Reviews
Buy Full face because of the cold weather
Was the one you received as per Image?
Street Image
[How did you feel about the Fit?
a little tight in the cheeks
How was your experience with it?
Lighter than it looks and less neck fatigue
What are the specifications of the product?
[Was there anything that disappointed you?
The drawback is that the chinstrap is not one-touch.
How did it compare to other products?
I wanted a Simple Helmet and chose this one.
I usually use a Jet helmet, but it has a roomy mouth for a full face, which reduces the tightness.
View detail
M-930 Helmet
About the feeling of use Very confirtable Cost performance and comparison with other products Fair for the money About shipping and packaging fast shipping no way to dammage View detail
Fit feeling is good for a foreign-made Helmet.
Many foreign-made helmets, even AsianFit, are narrow for Westerners, and when worn, there is often a feeling of pressure from the SIDE and an impact on the ear area when putting on and taking off.
I feel a little pressure around Teak, but I don't mind it because I expect it will wear out after use.
However, the cap appears to be slightly larger in size, so from a third-party viewpoint, the silhouette is a bit too big for the head.
The paint job and interior texture are good, and the design resembles Armour's Helmet, which appears in the famous game "H◯LO.
The PeakVisor is even more similar, but this Visor is difficult to use. It may be a matter of getting used to it, but when I tried to close the open Shield, I accidentally picked up the Visor and couldn't close it. "What? It won't close!" This can be the case.
Shield also seems to be slightly distorted in the forward direction.
In addition, the Knob for opening and closing the Shield is located directly in front of the Shield and is small, making it difficult to pick up and operate depending on the Gloves.
Weight-wise, it is hard to judge since it is the first full-face, but looking at the Specifications, I think it is slightly heavier.
Considering the price and other factors, I think this is a well-made product overall.
View detail
One-Shoulder Helmet
The cap is thin, the chin is high, and extremely beautiful.
The inside is wide for being narrow, and the L is about the same size as a GramStar XL, and it is extremely lightweight.
While many of the helmet styles have unusually hard hooks to hold the shields, these are loose and not at all stressful to attach and detach, so they can be easily snapped on and off when you do not want them to float, such as when driving at high speeds.
However, the Shield cannot be fixed open and always closes under its own weight, so it must be lifted and held by hand to prevent fogging when waiting for a traffic light in winter.
View detail
Cost performance is the best
I own helmets from various manufacturers, but the LS2 is my top choice.
The size feeling is the same as FOR JAPAN MODELManufacturer. It feels lighter than the published value and there is no burden on the neck.
Inner Shield is also easy to operate and ready to use when the need arises.
Above all, CarbonHelmet is really excellent in cost performance at this price.
The distributor, Seiden, also puts a lot of effort into after-sales follow-up, so there is no need to worry about being an overseas manufacturer.
View detail
Value for money! I am happy to get CarbonHelmet at a reasonable price.
Air ventilation is quite good. It did not cause my hair to steam. The Inner Shield is so close to my face that if I lower it fully, it hits my glasses and cheeks, so I try not to lower it all the way. I am satisfied with the CarbonHelmet because it is inexpensive and looks good for a carbon helmet. It is hard to evaluate the strength of this helmet because I don't want any situation to occur. View detail
Lightness and cosmetics
This is the third Helmet from WINS, and it is quite good in terms of comfort, lightness, and appearance!
I used to use the Mat color of all the MODELS of this one, and the chinstrap is a little shorter than that, but no problem in use!
View detail
GlassesNG
good
The basic construction is solid.
It is smooth to put on and take off, and the head feels held firmly in place.
The chinstrap length is just right and the D Ring is easy to use.
Shield height can be set freely, and raising and lowering is smooth and easy to use.
bad
The ear area is a little tight.
No space for the glasses, making it difficult to wear them smoothly and causing ear pain.
I don't have Sun visor, so it's hard in the evening, especially on long distances.
Vent hole at the mouth was broken (no problem, so I continued to use it).
It is good for those who do not use Glasses and want an inexpensive, solid full face for short distances.
View detail
Terribly light.
【good point】
It is terribly light.
M Size cap weighs 1,380g (±50g) but you can use the Inner Visor as a
The lightness of this product is amazing even though it is equipped with a
We are no longer satisfied with other Helmets in the same price range.
I am not tired at all.
Combined with the lightness mentioned above, it is almost impossible to wear it for more than half a day.
You will not feel fatigue.
Income is easy to install.
I use B+COM ONE, but also Base plate for Body
The Speaker can be installed without any difficulty and the Speaker is mounted over the mounting recess.
The interior material, Mesh fabric, covers it and makes it comfortable.
It is inexpensive.
Material with Inner Visor:CarbonFull face helmet is
The cost performance of less than 50,000 yen is excellent.
Is there any?
[Lamentations.
Wind Cutting noise is too loud.
Income hearing is hindered at 60 km/h or more.
It lacks a sense of ... Fit.
I tried to get used to using the MSlim because I felt loose in the M Size,
The discomfort is only increasing as if a finger is pressing down on my cheek.
The Sponge in the Cheek pad can be adjusted by removing and cutting the Sponge.
It is said to be for sale, but on the contrary, it is a revenge and Sponge's position and shape cannot be determined.
I feel as if it is.
【Review】
It is a good cosmetic product.
If you like the design, you can't go wrong with it, but you need to choose the right size.
It is better to pay attention.
View detail
So-called Lee Vise or Fender's Replica
The spec. of STAR II for RepairPivot kit has been changed and it is no longer usable at all. (This is the Size XL version of the company's 100R, which is different from the 200R.)
The head is about the same size as GramStar's XL, and the cheek pad is slightly tighter.
When it is lined up with STAR II, the logo of "O-Decoration" (it is a seal, so it is claimed that it can be peeled off) and the overall forme show a lack of confidence, and the chinstrap has a One Touch Buckle and the edge rubber is in a strange position, which are not so nice in accordance with the price. The jaw strap is One Touch Buckle, the edge rubber is in an odd position, and so on.
View detail
I will never buy LS2 again.
Was the one you received as per Image?
I bought it because I fell in love with it at first sight when I saw the picture on the product description Page.
But the product I received was Black, unlike the picture.
I would not have bought it if it was this color.
Manufacturer claims that there is no problem because of the light and individual differences.
Perhaps it would be Silver like the description Page if it were shot using a photographic Light stronger than the direct sunlight of mid-summer noon.
However, this is a motorcycle helmet. Naturally, it is supposed to be used outdoors.
And this looks like Black even in direct sunlight at noon in midsummer, no matter how anyone perceives it. Helmet in Black. Id.
I doubt the good sense of the manufacturer to sell a product with a picture that looks like silver, using excuses such as individual differences and the sensitivity of the light.
For the guests (at least for me). I've been duped." I can only feel that this is the case.
[How did you feel about the Fit?
It is not AsianFit, so the top and back of my head is too much on the side of my head for my typical Asian head.
Moreover, the cushion on the side of the head is thin, and there is a groove carved into the liner in that area, and the protrusion of the groove hurts when it hits.
The narrow frontage makes it hard to put on and take off, and the cheek pad is tight.
On the other hand, if it is covered, Quantity:Pair (for Left and Right) The Fit feeling of the "Fit" is not bad, and the advantage is that the Income speaker is also close to the Plus for quietness and improved sound quality.
How was your experience with it?
Upper Ventilation is useless.
As shown in the attached photo, the head interior is fully covered.
Therefore, the head is completely separated from the wind path from Ventilation by the interior.
This would not allow the head under the interior to feel the wind, even if the wind did pass through.
In addition, if you are a person who fits your head, the Cushion on the top of your head could completely block the passage of the wind.
For now, we'll just drill holes in the cap and the liner." I have to wonder if this is the idea.
Ventilation at the mouth, on the other hand, has a large opening for better airflow.
In addition, while helmets with Inner Visor generally do not have an air inlet from the forehead due to their structure, this product has a structure that allows air to flow from the forehead to the inside of the Inner Visor, which is a notable advantage (although the effect was not felt).
What are the specifications of the product?
The Microphone storage space for Income at the mouth is kindly designed.
[Was there anything that disappointed you?
Interior sewing was shoddy, with some gaping from the center and some forgotten stitches. The interior sewing was shoddy, with some gaping from the center and some forgotten stitches.
The Speaker of Income is covered by a Chin strap.
Income mounting is not well considered, as evidenced by the Inner Visor Slide in a position suitable for Income mounting, and there is no suitable flat surface for taping (inevitable floating edges).
How did it compare to other products?
Motorcycles and wears are popular among overseas manufacturers, but when it comes to helmets, they are treated as third-rate products and not even looked at by many people, which is strange until now.
If this is the case ... Helmet of Foreign Manufacturer is no good." It is only natural that this would be the case. I learned a lot.
View detail
light
ARAIZ-7 is getting tired, so I bought a new one.
The cap is also small and lightweight, which is appreciated by large-headed people.
Wind Cutting sound from the vicinity of the Inner Visor moving lever is loud.
I have another MODEL of the old Inner Visor, but as for the Inner Visor, I think the old one is better because it shielded the light well enough.
New Model is a little uncomfortable because it hits the head of my nose. It will not be bothersome after running for a while.
Not that I have no complaints, but it is a product I would buy again.
View detail
Highly visible
I usually use LEAD's Jet helmetFLX.
I looked around to buy a full face, but I decided to go with LEAD because of its cost performance. The soft interior gives a good fit. I think it is perfect for daily use plus occasional touring.
At 1/3 the price of SHOEIARAI, I have no complaints about this construction.
View detail
Lightness is justice?
I like helmets made by foreign manufacturers and have many of them, but this is one of the best and lightest among them.
Included Parts:is also included in the price.
TeakBat is a little bit tight, but for me, the size feeling is the same as that of domestic Manufacture.
In addition to being lightweight, the Ventilation system makes it less suffocating than other full face helmets, even in summer.
Manufacturer is also putting a lot of effort into SNS, so even those who are worried about overseas manufacturers can rest assured that they are in good hands.
View detail
Cheap, lightweight, good cosmetics
Here are my impressions after having done it a few times since I bought it. We live in a rural area where it is 50 km over a mountain pass to the next town. We are a family and cannot afford to spend a lot of money on motorcycles, so we are looking for a product that is cost effective.
good point
The helmet I originally used was the System helmet from 10 years ago, and I was surprised at how light it was. Although the difference is only around 500 grams, the lightness of the Level helmet makes me wonder if I am wearing a helmet at all.
I don't feel that my head is being carried away even when driving (at 100km/h on the highway). I don't know if it is because of the lightness of the helmet, but it is clearly less fatiguing than the previous Helmet.
I honestly thought the One Touch Buckle on the chin looked difficult to use until I tried it, but when I actually used it, I found it very easy to use, and as the One-touch indicates, it can be easily adjusted to open and close with one hand.
The enclosed anti-fogging Seat works wonderfully and makes fogging a thing of the past.
A bad point
The sound of Wind Cutting while driving (60km/h on public road) is incredibly loud. It sounds like "BYOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO. On the other hand, I think it means that wind is passing through the helmet that much.
The interior pad is obviously cheap. The pad on the chinstrap is especially cheap. The other parts don't bother me once I put it on, but the pad on the chinstrap is thin and the buckle on the chinstrap sometimes hits my face if I tighten it too much.
General review
We have never used a famous manufacturer's high-end helmet like ARAI or SHOEIetc., so we cannot compare them, but we felt that this is probably the best cosmetic product in this price range.
ARAI and SHOEIetc. were only tried on in stores, but I did not feel any particular difference just from the feeling of trying them on, but rather felt this one was better due to the lightness of this product. However, I cannot deny the feeling of cheapness when I hold it in my hand.
There is a higher grade model in full carbon with a higher price, but there is a 100g difference in body weight, and I tried on both full carbon and this product in a store, and it is true that full carbon felt lighter to wear, but dry carbon (this product) is more cost effective. I felt that Dry carbon (this product) is more cost effective.
If you can choose a high-cost, high-performance product because it is a safety equipment, it would be better, but for people like us who have to enjoy the hobby on a small budget, we think this is a very nice product.
View detail
First Carbon
I thought it would take a long time to arrive because of Helmet overseas. I received the helmet in 4 days, so I gave it 4 stars. I am very happy with the quality and the price.
When it comes to design, I would give more than 5 stars.
I'll give it a modest 4 stars after using it for an extended period of time.
(Addendum) As for the design, I think it is a product that I can really recommend to others Parenthesis well.
View detail
Quality over price.
I couldn't afford EX-ZERO, so I bought this one … I am Large satisfied with the result. I don't think I have any complaints at this price.
Good points
1 Interior can be detached. Washable! This is a huge Point.
2 SHOEI EX-ZERO Visor can be installed.
3 Income will be attached! It won't hurt your ears either.
Bad Points.
1 I think it is a little heavy.
2 Coating was somewhat uneven. (I thought there were individual differences.)
3 Shells are slightly larger than the trucks, and the Dam trucks are slimmer than the trucks.
I bought this one because Dam trucks did not have a removable interior, and I was personally satisfied with Large. I thought I would keep the interior Stock as well.
View detail
Good looking and lightweight
Buy L Size, AGV K-6 (M Size) Now being used in conjunction with
Compared to the K-6, the K-6 looks larger, but feels lighter in the hand.
The cover is relatively shallow with a wide frontage, and the Visor has a wide field of vision both vertically and horizontally.
The interior is generally hard, and the cheek area is narrow and hits the cheekbone, but not uncomfortably so.
The sound of Wind Cutting is quite loud and a bit noisy.
Intake is at the mouth, forehead, and overhead with good wind penetration.
*The mouth has a Filter, which can be removed, although I have not tried.
No performance problems, but the paint finish is a little poor. (Buffing hanging abrasions? Many scratches) So, that is the area of concern.
If you like carbon, lightweight, good-looking, and not to be confused with others at this point, this may be an option for you.
View detail
Affordable full face
I wanted a cheap Full face for commuting.
I love the Retro design.
The details are cheap.
Well, it's actually cheap, so I have no complaints. However, if you have a shaky chin, be careful!
Size or shape, … My jaw is shaky and slightly touches the cap. I am not comfortable!
View detail
My first Carbon
I wanted CarbonHelmet and bought it.
It's light; this weight with Inner Shield is great.
I have used XL in the domestic helmets I have used so far. This helmet is a type that can be worn without expanding the exterior. It is an Image that supports the head and face entirely with the interior.
Air Intake is also not a problem.
I use it on my ZX12R and SEROW225 and I don't mind the Wind Cutting noise.
Inner Shield is useful. When raised at night, it is very easy to see the road surface. There is no pressure when it is lowered.
The Cover portion of the Chin strap is a bit cheap.
The Chin strap is a push type that inserts the notch, but when removing it, the red belt-like strap can be pulled down from the top to unlock it and move the notch.
I used to use a certain manufacturer's regular push type Chin strap helmet. When I moved my neck to a large size when checking the rear of the vehicle, the chin strap touched the collar of my Wear and the lock came off. Since then, I personally prefer the D-ring type, but I think this method prevents the strap from being pushed by some accident and coming off.
Overall, the Helmet is easy to use and lightweight.
Helmet is said to be replaced in 3 years. This quality at this price is very helpful.
View detail