Reviews
![Brake Pad - OFF-ROAD [SD] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0296/23955287_20220325132906085_TS.jpg)
Fits: YAMAHA XT660Z Tenere, TM 4T, ROYAL ENFIELD , KTM 660LC4, KTM 300EXC, KTM 250EXC, HUSQVARNA SM630R, HUSQVARNA TE125, HUSQVARNA TE E LT, HUSQVARNA SM125, HUSQVARNA SM S 4T, HUSQVARNA SM S, HUSQVARNA SM, HUSQVARNA FE501, HUSQVARNA FE450, HUSQVARNA FE350, KTM SXC, KTM SXS, KTM SX, KTM SX-F
Who can use it for Off series Brembo caliper.
Used for TM Racing EN250 4T.
Fits brembo's Caliper for Off cars.
The abrasive itself was quite hard, so I expect it to be durable.
View detail
Fits: HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, KAWASAKI KLX230, KAWASAKI Ninja 650, KAWASAKI Ninja ZX-6R (ZX636)
Always I am indebted
As long as you have Kashimaru-kun, you can finish the Chain exchange in a jiffy!
This time, it was Piece stuffing with Sprocket change, so I also did Cut.
Takes about 30 minutes
Kashimaru-kun is a little expensive, but I recommend it because you can easily do the Chain replacement work at home.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
For Chain installation.
I removed the OEMChain, cleaned and oiled it. I did not have a Caulking Tool when I re-installed it, so I chose the Clip type. I was satisfied with the easy installation. View detail
![ERSeriesChain 520ERVT Gold [with Clip(FJ)Joint].](https://img.webike-cdn.net/catalogue/images/63583/520ERVT_G_G_P_TS.jpg)
Fits: HONDA CRF250M, HONDA CRF250R, HONDA CRF450L, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, SUZUKI RM-Z450, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, KAWASAKI KLX230, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX450, HONDA AX-1, HONDA CR125, HONDA CR125
DID Daido ERSeriesChain 520ERVT Gold
Compared to the Non-seal Chain, it has a little more weight, friction, and initial elongation, but seems to have less rotational noise.
I really like the texture of the Gold plating.
View detail
![VXSeriesChain 520VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_G&G_P.jpg)
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
It's quiet.
After I changed it, it became much quieter.
The other sounds were so distracting. (possibly Bearing)
It looks Gold and I am satisfied with it.
View detail
![VX Series Chain 520VX3 Stainless Steel [with Caulk (ZJ) Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_Steel_P.jpg)
Fits: KAWASAKI KLX650SR, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI DR200, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XJ6NA, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA SRX400, YAMAHA MT-25, YAMAHA MT-03, HONDA FTR250, HONDA CRM125, SUZUKI RG250E, SUZUKI RG200 γ, SUZUKI MARAUDER250, SUZUKI INTRUDER250LC
Highly Recommended for Original Motorcycle Parts!
I’m very impressed! They offer a great selection of original, high-quality motorcycle parts that fit perfectly. The website is easy to navigate, and I had no trouble finding what I needed. Customer service was responsive and helpful with compatibility questions, and shipping was fast. Overall, a reliable and trustworthy site for all your motorcycle part needs! View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Cospar good
Good cosmetic design.
It is a beautiful Gold.
It is light in use.
View detail
![ERSeriesChain 520ERVT Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/63583/520ERVT_G_G_P.jpg)
Fits: HONDA CRF250M, HONDA CRF250R, HONDA CRF450L, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, SUZUKI RM-Z450, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, KAWASAKI KLX230, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX450, HONDA AX-1, HONDA CR125, HONDA CR125
The lightest movement is the best.
I have it on a CRF250L MOTARD, and when I put it on the STAND and turn the rear tire by hand, it really turns lightly.
I have never had a Chain that spins without such resistance.
It's so good that I'm using it a second time.
View detail
![ER Series Chain 520ERT3 Gold (for Motocross Competition)[Clip(RJ)Joint included]](https://img.webike-cdn.net/catalogue/images/63583/520ERT3_G_G_TS.jpg)
Fits: HONDA CRF250M, HONDA CRF250R, HONDA CRF450L, HONDA CRF450R, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450F, SUZUKI RM-Z450, KAWASAKI KLX230, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX450, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125R, HONDA CR250, HONDA CR250, HONDA CR500
High performance and clean
The OEM Chain has grown old and needs to be replaced. I chose this one because I wanted to replace it with a slightly better Chain anyway.
The clip type is easy to remove.
Also, the gold color will make your feet look more fashionable.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Gold color is beautiful,
I bought this because it was time to replace the chain. I chose the gold color for dress-up as well, and it is a great recommendation for those who are thinking of replacing the chain for dress-up as well. View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Changed from Clip to Crimp
The Chain attached to the used vehicle was connected in a Clip type.
According to the service manual, the Clip type should never be used according to the service manual, so I considered replacing the entire Chain, but since it was relatively new and the Chain itself was in good condition, I replaced only the Joint.
The one that was installed was DID's VXSteel, so installation was not a problem.
The color was set to Gold to make it easier to distinguish one round in ChainMaintenance.
Also, since I had never replaced a chain by myself, I thought I could buy a tool and challenge myself, and if I failed, I could replace the whole chain, so I replaced it as a matter of practice.
It was a good experience.
View detail
Fits: GASGAS MC125, GASGAS MC250F, GASGAS MC450F, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC150, HUSQVARNA TC250, HUSQVARNA TC300, HUSQVARNA TE125, HUSQVARNA TE150, HUSQVARNA TE250, HUSQVARNA TE300, HUSQVARNA TX300, KTM 125EXC
Mounted on KTM EXC
The product was good, but the adjustment range was narrower than OEMbrembo's and the Clutch was too far away from the OEM.
Then I thought of replacing the screw with the OEM one, but the OEM screw is larger in diameter and cannot be replaced.
Very Large hands (I'm also a very Large person). If so, I don't think you would mind, but I ended up going back to OEM because it became harder to do when applying the semi-crafters.
Also, the collar that came with the Clutch Side did not fit into the lever and had to be reassembled by the OEM.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Monotone's Motorcycle with goal coloring
I chose VX3 because I thought it was time to replace the chain on my new car due to rust and sticking. I was very satisfied with the color, as it gives a strong presence to the Monotone Motorcycle. At least compared to Steel, the new Chain is smooth and comfortable. Although I did not replace the Sprocket this time, I will consider doing so in the near future. View detail
![VXSeriesChain 520VX3 Silver [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_S&S_P_TS.jpg)
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
As 520Conversion
I purchased this for 520for Conversion.
It has a larger presence than the 428.
I thought about Gold, but personally, Silver was the right choice.
I think the texture is good and the quality is fine. The rattling sound when driving is Large.
View detail
Fits: KAWASAKI KLX300R, KTM 125EXC, KTM 125EXC, KTM 200EXC, KTM 250EXC, KTM 250EXC-F, KTM 300EXC, KTM 350EXC-F, KTM 360EXC, KTM 380EXC, KTM 400EXC, KTM 450EXC-F, KTM 500EXC, KTM 500EXC-F, KTM 520EXC, KTM 530EXC, KTM 530EXC, SUZUKI DR250R, SUZUKI RM85, YAMAHA DT200WR
Well worth the money and better than lifting the bike on the stand after each session
Worked as planned, good quality and as represented. Was looking for an inexpensive triangle stand, I wasn't sure if it would fit for my application. It worked fine and believe it will be a good addition. I bought 2 of them,really good quality for its price. I would recommend if you are in the market for this type of stand. View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
no problem
I was able to install it without any problems.
Thanks to this, the noise was eliminated!
View detail
Fits: HONDA CRF250M, HONDA CRF250R, HONDA CRF450L, HONDA CRF450R, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450F, SUZUKI RM-Z450, KAWASAKI KLX230, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX450, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125R, HONDA CR250, HONDA CR250, HONDA CR500
Inexpensive and reliable.
DIDChain was used by a MotocrossProfessional rider I've known for a long time.
I went to the Motocross place for the first time in decades and changed the STD SizeSprocket from 42T to 50T as well as the Chain to go through the exercise.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Chain exchange for EliminatorV was done.
Buy Crimping tools from Astro.
Chain and Sprocket were exchanged
View detail
Fits: HONDA CRF250M, HONDA CRF250R, HONDA CRF450L, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, SUZUKI RM-Z450, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, KAWASAKI KLX230, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX450, HONDA AX-1, HONDA CR125, HONDA CR125
Shiningly
Seal chain, but I don't mind the friction loss that much.
A SundayRacer like myself can't tell the difference between a seal chain and a non-seal.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Seals are weak.
GSX400 is 525 but 520Conversion.
There is almost no initial elongation, and after 15,000 km, there is no need to adjust the tension. While cleaning the other day, I found one broken seal! The recommended replacement distance by DID is 15,000 to 20,000 km, so I guess it is not abnormal, but it is a little early. I'm sorry to say that it's a little early to replace the DID, but it's a little too early to replace.
View detail