Reviews
Fits: HONDA CBR650R, HONDA CBR600RR, HONDA C125, HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D2, HONDA CRF250R, HONDA CRF250RX, HONDA GL1800, HONDA GL1800D, HONDA NCW50, HONDA PCX150, HONDA Z125M, HONDA CN250, HONDA CHF50S, HONDA CHF50PS
They has done their job securing the oil separator plate onto the right crankcase half
About quality and texture, I can confirm that the quality is great and that the material used is steel with a zinc coating. About the feeling of use, Two 16mm flanged bolts are needed for the new engine that I am building from newly purchased parts from Honda. They has done their job securing the oil separator plate onto the right crankcase half. Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart and the one to purchase together to complete the installation of the flanged bolts is the oil separator plate. Difficulty of installation, I can say the fitment of the flanged bolt for my installation was very easy due to already having access as the crankcase half is new and the process is explained in the service manual which is to be tightened to the required torque value. Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda flanged bolt that will be suitable for engine builds and repairs and I do not see this being offered any cheaper elsewhere. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA REBEL, HONDA goldwing, HONDA BENLY CD125T (BENLY50), HONDA CB125R, HONDA CB125T, HONDA CB223S, HONDA CB400SS, HONDA CBR125R, HONDA CBR250RR, HONDA CBR250RR (ABS), HONDA CD250U, HONDA CL400, HONDA FTR, HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB400, HONDA GB500, HONDA GOLDWING, HONDA GOLDWING (GOLD WING), HONDA GOLDWING F6B (GOLD WING), HONDA GOLDWING F6C (GOLD WING)
must buy item
About quality and texture 10/10 About the feeling of use 10/10 Products to buy together 10/10 Difficulty of installation 5/10 Cost performance and comparison with other products 5/10 About shipping and packaging 5/10 View detail
Fits: HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA goldwing, HONDA goldwing, HONDA goldwing, HONDA BENLY CD125T (BENLY50), HONDA CB125R, HONDA CB125T, HONDA CB125T, HONDA CB223S, HONDA CB223S, HONDA CB400SS
MUST BUY CUSTOM PARTS
About quality and texture 10/10 About the feeling of use 10/10 Products to buy together 10/10 Difficulty of installation 5/10 Cost performance and comparison with other products 5/10 About shipping and packaging 5/10 Any concerns, cautions, or advice when purchasing 5/10 View detail
![Compact Half Cover [Medium]](https://img.webike-cdn.net/catalogue/images/91554/22133_TS.jpg)
Fits: その他 , YAMAHA MT-09, YAMAHA NMAX, HONDA XR50Motard, HONDA NSRMini, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GS125 KATANA, SUZUKI GN125E, SUZUKI RGV250γ SP, SUZUKI Gixxer 150., KAWASAKI Z250FT, SUZUKI RGV250γ-SPII, SUZUKI RGV250γ-SP, SUZUKI RGV250γ, SUZUKI RGV250γ, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI NZ250S
It was immediately useful!
I bought it just before I left for an overnight touring trip, because the weather forecast was doubtful and the parking lot where I would be staying was likely to be outdoors.
Sure enough, it rained the night we stayed there. just keeping the Seat and Light dry makes a difference in peace of mind.
Also, since it becomes Compact when put away, storage is not so troublesome.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
cheap
Drain Plug Washer's Other Brand Products are often sold in bulk.
OEM is cheap and Quantity:It is best because you can get it from 1pc.
View detail
![Hanshin Tigers Collaboration Chain Gold & Black [Caulked (ZJ) Joint Included]](https://img.webike-cdn.net/catalogue/images/108868/525tiger_G&B_P_togo_C_TS.jpg)
Fits: APRILIA Caponord 11-16, APRILIA DORSODURO 750 Factory, APRILIA ETV1000 CAPONORD, APRILIA MANA850, APRILIA PEGASO 2 93-96, APRILIA PEGASO 3 97-00, APRILIA PEGASO 90-91, APRILIA PEGASO ie 01-04, APRILIA PEGASO650 STRADA, APRILIA PEGASO650 TRAIL 07, APRILIA RST1000 FUTURA, APRILIA RSV1000, APRILIA RSV1000R DREAM 04-05, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV4 R ( FACTORY ) 09, APRILIA RSV4 R APRC ABS, APRILIA RSV4 RF / RR 15-16
If you're a Hanshin fan...
If you are a Hanshin fan, this is the Items you should choose.
It is a reliable DID.
Appeal feeling is less, but it is motivating.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL
Grommet
Grommet to be attached to the side of the Fuel Tank, purchased because I seem to have lost it when taking it off and on.
It is just a Cushion for protection, but it is a HONDAOEM Product and not that cheap.
View detail
Fits: HONDA CB350, HONDA CB450, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CBX125, HONDA CBX750P E, HONDA CN250, HONDA CN250, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR250, HONDA CR250, HONDA CR250
Another Great Quality Honda Part
Another Quality Honda part that has been use to bring another honda motorcycle back to life. This part was crictial to maintaining the quality that honda produced fromt the factory View detail
Fits: HONDA GB500 A, HONDA GB500 AC
You're early!
Fast delivery!
The products are reliable ManufacturerOEM.
It was purchased and installed in conjunction with Front forkOverhaul.
View detail
Fits: HONDA CBX1000, HONDA V45 MAGNA, HONDA VF750F, HONDA CBX750F BOLD'OR, HONDA CBX750F, HONDA CBX750 HORIZON, HONDA CB750FC, HONDA CB750FB, HONDA CB750F INTEGRA, HONDA CB750F BOLD'OR II, HONDA GB500, HONDA FT500, HONDA WING GL400 CUSTOM, HONDA WING GL400, HONDA VF400F INTEGRA, HONDA NS400R, HONDA GB400TT, HONDA VT250F INTEGRA, HONDA CBR400F, HONDA NS250R
A great product for old cars.
The braking power of the old NORMAL is not as good as the current Motorcycle, but I bought it hoping that even a 10% increase in braking power would help.
I am very satisfied with the product. I cannot comment on the durability of the product since it is still in use, but I am satisfied with Site's assortment of products as well.
View detail
Fits: APRILIA Caponord 11-16, APRILIA DORSODURO 750 Factory, APRILIA ETV1000 CAPONORD, APRILIA MANA850, APRILIA PEGASO 2 93-96, APRILIA PEGASO 3 97-00, APRILIA PEGASO 90-91, APRILIA PEGASO ie 01-04, APRILIA PEGASO650 STRADA, APRILIA PEGASO650 TRAIL 07, APRILIA RST1000 FUTURA, APRILIA RSV1000, APRILIA RSV1000R DREAM 04-05, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV4 R ( FACTORY ) 09, APRILIA RSV4 R APRC ABS, APRILIA RSV4 RF / RR 15-16
First Chain Exchange
Very solid product, beautiful texture.
I haven't run it yet, but I'm really looking forward to it.
View detail
Fits: HONDA GB500 A, HONDA GB500 A, HONDA GB500 AC, HONDA GB500 AC
Defective, not working
I purchased a Honda OEM ignition coil on October 30 and replaced it today, but the engine will not start. The part number was 611 for the ordered product but 405 for the received product. the service manual value is 0.8Ω for primary coil and 4KΩ for secondary coil, but the received product is 0.4Ω and 3KΩ. Returns will not be accepted with a deadline of yesterday.
I trusted webik.
View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100S, HONDA CB900F
Genuine Radial Ball Bearing for CBR600RR 2003
This was another of the parts I needed for the rebuild of the swingarm on the CBR600RR. Although the bearing was not too bad, there was visible corrosion on the outer race which I do not like. No point in trying to buff it off as once it sets in, it will always come back. Besides, if you take off too much material, it will affect the seating position of the part anyway. I found the right bearing by using Honda schematics. Webike did not have this in stock but it literally took 3 days for them to get it and ship my order. With the other parts for this rebuild, I had all shipped at the same time so I would get all the parts I needed together. In literally 5 days from being shipped the order arrived. EMS are just that quick. My bearings were expertly packaged and inside a padded out envelope. The bearing also came in the Honda standard packet. Much like the needle bearing, the dimensions were spot on. The finish on the outer race was smooth and free form any marks or debris. The ball bearings you could see were well packed with grease so ran free and evenly. Not really much else I can say. Top Honda quality throughout. Very pleased with my purchase. View detail
![ZVM-X2 Series Chain 525ZVM-X2 Steel [with Caulking (ZJ) Joint]](https://img.webike-cdn.net/catalogue/images/116443/525st_TS.jpg)
Fits: SUZUKI GSX-S750, YAMAHA YZF-R6, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA MT-10, YAMAHA MT-10, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZR400, YAMAHA FZ8, YAMAHA FZ8, TRIUMPH TT600 (TRIUMPH), TRIUMPH TIGER800XC, TRIUMPH TIGER800
good
Good ---------------------------------------- Good Powered by Google Translator View detail
Fits: SUZUKI GSX-S750, YAMAHA YZF-R6, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA MT-10, YAMAHA MT-10, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZR400, YAMAHA FZ8, YAMAHA FZ8, TRIUMPH TT600 (TRIUMPH), TRIUMPH TIGER800XC, TRIUMPH TIGER800
Chain purchase
Delivery is fast and the product is good.
I like it
I think you can trust and buy it.
For Africa Twin
I bought it and it is dct
Other parts next time
I have to use this site
Reliable quality and fast delivery
I think it's an advantage of Webike
Good luck ------------------------------------------- Fast delivery and good product I like it I think you can trust and buy it. For Africa Twin I purchased it and it is dct, Other parts next I need to use this site Reliable quality and fast delivery I think this is an advantage of WeBike. take care Powered by Google Translator
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA XJR400RII, YAMAHA DIVERSION, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJ400ZE, YAMAHA XJR400, YAMAHA XJ400Z, YAMAHA XJ400ZS, YAMAHA XJ400D, YAMAHA XJ400S, YAMAHA XJ400, YAMAHA SR400, YAMAHA FZR400RR-SP, YAMAHA FZR400RR, YAMAHA FZR400, YAMAHA FZR400R, YAMAHA FZR400
Motorcycle Cover
I bought this as a Cover for my XSR900 RN80J.
In my case, I keep my motorcycle in a warehouse and use the Cover not for rain and wind but for dust and small animals, so this is enough.
The size feels a little too Exactly and I would have preferred it to be a little looser.
Unfortunately, I have purchased and used another Size before, and there is a lint-like substance left on the inside of the Motorcycle, and when I put the Seat on and remove it, the lint gets on the Motorcycle. I would like to see something done about this.
View detail
Fits: HONDA CBX400F, HONDA CBX400F, HONDA CB650, HONDA CB650, YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA TZR50R, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZR125, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400
StemBall
Used for SEA BASSTS125HUSTLER in 79.
We are happy to supply these parts as they will be replaced as the mileage increases.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Mounted on RZ50
I have a handlebar with a HURRICANE separator.
It is better to use an adhesive such as Aron Alpha because it is loose when installed normally in that condition.
Note that the Blue I chose for the color of Grip's Design is lighter than the picture.
View detail
![[STD Lever] Brake Master Cylinder Kit [Horizontal Type 1/2-inches/Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61742_TS.jpg)
Fits: YAMAHA Cygnus X SR, HONDA FTR223, HONDA CRM250R, HONDA CRM250AR, HONDA CBX250RS, HONDA CBX400F, HONDA CBR600F, HONDA CBR400RR, HONDA MBX125F, HONDA GB500, HONDA GB250 Clubman, HONDA GB400, HONDA CBR400R, HONDA CBR400F, HONDA CBR250R (MC17/19), HONDA CBR125, HONDA CBR1000F, HONDA CBR1000F, HONDA CB250RS, HONDA 400X
Replacement from languid OEM
Used for Honda XELVIS.
The brake had been without maintenance for a long period of time, so the cylinder was worn out and the touch was very uncomfortable! OEM parts are available, but I chose NISSIN's standard parts.
No changes to the pitch or angle of the banjo bolt are required for installation.
We were able to work without any Hurdle.
The good points are that it looks nicer and BrakeTouch has been fixed to be squeaky clean and natural. I don't really feel that it improves braking power or controllability.
However, since it can grip naturally, the sense of security of Hard brake in Winding is strong.
The only point of concern is that the included Reserver tank is a bit large, too large for 250cc, and I would like to replace it. And the lever is longer than OEM, so it is a little unbalanced compared to Clutch (not much difference in appearance). It might be better to shorten it too.
However, this series from NISSIN has a wide variety of Aftermarket parts and Repair Parts, so it is nice to be able to fix everything that is bothering you.
In general, out-of-print MASTERs are often quite rickety, and replacing only the cylinder is a bit of a hassle because of the need for special tools and hangers. It is recommended for restorers.
View detail
Fits: その他 , YAMAHA MT-09, YAMAHA NMAX, HONDA XR50Motard, HONDA NSRMini, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GS125 KATANA, SUZUKI GN125E, SUZUKI RGV250γ SP, SUZUKI Gixxer 150., KAWASAKI Z250FT, SUZUKI RGV250γ-SPII, SUZUKI RGV250γ-SP, SUZUKI RGV250γ, SUZUKI RGV250γ, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI NZ250S
It can be used quickly and easily at touring destinations.
It can also be used in case of sudden rain while on the road.
Compact and portable.
View detail