
Reviews

Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)

One-keying is Recommendation
Why didn't it come with it in the first place?
Parts that are so convenient to have that you think
Standard one-keyed
View detail

Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)

I should have added the OEMOption..
I forgot to put it on with Option when I purchased the 2017 MODEL Z1000, so I bought it Installation is quite simple, just remove the two Bolts from the Tandem Footpeg and you're ready to go I was thinking of machining the key cylinder so that it can be opened and closed with the OEM key But I gave up because of the key shape It's a pain to not be able to open and close with one key, but it's a good thing because it's cheap and has a holder View detail

Like an OEM
Installed on a 2016 Z1000
It takes less than 10 minutes to install
If the Nut on the Silencer side is not loosened a little, it will not fit Exactly
It's as if it's been there since the beginning
View detail

Works as intended for my 2010 Z1000
It works as advertised, easy to install. Lock is decent quality. For some big helmets you may hit the exhaust pipe, but for most helmets, it should work as intended. Highly recommended for those who need a helmet lock on their Z1000 View detail

Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)

Z1000 attached to type B
Because I did not have it for B type, I thought that I would buy Bracket by buying it with Rock Single Item, but I bought the current use under no good condition.
I was hoping for a little pounding, but unfortunately the bracket's hole spacing was different.
I was thinking to reopen the hole for a wide part, but because it was narrow, I used the hole on the lock side as it is, and attached the other side with Tandem Footpeg and Frame as it seemed uncomfortable to the appearance.
At the same time I also tried to make it a one-key.
View detail

Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)

very good
Installation is easy and good feeling.
It's OK even if it says strongly, so I think that it should be possible to use it with Main key.
After that it is even better if the price goes cheaper.
View detail

Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)

There was something more convenient for you
There is no Helmet lock in the Z1000, it was fixed with Wire but it became troublesome purchase.
Installation is easy.
The lock part is crappy, but I think that it can not be helped if I think about the price.
View detail

Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)

The helmet lock fits perfectly and installation is a breeze. It works as intended but it is not an easy one-hand operation to remove helmet from the lock as the lock hook dangles freely when unlocked. The lock mechanism can be removed to get it re-k
The helmet lock fits perfectly and installation is a breeze. It works as intended but it is not an easy one-hand operation to remove helmet from the lock as the lock hook dangles freely when unlocked. The lock mechanism can be removed to get it re-keyed to your motorcycle key so you don't need to carry an extra around. Build quality is excellent but there is still room for improvement. View detail

Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)

Short distance to Exhaust System
I use GT - AIR for Helmet,
When hanging on the Helmet lock, the distance of the Exhaust System was exactly right.
In other Helmet, it is likely to interfere with the Exhaust System when locked due to the Length of the jaw cord.
View detail

2016 Can not attach MODELNinja 1000 pump
Although Ninja 1000 which changed the model from 2014 may be common, if it is as it is, it comes into contact with the car body, it can not be forcibly attached.
I cut the hole on the Helmet lock side by 3, 4 mm with File.
After scraping, it became installable, it ceased to touch the car body, and we had a margin of about 2 mm.
View detail

I think that attachment is also easy, and it can do if it is as long as 10 minutes. If there is this [ no ] too, a break will not be taken in comfort, either. It is a difficulty that the Key increases. Probably, the Manufacturer should als
I think that attachment is also easy, and it can do if it is as long as 10 minutes.
If there is this [ no ] too, a break will not be taken in comfort, either.
It is a difficulty that the
Key increases.
Probably, the
Manufacturer should also attach from the beginning!!
View detail

It is pure and is a Parts which can be said to Ninja1000 to which the Helmet lock is not attached as the time-tested product in a time-tested product. The car body is matched, so that the attached figure is also taken as it is pure. A feeling of
It is pure and is a Parts which can be said to Ninja1000 to which the Helmet lock is not attached as the time-tested product in a time-tested product.
The car body is matched, so that the attached figure is also taken as it is pure.
A feeling of
operation is also good and the low prices of a price are goods with a dramatically high degree of satisfaction an interval.
attachment is also easy.
If it is those who can do maintenance every day, attachment is satisfactorily [ at all ] possible.
View detail

[Webike Monitor] attachment is easy. It is the touch which is pure completely. It is touch as attach the Helmet holder by Manufacturers from beginning.
[Webike Monitor]
attachment is easy.
It is the touch which is pure completely.
It is touch as attach the Helmet holder by Manufacturers from
beginning.
View detail

Since pure equipment of the Helmet lock was not carried out, it purchased. attachment is easy, and if it is as long as 5 minutes, it will be finished. Since whole Locke can be immediately removed if a tool is used since it has only stopped with two
Since pure equipment of the Helmet lock was not carried out, it purchased.
attachment is easy, and if it is as long as 5 minutes, it will be finished.
Since whole Locke can be immediately removed if a tool is used since it has only stopped with two
Bolts, a theft may be suited when it has left for a long time.
-- already -- a device -- since I was needed, I was allowed to consider it as three stars
View detail

It attaches to Ninja1000. Since the Helmet holder does not stick by a standard [ for ] one, it is found useful. Since a jaw string will Touch a Muffler if a Helmet is covered since the fixing position is low, it cares in that respect.
It attaches to Ninja1000.
Since the Helmet holder does not stick by a standard [ for
] one, it is found useful.
Since a jaw string will
Touch a Muffler if a Helmet is covered since the
fixing position is low, it cares in that respect.
View detail

Although attached to Ninja1000, attachment is also easy, and the touch currently attached nonchalantly is dramatically good, without overflowing the attached rear car object. It is found useful when separating from a Motorcycle for a long time.
Although attached to Ninja1000, attachment is also easy, and the touch currently attached nonchalantly is dramatically good, without overflowing the attached rear car object. It is found useful when separating from a Motorcycle for a long time. View detail

The Helmet was carried into inside of a shop one by one at mealtime on the Touring, and it was anxious also about the place to place. But probably it troubles now and will not be as if. user-friendliness is not bad. Merely becoming a dedicated key...
The Helmet was carried into inside of a shop one by one at mealtime on the Touring, and it was anxious also about the place to place.
But probably it troubles now and will not be as if.
user-friendliness is not bad.
Merely becoming a dedicated key... It is unavoidable.
Or [ that what is necessary is just to rearrange a Cylinder pin by the duplicate key store if it goes well ].
View detail

The helmet lock is not attached to NINJA1000. Although a helmet lock was hardly used usually, it attached for emergency. However, since the key and helmet lock key of a motorcycle become another, it is trouble a few. As a lock, it is usually t
The helmet lock is not attached to NINJA1000.
Although a helmet lock was hardly used usually, it attached for emergency.
However, since the key and helmet lock key of a motorcycle become another, it is trouble a few.
As a lock, it is usually touch called kana well.
View detail

A helmet holder was not attached to Z1000, and in any way, since it was inconvenient, it purchased. Since the type attached to a handle spoiled the appearance of the motorcycle, it worried about it, but it discovered this product and determined it by
A helmet holder was not attached to Z1000, and in any way, since it was inconvenient, it purchased.
Since the type attached to a handle spoiled the appearance of the motorcycle, it worried about it, but it discovered this product and determined it by prompt decision.
Attachment is very simple also for the set of simplicity and a helmet.
However, when sampling of a key when it sets hits a helmet and a helmet is taken with hot one, it is hard to separate from Locke.
(It is considered because the dignity of the helmet is applied to Locke) Although there is such a subtracting point, without spoiling appearance above all, the helmet holder was attached and it is satisfied.
View detail

When there is no helmet lock in a ninja 1000 and inconveniences were suffered, this product was found, and I also purchased attachment by it being easy. If there is a tool, attachment will be possible by itself. Since I who have left most maintena
When there is no helmet lock in a ninja 1000 and inconveniences were suffered, this product was found, and I also purchased attachment by it being easy.
If there is a tool, attachment will be possible by itself.
Since I who have left most maintenance to the store also attached, please feel easy.
Although there is no telling whether did aim at the object for Z1000 in the hazard, and have designed, the hard shell of a helmet is exactly subsided between a step and a tandem step.
This was delightful miscalculation.
A helmet does not float in the air thoroughly, and since it supports to the step, the load concerning the helmet lock itself is also likely to end few.
it seems to be better to have attached, as it was in in play [ other ], for the screw to have loosened, and to check periodically, since that is right.
Although it seems that it is in evaluation with a rose by a vehicle type, it is related with Z1000 and a degree of satisfaction is *x5.
View detail