Reviews
![ULOOK Blaze Mirror] Anti-fog film for CF-1W Helmet](https://img.webike-cdn.net/catalogue/images/133234/4color_TS.jpg)
Fits: Others Compatible with CF-1WShield, Others KAMUI III, Others SHUMA
It's insanely good.
It's great, I think changing the Shield makes it too dark, but this makes it so much easier to see both day and night. I think I made a good purchase. View detail
![SF-7II ZENITH Lea Winds [Zenith Lea Winds].](https://img.webike-cdn.net/catalogue/images/110508/907913258F00_TS.jpg)
Using Zenith:・・・・
Was the one you received as per Image?
It was exactly as shown in the Image and was well made.
I am not a cheap or bad person.
[How did you feel about the Fit?
I chose SizeFree, but it's not too large.
It can be used normally, it's just that it's only for city driving, PetitTwo should be considered as the way forward.
How was your experience with it?
The feel is good, it is light and the basic performance is TIGHTLY.
What are the specifications of the product?
Smoke Shield (sold separately) is used.
There are no other special functions, and it is Simple.
[Was there anything that disappointed you?
Nothing in particular. Frankly, I feel better because I had no expectations at all.
How did it compare to other products?
No comparison.
It was purchased for 125?, so it was a cosmetic choice.
Since my Motorcycle is a Yamaha, I inevitably chose a Yamaha product.
I think the performance is sufficient for my needs, although the Fit feeling etc. is not bad,
Overall, it is loose, so it is not suitable for long distances. It is considered to be only for short distances.
I think it is necessary and sufficient.
View detail
It is a rare and rare big size half cap!
My head is Large size so I have a Big size Just a quick Scooter ride to Convenience. I was looking for a helmet for my son and purchased this one. The chinstrap is easy to put on and take off with the one-touch system. "Spit This is the perfect helmet for those who are looking for a half cap in a large size! View detail
Yellow color….
I bought it because I wanted to use Bubble shield from that era for a long time!
Nostalgic!
But I wonder if the spit is Design-like….
but this does a good job!
It was wonderful to be spared the sun and gain distance to Shield!
The reflection and distortion of the view is minimal for a Bubble, and the moving parts have a firm Click feel. It will be easy to use once you get used to it!
Only the color is shihai!
Daytime, Color:Yellow is dazzling!
View detail
Generally looks good, but a little distressed.
Fitting is perfect. It installs without any problems and looks kind of beautiful.
Blackness is equivalent to Semi-smoke, not Light smoke by ARAIHelmet standards. The face is almost invisible from the outside. It is good during the daytime and visibility is good. [Color] Clear and calm driving.
However, in the tunnel or after sunset, although it is not dangerously invisible like ARAI's Dark Smoke, it is often difficult to see, and one unconsciously raises the Shield.
View detail
Inner Visor. [Color] Can be changed to Clear.
I would like to share with you my impressions on the day I received the Helmet,
Size is currently using two SHOEI Z-7s and an XR-1100. The Z-7 is still in good condition with no interior wear and tear, while the XR-1100 is 12 years old and the interior is thinning like seasoned seaweed.
The size of this product is M and Z-7 is also M Size, but Z-7 is more Tight (cheeks).
The lightness felt like there was no difference in the experience. It is a little strange.
I chose this product because of its price, design and [Color] The Inner Visor of Clear can be used. (Mirror shield and [Color] (ClearInner Visor was also ordered at the same time.) I've been wondering what helmet to get next for about 3 years, and this has been an option for quite some time, but recently [Color] I felt like I knew I could use Clear's Inner Visor and decided to go with it.
The only thing that bothered me was that there was a stain on the synthetic leather on the underside of the Cheek pad. The Cheek pad is not visible once it is covered, so there is no problem, The Visor is also OK because I don't use it often and I don't feel like I can tell when I test drive it. I am satisfied with Large because I got a good product at a low price. I can finally retire my XR-1100.
View detail
![[Helmet Optional Parts] Pin Lock Shield S-15](https://img.webike-cdn.net/catalogue/images/79595/S-15_pin_lock_shield_mirror_sil_TS.jpg)
Affordable price
Visibility was good, not too dark and not too light. View detail
Clear type not seen in other companies
When touring in a tunnel, when you can't get home before sunset, or when it's hard to see the Shield because of the rain. [Color] I think ClearInner Visor is quite good, and I think Manufacturer should promote this point more. View detail
In OEMHelmet holder
I have not been able to install it yet because the weather has been rainy on my vacation since I purchased it, but as far as I have checked Reviewetc., I think it is a highly satisfactory product.
Since the OEMHolder cannot reach the Helmet's Holder...
View detail
Not a bad product.
A little difficult to handle due to its low position. View detail
I purchased Repeat
It is installed in the garage as a Helmet Hanger.
It can be easily installed with two wood screws and is strong enough.
It would be difficult to hang anything heavier than the Helmet, but something around 2 kg would be fine. I use Tape to cure my HangerBody and hang my bicycle Wheel on it, and it is just the right amount.
It is very useful for me, because it is important to make the best use of space when I have a lot of things to do.
View detail
Convenient to have
It is easy to install and looks like an OEM product after installation.
The Helmet is hidden on the Left Side, so it is good that the Helmet is not visible when taking pictures of the Motorcycle from the Right Side.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
I am satisfied with the low price.
Used for Z-7.
The dimming is unpopular with other reviewers, but we purchased the [Color] The product is Clear, so there were no problems whatsoever, and the feel was comparable to the OEM.
The price is also lower than SHOEI's, so this is the recommendation for those who change frequently.
I'm going to Repeat it again.
View detail
Cool
Used to replace a scratched and tired Z-7.
Mellow [Color] I purchased SmokeSilver.
Although the face is slightly visible from the outside, [Color] It looks better and cooler than Clear.
The visibility is Mirror, but it is not that difficult to see, and you want to be able to see well at night! It is a recommendation for those who want to have good visibility even when driving at night.
Mellow [Color] It's Mirror with Smoke, so it's quirky. [Color] Note that it is inferior to Clear,,
View detail
To prevent the Helmet from shifting.
With my previous Helmet, I had a headache due to Gap while Riding for long periods of time, but the Adjustment Sponge has eliminated this problem.
This product is also comfortable on hot days because Sponge absorbs sweat.
The helmet fits snugly and is comfortable to wear, allowing you to concentrate on your riding, which is doubly safe and secure.
View detail
![[Helmet Holder Replacement Parts] Holder Body](https://img.webike-cdn.net/catalogue/images/41401/1_145759949779129800_m_6pk2b_TS.jpg)
Large Helmet holder with hooks
The helmet holder on the OEM motorcycle is small and difficult to use, so we purchased it.
The ENDURANCE:Endurance MultiCenterCarrier shown in the photo was installed because there was a place where it could be mounted.
The large hooks make it easy to attach a helmet.
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
KITACO Helmet Holder
Installation was quick and easy. Before releasing the bolt, you must remember the original position to hold it in its original position. I bought a high-quality product, so if someone asks, I will highly recommend it. View detail
Keep the Style
If you keep the Tandem Footpeg attached, I think KIJIMA is better, including ease of use.
But if you want to make it a complete one-seater, I wouldn't hesitate to go with Babyface!
It's not easy to use, but you can't change the way it looks!
I am Large satisfied with my choice!
View detail
It was carefully packaged and delivered to SPIDI!
I ordered it as soon as I found it because it is not easy to find. One thing to note is that it is Snap onType, not Bolt On. The Screen that can be attached to this Converter is limited to SnapType. View detail
When attached to Left, ….
I like the look of the Large change.
The feel is that the Dial is small, hard, and difficult to turn.
Also, you can steal it if you remove the Bolt, although you can't put it on right away.
My Motorcycle has a Multi Bar on the Right, so I put it on the Left.
Installation is easy, but I was concerned that the root of the Wire interferes with the Switch box depending on the direction in which the Wire is wound, and that since the Wire is wound opposite to the deFault, the deFault's winding habits are irritating.
Also, in the case of Cowl mount Mirror, the Helmet cannot be hung on Mirror because it is naturally separated from Mirror when the Handlebar Lock is applied. Please be careful if you are going to install it in the future.
I hope it works with the 30 cm long extension Wire I have on hand (it's about 10 cm when looped), but I haven't tried it.
View detail