fits: HONDA RVF750R, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14R(High Grade), HONDA VFR800, HONDA CBR1100XX, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100, HONDA CB1300ST, HONDA CB1300SB, HONDA CB1300SF, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-9R, KAWASAKI Ninja ZX-10R, HONDA RVF400R
A quick dress-up
The OEM master cylinder cap is not so designable, so this product can be used for a subtle dress-up. View detail
Fits: HONDA CBR600 RR, HONDA CB400 SF, HONDA CB400 SB, HONDA CB1300 SF, HONDA CB1300 SB, HONDA XL700 V TRANSALP ABS, HONDA XL700 V TRANSALP, HONDA XL1000 V VARADERO, HONDA VTR250, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA VFR1200 F, HONDA VFR1200 F DCT, HONDA CBR954 RR, HONDA CBR600 RR C-ABS, HONDA CBR600 F4i, HONDA CBR250 R 10-13, HONDA CBR1000 RR, HONDA CBF1000 ABS, HONDA CBF1000
A quick dress-up
I changed the bolt on the tank cap to red. I like the red because it stands out against the black body of the car. View detail