
Reviews

Fits: GASGAS MC125, GASGAS MC250F, GASGAS MC450F, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC150, HUSQVARNA TC250, HUSQVARNA TC300, HUSQVARNA TE125, HUSQVARNA TE150, HUSQVARNA TE250, HUSQVARNA TE300, HUSQVARNA TX300, KTM 125EXC
Mounted on KTM EXC
The product was good, but the adjustment range was narrower than OEMbrembo's and the Clutch was too far away from the OEM.
Then I thought of replacing the screw with the OEM one, but the OEM screw is larger in diameter and cannot be replaced.
Very Large hands (I'm also a very Large person). If so, I don't think you would mind, but I ended up going back to OEM because it became harder to do when applying the semi-crafters.
Also, the collar that came with the Clutch Side did not fit into the lever and had to be reassembled by the OEM.
View detail

Fits: BMW K1200 R, BMW HP2 Megamoto, BMW HP2 Sport, BMW HP2 Sport, BMW HP2 Megamoto, BMW HP2 Enduro, BMW HP2 Enduro, BMW HP2 Enduro, APRILIA SRV 850, APRILIA SRV 850 ABS ATC, APRILIA RX125, APRILIA RX125, APRILIA RST1000 Futura, APRILIA MX125 Cross, DUCATI Multistrada Enduro, MOTOGUZZI Griso 1100, YAMAHA XMAX300, Others Off Road Caliper P2 28 (Code XQ21361), Others VR250 Super,Otard, Others VR250 Enduro
It works better than ZETA's Pad!
I installed it on my gasgas EC250 which I always use for forest road touring.
I used to use ZETA Brake Pads, but I had a symptom that the brake did not work too well on descents, and my arms would go up when I rode for a long time or during high-load Situations such as Race.
So I started working on improving Brake and the first thing I bought was Brake Pads.
It was not a drastic improvement, but it works better than ZETA's Pad, and it can stop with a little less Speed in Downhill, etc. However, I still have the impression that a little more StopPingPower would be nice.
View detail

Fits: HUSQVARNA FC250, HUSQVARNA FE250, GASGAS MC250, HUSQVARNA FX450, GASGAS MC125, KTM 250XC-F, KTM 300XC TPI, KTM 250XC-W TPI, KTM 250XC-W, KTM 200XC-W, KTM 150XC-W/TPI, KTM 350XC-F, KTM 125XC-W, KTM 250XCF-W, KTM 300XC-W, KTM 300XC-W TPI, HUSQVARNA TC250, HUSQVARNA TC125, KTM 500XCF-W, KTM 350XCF-W
Improved Brake grip comfort
I installed it on my gasgas EC250 which I always use for forest road touring.
The OEM Brake lever did not give me a good supplemental grip, so I bought this lever to try it out.
Fit feeling of the fingers is good, and the feel when operating the Lever is very much improved.
Furthermore, the fact that the lever is foldable makes it difficult to break, which is good, and reduces the number of troubles during touring on forest roads.
The quality is good and I like the Large change.
The only drawback is that the price is very high.
View detail

Fits: HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FE450, HUSQVARNA FE501, HUSQVARNA FE501, HUSQVARNA TC125, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE150
It can be used in the same way as OEM.
It does not have any special features and can be used without problems just like the OEM. View detail

Fits: HUSQVARNA TC125, HUSQVARNA TE511, HUSQVARNA WR125, KTM 125EXC, KTM 125EXC, KTM 125SX, KTM 125SX, KTM 144SX, KTM 150SX, KTM 150XC, KTM 200EXC, KTM 200EXC, KTM 200XC, KTM 200XC, KTM 200XC W, KTM 200XC W, KTM 250EXC-F, KTM 250SX, KTM 250SX, KTM 250SX-F

Short Type is easy to use and seems to be strong.
This product is a Short Type Brake lever with a high quality feel, easy to replace with an OEM Product, and can be dress-up! View detail

Fits: HUSQVARNA TC125, HUSQVARNA TE511, HUSQVARNA WR125, KTM 125EXC, KTM 125EXC, KTM 125SX, KTM 125SX, KTM 144SX, KTM 150SX, KTM 150XC, KTM 200EXC, KTM 200EXC, KTM 200XC, KTM 200XC, KTM 200XC W, KTM 200XC W, KTM 250EXC-F, KTM 250SX, KTM 250SX, KTM 250SX-F

速い配達、良いパッキング、リーズナブルな価格、高品質の製品 View detail

Fits: BMW K1200 R, BMW HP2 Megamoto, BMW HP2 Sport, BMW HP2 Sport, BMW HP2 Megamoto, BMW HP2 Enduro, BMW HP2 Enduro, BMW HP2 Enduro, APRILIA SRV 850, APRILIA SRV 850 ABS ATC, APRILIA RX125, APRILIA RX125, APRILIA RST1000 Futura, APRILIA MX125 Cross, DUCATI Multistrada Enduro, MOTOGUZZI Griso 1100, YAMAHA XMAX300, Others Off Road Caliper P2 28 (Code XQ21361), Others VR250 Super,Otard, Others VR250 Enduro

The compatibility chart is wrong.
I searched for a product that fits BMW K1300S, and VD-947JL was displayed, so I bought it. The part number of OEM pad for K1200S, K1200R, K1300S, and K1300R is the same, and the part number for K1300S is also the same. The part number of OEM pad for K1200S, K1200R, K1300S and K1300R is the same, so I think you should use ZV-VD947/2JL which has different thickness inside and outside as well as OEM pad.
I am satisfied with the performance of the Pad, but this will shorten its life.
View detail

Fits: BMW K1200 R, BMW HP2 Megamoto, BMW HP2 Sport, BMW HP2 Sport, BMW HP2 Megamoto, BMW HP2 Enduro, BMW HP2 Enduro, BMW HP2 Enduro, APRILIA SRV 850, APRILIA SRV 850 ABS ATC, APRILIA RX125, APRILIA RX125, APRILIA RST1000 Futura, APRILIA MX125 Cross, DUCATI Multistrada Enduro, MOTOGUZZI Griso 1100, YAMAHA XMAX300, Others Off Road Caliper P2 28 (Code XQ21361), Others VR250 Super,Otard, Others VR250 Enduro

Used for EnduroMachine
[How is it used?
I used it for EnduroMachine.
I'm still using it.
How was your experience with it?
I used it on my Enduro for 8 hours and it worked decently even on steep hills.
Excellent cost-per-performance!
The performance is good enough to be used in the race, so if you are riding on the street, you should have no problem.
View detail

Fits: KTM 125SX, KTM 125XC-W, KTM 150SX, KTM 150XC-W, KTM 250EXC-F, KTM 250EXC-F, KTM 250SX, KTM 250SX, KTM 250SX-F, KTM 250SX-F, KTM 250XC, KTM 250XC, KTM 250XC-F, KTM 250XC-F, KTM 250XC-F, KTM 250XC-F, KTM 250XC-W, KTM 250XC-W, KTM 300EXC, KTM 300EXC

Used for HUSQVARNA TE250 2016
I purchased it because I used the Clutch lever broken.
The portion hitting the finger of Lever felt wider than the OEM.
I thought that I wanted a fit feeling of the finger a bit more curved.
View detail

Fits: BMW K1200 R, BMW HP2 Megamoto, BMW HP2 Sport, BMW HP2 Sport, BMW HP2 Megamoto, BMW HP2 Enduro, BMW HP2 Enduro, BMW HP2 Enduro, APRILIA SRV 850, APRILIA SRV 850 ABS ATC, APRILIA RX125, APRILIA RX125, APRILIA RST1000 Futura, APRILIA MX125 Cross, DUCATI Multistrada Enduro, MOTOGUZZI Griso 1100, YAMAHA XMAX300, Others Off Road Caliper P2 28 (Code XQ21361), Others VR250 Super,Otard, Others VR250 Enduro

OEM replacement is sufficient
Regardless of the weather, I feel that it shows stable performance.
In the case of luxury goods, they are being chamfered, but since this product has not been done, squeal etc etc. Measures are necessary if you are concerned.
View detail

Fits: HUSABERG FE300 (11), HUSABERG FE250 (13 - 14), HUSABERG FE/SE, HUSABERG FC501, HUSABERG FC, HUSABERG 600ESM, HUSABERG 501ESM, DUCATI MONSTER695, DUCATI MONSTER S2R, HUSABERG FE450e, HUSABERG FE450e, HUSABERG FE450 (09 - 13), HUSABERG FE450 (09 - 11), HUSABERG FE390, HUSABERG FE350 (13 - 14), HUSABERG FE350 (-11), HUSABERG FE501 (13 - 14), HUSQVARNA WRE125, HUSQVARNA WR300 (09 - 14), HUSQVARNA WR300 (09 - 10)

Pad for town riding, touring is perfect.
It is an exchange from the OEM's Pad. Since OEM is Resin pad, there are many dusts, and braking power is also not enough at all and becomes uneasy. Even if I grasp the operation feeling very badly, since the braking power does not start up, I was scared to ride. Once it's brembo (Lol)
This Caliper replaces the Mega alloy which seems to be the most braking power and operation feeling. Previously I liked Golden Pad and thought that personality was quite similar.
The braking force gradually increases from the beginning of the handgrip, and it can be effective as much as you want. In addition, the strength can be properly controlled even during braking, Breaking can be safely done leaving until the beginning of the bank. I am very satisfied with less Dust.
Just keep on pushing at full throttle, the braking force will fall a bit, so I think it's best for Touring + α. (It may be due to Brake fluid. )
View detail

Fits: APRILIA RST1000 FUTURA, DUCATI MONSTER S2R, DUCATI MONSTER400, DUCATI MONSTER695, HUSABERG 501ESM, HUSABERG 600ESM, HUSABERG FC, HUSABERG FC501, HUSABERG FE/SE, HUSABERG FE250 (13 - 14), HUSABERG FE300 (11), HUSABERG FE350 (-11), HUSABERG FE350 (13 - 14), HUSABERG FE390, HUSABERG FE450 (09 - 11), HUSABERG FE450 (09 - 13), HUSABERG FE450e, HUSABERG FE450e, HUSABERG FE501 (13 - 14), HUSABERG FE501e

I bought it for YZF-R 125
I ran about 2000 km, but with the same performance as the OEM, I use it with confidence.
After that, I am concerned about durability. I would like to purchase again if it is okay.
View detail

Fits: APRILIA RST1000 FUTURA, DUCATI MONSTER S2R, DUCATI MONSTER400, DUCATI MONSTER695, HUSABERG 501ESM, HUSABERG 600ESM, HUSABERG FC, HUSABERG FC501, HUSABERG FE/SE, HUSABERG FE250 (13 - 14), HUSABERG FE300 (11), HUSABERG FE350 (-11), HUSABERG FE350 (13 - 14), HUSABERG FE390, HUSABERG FE450 (09 - 11), HUSABERG FE450 (09 - 13), HUSABERG FE450e, HUSABERG FE450e, HUSABERG FE501 (13 - 14), HUSABERG FE501e

I installed it in YZF-R 125.
Since Front Brake Pads is gone, I searched for Brake Pads that match performance with performance, I found this product. The feeling is Touch which is almost the same as NORMAL, so only durability is left. View detail

Fits: HUSQVARNA WR125, HUSQVARNA TC250, HUSQVARNA TE511, KTM 400EXC, KTM 450EXC, KTM 450EXC_RACING, KTM 450EXC-R, KTM 300EXC, KTM 300EXC TPI, KTM 250EXC TPI, KTM 250EXC_RACING, KTM 250EXC, KTM 200EXC, KTM 525SX_RACING, KTM 125EXC, KTM 505SX-F, KTM 525SX, KTM 300XC, KTM 300XC TPI, KTM 150XC

[Webike Monitor] It has structure which moreover does not break easily at a low price than brand-name parts. It is easy to grasp the form of a Lever.
[Webike Monitor] It has structure which moreover does not break easily at a low price than
brand-name parts.
It is easy to grasp the form of a Lever.
View detail