Reviews
In OEMHelmet holder
I have not been able to install it yet because the weather has been rainy on my vacation since I purchased it, but as far as I have checked Reviewetc., I think it is a highly satisfactory product.
Since the OEMHolder cannot reach the Helmet's Holder...
View detail
Not a bad product.
A little difficult to handle due to its low position. View detail
Convenient to have
It is easy to install and looks like an OEM product after installation.
The Helmet is hidden on the Left Side, so it is good that the Helmet is not visible when taking pictures of the Motorcycle from the Right Side.
View detail
![[Helmet Holder Replacement Parts] Holder Body](https://img.webike-cdn.net/catalogue/images/41401/1_145759949779129800_m_6pk2b_TS.jpg)
Large Helmet holder with hooks
The helmet holder on the OEM motorcycle is small and difficult to use, so we purchased it.
The ENDURANCE:Endurance MultiCenterCarrier shown in the photo was installed because there was a place where it could be mounted.
The large hooks make it easy to attach a helmet.
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
KITACO Helmet Holder
Installation was quick and easy. Before releasing the bolt, you must remember the original position to hold it in its original position. I bought a high-quality product, so if someone asks, I will highly recommend it. View detail
Keep the Style
If you keep the Tandem Footpeg attached, I think KIJIMA is better, including ease of use.
But if you want to make it a complete one-seater, I wouldn't hesitate to go with Babyface!
It's not easy to use, but you can't change the way it looks!
I am Large satisfied with my choice!
View detail
When attached to Left, ….
I like the look of the Large change.
The feel is that the Dial is small, hard, and difficult to turn.
Also, you can steal it if you remove the Bolt, although you can't put it on right away.
My Motorcycle has a Multi Bar on the Right, so I put it on the Left.
Installation is easy, but I was concerned that the root of the Wire interferes with the Switch box depending on the direction in which the Wire is wound, and that since the Wire is wound opposite to the deFault, the deFault's winding habits are irritating.
Also, in the case of Cowl mount Mirror, the Helmet cannot be hung on Mirror because it is naturally separated from Mirror when the Handlebar Lock is applied. Please be careful if you are going to install it in the future.
I hope it works with the 30 cm long extension Wire I have on hand (it's about 10 cm when looped), but I haven't tried it.
View detail
Helmet lock can now be done easily
The Helmet lock of the CT110 HUNTER CUB is very cumbersome to take out the attached Wire from the Tool Box and put it through the Helmet lock Bracket under the Seat. It is also a stress to scratch the area around the lock bracket with the wire.
So when I was looking for a good helmet lock tool, I saw this product introduced in an article on Web!ke, and it looked pretty good, so I bought it immediately.
Installation is simple. Loosen the Oil Master Cylinder fixing bolt on the front brake, connect it to the Master Cylinder with the supplied collar and bolt, and fix it to the handlebar. The wire is then connected to the other side of the handlebar. (Front side of the vehicle) Through it, it will not get in the way when driving.
To lock the Helmet, simply place the Helmet on the CenterBasket and lock the Wire through the Chin guard. In addition, the Smartphone Holder is attached to the Adjustable Mount bar of ZETA by the Left Side (Clutch Side) But when I cut the Handlebar to Left and lock the Handlebar, the Smartphone Holder interfered with the Helmet and I couldn't put it on the CenterBasket properly, so I put the Smartphone Holder on the Right Side. (Brake Side) The Smartphone Holder is now mounted on the Clutch Side. By the way, many people have Smartphone Holders mounted on the Clutch Side. (Because it is often operated with the Left hand?) However, we do not feel much inconvenience even with the Right Side, and the charging cable is sufficiently reachable from the USB power supply that is offset on the Left Side.
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Convenient
It is useful for Tandem or when you have a lot of luggage. View detail
Fits: KAWASAKI Ninja 250, KAWASAKI Ninja 400 (2014-)
Necessities
The OEM helmet holder position on the ninja is not good enough for the helmet to hit the footpeg, so I installed this. It is very easy to use and I wonder why it was not in this position from the beginning. When you remove the helmet lock, you have to remove the t30 screw, but be careful not to lick it, because the screw lock is painted and very hard. View detail
Fits: KAWASAKI Ninja 250, KAWASAKI Ninja 400 (2014-)
Necessities
The OEM helmet holder position on the ninja OEM would not allow the helmet to hit the footpeg, so I added this. It is very easy to use and I wonder why I didn't put it in this position from the beginning. The t30Screw is coated with a screw loosener when removing the helmet lock, so be careful not to lick the screw. View detail
Fits: BMW R1200R, BMW R1200RS, BMW R1250R, BMW R1250RS, BMW S1000RR
It's perfect
We had a Dealer install it on a BMW R1250R in 2023!
The labor cost was 1,650 yen.
Very useful.
View detail
Absolutely necessary!
It is a must-have product because Eliminator's OEM Product is not easy to use.
It is easy to install and very user-friendly.
View detail
Fits: SUZUKI GIXXERSF250, SUZUKI GIXXER250, SUZUKI GIXXER150
That would be handy
The DL1000 V-STROM250SX is mounted on the same frame as the Gixxer 250, so no special modifications were required.
Wrap the Rubber around the Bracket and insert it into the Bracket.
*Because it is only clipped by Bracket, it is better not to run with Helmet hanging down, because there is a risk of it coming off.
I don't think I'll be using it much since I have a top case, but I think it will come in handy when I have a full load of souvenirs, etc.
View detail
It is easy to install.。
You only need one Hexagonal Wrench to install it, just apply Screw lock and tighten it. I always buy helmet locks from this manufacturer because they are inexpensive and the quality is very good. View detail
I would also like to see the foundation for Right Side *.
The screws holes for the SIDE vernier mounting bracket on the GSX-8R Tandem Footpeg Reverse side are used for SMART mounting.
As others have mistakenly said, Install the foundation with the smooth side on the outside (the one with the loci on the inside)." The first one with Logo is installed on the outside, and the second one with Logo is installed on the inside. Holder upside down?" I panicked.
View detail
Very convenient!
First of all, this product is per Large! It's a Dial type so you don't need a key! I didn't realize how convenient it would be to just use it…The texture of the switch when you press it is also great! The weight is reasonable and the build quality is good! Once you use it, you will never go back to the OEM Helmet lock which is hard to use! I will never go back to the OEM hard to use Helmet locks once I have used them! View detail
Postscript to postscript!
You probably think that a helmet is something that someone else is using in direct contact with your skin, and that there is no reason for someone to steal such a thing. The idea of a thief is that he/she wants a helmet for a Tandem person. So don't think that because the helmet is large, it is durable or that the probability of it being stolen is low. View detail
Postscript.
In my opinion, the screws of this Helmet lock are Large, which is an oddly soft material. In my opinion, the screws that fasten the Helmet lock are Large and are made of an oddly soft material! Therefore, it is safer to work with caution and take it easy or Shop.
Helmet locks themselves may be inexpensive, but helmets are expensive, and if they are stolen, you will not be able to get back on your motorcycle.
View detail
I was relieved that it was as good as I imagined.
The vehicle used is z900RS.
Due to the convenience of installing the Side Back on the opposite side of the Exhaust System. The existing helmet holder could not be used.
Then, I thought of for Tandem, Helmet holder.
It can be installed on the opposite side of the existing helmet holder.
This product has arrived. It looks the same in appearance as the existing OEM product.
I wondered if the existing helmet holder could be attached to the bracket as it is, and it did so without any discomfort.
In other words, the Helmet holder that can be used with the Engine key arrived on the opposite side of the existing one.
View detail