Reviews
Fits: Others Compatible with CF-1WShield, Others KAMUI III, Others SHUMA
It's insanely good.
It's great, I think changing the Shield makes it too dark, but this makes it so much easier to see both day and night. I think I made a good purchase. View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
I am satisfied with the low price.
Used for Z-7.
The dimming is unpopular with other reviewers, but we purchased the [Color] The product is Clear, so there were no problems whatsoever, and the feel was comparable to the OEM.
The price is also lower than SHOEI's, so this is the recommendation for those who change frequently.
I'm going to Repeat it again.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
Transparency is low.
I purchased ARAI's OEM Clear Shield in the hope that it would be a dimming shield, but in a nighttime room with almost zero UV light, the transparency is quite low, and although it is hard to convey in the photo, it seems to be slightly cloudy and cloud-like. I removed the protective seat. I didn't test the dimming in winter outdoors, but I don't think I should expect too much. I will make a comprehensive judgment after actually driving the car. View detail
Effective
Anti-fog effect is perfect.
I used it inside a Clear base Mirror shield and it was perfect for nighttime visibility. It also looks great as a brown.
It takes a hang to install it, so I was forced to install it and the edge chipped off...
Next time. [Color] I would also purchase Smoke and Polarized
View detail
Mitsuba sankowa Anti-fog film for ULOOK VAS-Z
Item received.as in picture,packing was excellent.shipment arrived on time.my 5th purchase so far.no issue.product as advertised.install and vision a bit blur,not sure if it's supposed to be that way or the product is not well store or old stock.can refer to the picture,the bottom is the pinlock install and the upper is the visor. View detail
Not bad, but ….
I put it on SHOEI's GramStar.
I was going to replace it with Mirror shield, but when something that looked white was released, I bought it.
It is a Pin lock modoki, but it is a mysterious product with color.
As you can see in the image, it does indeed add color, and the view you see is a Yellow color.
At first I wasn't sure about this, but once I got used to it, it was easy to see at night.
It was unfortunate that it was more transparent from the outside than I had expected.
Also, the installation was moderately Large strange. I found an official video of the installation, but I could not imitate it because it seemed that they put so much effort on the Level. I could not imitate it.
Large was strange depending on the direction of warping, but I managed it.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
uncomfortable feeling
Anti-fog Film for ULOOK VAS-V Item No. : UL-01T01
Color; Dimmable For ASTRO-GX
OEM Pin Lock Seat (MVPin lock120) is not a problem. I was told that dimming is determined by the amount of UV light, but it is winter so I could not check.
View detail
Fits: Others X-Fifteen, Others Z-8
Dimming Type
Enough dimming to be easy on the eyes
I think it is better than the expensive Shield dimming Type.
View detail
Fits: Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Anti fog screen for Arai Rapide Neo
About quality and texture Smooth plastic well made, flexible but very durable. About the feeling of use During rainy days it will definitely not fog up. It works very well and serves it's purpose. I got the tinned color and it helps to block out the UV ray and the sunshine too. But once riding in the tunnel, there maybe a "double vision" on lighted vehicles. But will get used to it after familiar with it. About Design. Well made easy to install without any trouble. Cost performance and comparison with other products Not sure about other products as this is only my first time using a antifog visor. But I'm very satisfied with the price and the product. About shipping and packaging Small and light product. Well package with very professional packaging. Any concerns, cautions, or advice when purchasing Able to remove and wash it with any problem too. So able to purchase and use the product with ease. View detail
Fits: Others RAPIDE-NEO, Others ASTRO-GX, Others ASTRAL-X, Others RX-7X, Others VECTOR-X, Others XD
Circuit use!!
[How is it used?
I bought this product because my RX-7X I am using for Circuit use is fogging up and I wanted to put a pin lock on it.
Was the one you received as per Image?
I used it at the Fuji Speed wayShortCourse in early December and it did not fog up at all.
How was your experience with it?
I am wondering if I should buy more because the gold amount is reasonable and there is a wide variety of colors, etc.
[Points to note]
How did it compare to other products?
I have only used this one, but it was easy to put on and take off.
View detail
Helmet is cheap, but...
[How is it used?
Purchased to install on YX-6 ZENITH Shield purchased to use for mountain play. lack of Sense and no improvement in driving skills. The Eternal Beginner. I am a "I" who breathes hard when I attack a difficult area, and my shield fogged up and my visibility was zero when I used an adventure helmet.
However, if you use GogglesSpec., you will have to take off and put on the helmet frequently in a sweaty condition, and it is very troublesome to take off and put on the Goggles.
In order to meet my selfish needs, Pin Lock Seat was introduced.
How did you like it?
It doesn't fog up at all." It is not that the visibility is completely different with and without this product, especially in winter. I can't do without it." It is a product that I can't let go of as much as I would like to.
At a time when this type of product was not on the market. Anti-fog Spray. Ya The "stone? water (which was said to have an anti-fogging effect)." etc., on the motorcycle while frequently applying them to the Shield.
How did it compare to other products?
In case you're interested, it's exclusive to ZENITH's YX-6. (This is a sister product to HJC's HJH133 DS-X1, so it can also be used here.) So, when it comes to other products. UniversalPin Lock Seat This is the case
The anti-fogging effect will be the same, but the dedicated product is easier to position since it is attached along the Shield's claw, and the price is almost the same.
[Points to note]
When installing, slightly distort the Seat to the opposite side to align it with the Shield's claw, but do not use too much force as this may result in a crease, or if you work with dirty hands, you may install the Pin Lock Seat with dirt on the inside. So, please work without hesitation wearing rubber gloves or using beautiful hands.
The claw on the Shield side is surprisingly fragile and can easily break if you try to install it by force... (I have experienced this with other helmets... I cry) Work gently and carefully.
Read the Instruction Manual carefully and be careful not to use Chemicaletc. that should not be attached to the Pin Lock Seat.
【Included Parts:presence or absence】.
Pin Lock SeatBody and Instruction Manual are included.
[ITEMS TO BUY TOGETHER
None in particular, but once installed I wanted to replace it with a Mirror Shield or Smoke Shield (along with a Pin Lock Seat)." If this is the case, it will be a double hassle, so it is better to purchase and install the Shield together with the Shield you want to use during normal operation to save time.
Opinions and requests to Manufacturer.
For Helmet of the same Manufacturer Universalization to some extent." The helmet itself is more reasonable than those made by ARAI and SHOEI, but the Pin Lock Seat is about the same price, which seems somewhat overpriced.
[Points to note]
When installing, slightly distort the Seat to the opposite side to align it with the Shield's claw, but do not use too much force as this may result in a crease, or if you work with dirty hands, you may install the Pin Lock Seat with dirt on the inside. So, please work without hesitation wearing rubber gloves or using beautiful hands.
The claw on the Shield side is surprisingly fragile and can easily break if you try to install it by force... (I have experienced this with other helmets... I cry) Work gently and carefully.
Read the Instruction Manual carefully and be careful not to use Chemicaletc. that should not be attached to the Pin Lock Seat.
【Included Parts:presence or absence】.
Pin Lock SeatBody and Instruction Manual are included.
[ITEMS TO BUY TOGETHER
None in particular, but once installed I wanted to replace it with a Mirror Shield or Smoke Shield (along with a Pin Lock Seat)." If this is the case, it will be a double hassle, so it is better to purchase and install the Shield together with the Shield you want to use during normal operation to save time.
Opinions and requests to Manufacturer.
For Helmet of the same Manufacturer Universalization to some extent." The helmet itself is more reasonable than those made by ARAI and SHOEI, but the Pin Lock Seat is about the same price, which seems somewhat overpriced.
View detail
This is the best
Used for AraiTour cross
ManufacturerOEM Parts interfere when opening and closing, even though they are exclusive parts.
This product is totally stress-free. And it's easy to reupholster.
Although often neglected because of WINS, FOGWIN is above other manufacturers.
I think it is PARTS.
There is a slight chemical smell, but it disappears after a week or so.
I chose Standard because it is AdventureStyle's Shield.
If you can put up one for Adventure, I'd like to try that one too.
Quantity:Pair (for Left and Right) If that bothers you, you can see the edge of the Seat on the underside of the
It wouldn't have been suitable for driving on public roads in the first place.
View detail
Fits: その他 GT-air II, その他 Z-8, その他 NEOTEC II, その他 J-FORCE IV, その他 J-Cruise II, その他 VZ-RAM, その他 CT-Z, その他 SZ-G, その他 F-17, その他 AERO BLADE V, その他 KAMUl-III, その他 SHUMA, その他 RYUKI, その他 EXCEED, その他 AVAND II, その他 A-FORCE RS, その他 G-FORCE SS, その他 FF-COMFORT, その他 A-FORCE RS JET, その他 G-FORCE SS JET
Once you use it, you can't stop.
When I purchased the Helmet from WINS, the one I got as a bonus was ruined, so I peeled it off.
It was so badly fogged up that I realized how much this product had helped me.
The transparency is high and there is no change at all in visibility even when the lens is worn.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
I don't feel the effect of polarization.
I wanted the polarization feature and also to make Clear shield a little darker because the Inner Visor of GT-AIRII is not dark enough.
It is said to be polarized, but I do not feel the effect.
The fake polarized Sunglasses sold on Amazon for about 2,000 yen are more effective in polarization.
Sunglassesetc. polarized light is used to reduce the reflection of light from the front glass of passing cars,
I had the impression that I could see Driver's face, and the trees and the sky's Blue were darker, but these are not there at all.
I guess it was the light, but sometimes it was difficult to distinguish between wet and dry road surface conditions.
Also, the features say that it reduces glare on the road surface, but to us, it seems to make it glare more.
Most of all, what bothers me the most is that the color appears to change at a dizzying rate/severe to adhere to compared to OEM.
This is disappointing because I had excessive expectations for polarization.
View detail
Fits: その他 GT-air II, その他 Z-8, その他 NEOTEC II, その他 J-FORCE IV, その他 J-Cruise II, その他 VZ-RAM, その他 CT-Z, その他 SZ-G, その他 F-17, その他 AERO BLADE V, その他 KAMUl-III, その他 SHUMA, その他 RYUKI, その他 EXCEED, その他 AVAND II, その他 A-FORCE RS, その他 G-FORCE SS, その他 FF-COMFORT, その他 A-FORCE RS JET, その他 G-FORCE SS JET
The sticking range is also good and wide.
It is considered an excellent object, although it is not completely in the rain and not during the cloudy winter months. The price, too, is not bad. View detail
Fits: Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Visibility is stabilized. But it may not be amazingly effective….
This is for products in the color Pink.
The Helmet is RX-7X and the Shield is Yamashiro's EXTRA SHIELD Mirror Red, and while I have no complaints about the Shield, as you can see in the attached photo, the Semi-smoke just makes it a little darker, so the vision is not always clear.
So I tried this product and it makes me see a little brighter; the moment I lower the Shield, my vision is slightly pink, but I am not aware of it immediately. Also, even when stacked with Semi-smoke, it does not seem to darken, and the effect is clearly visible, so I guess the darkness is Plus minus 0.
However, I would say that it is not as good as it could have been, if I may say that it has become dramatically more visible.
View detail
Fits: Others VECTOR-X, Others XD, Others RAPIDE-NEO, Others ASTRO-GX, Others ASTRAL-X, Others RX-7X
These products are welcome.
[How is it used?
Street riding:Closed 8:2
Was the one you received as per Image?
The color was a little different, but no problem.
How was your experience with it?
I think it has good visibility and moderate UV rays CUT.
[Points to note]
There are a variety of Manufacturer and Helmet Spec. so be sure to apply them when purchasing!
How did it compare to other products?
We have colors and Spec. that are not available in OEM.
Point and hang of installation
If you know how to remove and install the Pin Lock Shield properly, there is no problem.
[Opinions and requests to Manufacturer
It would be nice to be able to Appeal more of the goodness of these products.
I think it is easy to use for touring and running meetings.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
Daytime use.
Mainly daytime, city driving.
Installation was as easy as OEM.
OEM Mirror shield for SHOEI GT-AirII to OEM installation of this product [Color] My impression after replacing it with Clear,
The light shielding rate is lower than the OEMMirror shield, but it was moderate during the day.
Not used at night yet, but maybe a little.
I had some concerns about the non-OEM part, but overall it was fine.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
Dimmable Pin Lock Seat
The color change is much lighter than I expected.
Is there a hit ha Gap? I am sorry to say that there is a Stain-like cloudiness all over and I can't wipe it off.
I understand that it is an Other Brand Product, but it would be nice to change to a darker color.
It is better than NORMALClear with dimming.
View detail
The anti-fogging effect is great!
When installing, static electricity? Dust is called for, so be careful in the working environment!
Visually, there is a space between the Shield and the Seat, so the transparency is not as good as it was before the Shield was installed, and I feel a slight distortion.
However, I am Large satisfied with the performance of the product. It is really nice and safe to not fog up, and I would definitely recommend wearing them, rather than opening the Shield a bit and feeling cold. I am a Glasses user.
View detail