Reviews
Used as Bracket for Switch on Grip heater
The Bracket that was originally attached was too long and was bent at the Prank, breaking it off at the base.
This time, I don't think it will be tampered with because the base LARGE size and height of the base are just right and not uncomfortable.
View detail
Installation
I purchased this as an Antenna Bracket for ETC.
At first, it seemed difficult to adjust the angle, but I tightened (the Screw that connects the top and bottom) to some extent,
It is easy to fine-tune and tighten.
Double-sided tape is also included, so no worries.
I put it on my NSER250R SE MC28, but I was not sure where to put it, and in the end I fixed it at the center above where the card key is inserted, where the cables are not damaged (with double-sided tape).
I purchased Silver and it is attached without any discomfort.
View detail
Required Items for ETC Installation
I was concerned about the mounting position of the ETCAntennas and Indicator, so I purchased it. View detail
Easy installation
Even a beginner could easily install it with just a few tools. View detail
ETC Antenna Bracket
I was having trouble installing ETCAntennas on top of the light and around the handlebar, but this bracket seems to have helped me get them into a good position. View detail
Fits: HONDA Rebel500, HONDA Rebel250, HONDA Rebel300
There are personal improvements
It will be installed on REBEL. Installation is easy, but I wanted Bolt color to be Black color. View detail
For installation of Handy radio Antennas and Bluetooth equipment
[How is it used?
For installation of Handy radio Antennas and Bluetooth connectors
Was the one you received as per Image?
Street Image
How was your experience with it?
Easy to install as it is only co-tightened with Mirror
[Points to note]
None
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Large sturdy instead of Waterproof?
I was attracted to the ruggedness of the iron box, not Case like the girls' Pochette.
Installation was easy, but I am a little concerned about the exposed Cable connection on the ETCBody.
View detail
Is good
It is a solid Bracket with a high quality feel.
Double-sided tape is also included and the angle can be adjusted freely, making it easy to use.
View detail
There is a sense of quality
It is solidly made and looks luxurious.
Strong double-sided tape is included to securely attach ETCAntennas.
The free angle of adjustment allows for easy positioning of the Antennas.
It is also highly Point because you can choose your favorite color from three different colors.
View detail
Is good
It is installed with DAYTONA's Bracket for Mirror Holder.
It is carefully made and has a high quality feel.
The angle can be freely adjusted and firmly fixed with the included double-sided tape.
View detail
Is good
ETCAntennas can be securely fastened by installing it together with DAYTONA's AntennasBody Bracket.
It is installed together with Mirror by co-tightening, so it does not get in the way.
The location of Antennas is determined by the Best position.
View detail
Well-fixed
ETCAntennas can be adjusted to any angle and securely fastened for installation.
I think the price is a little high, but it is well made and has a luxurious feel to it.
View detail
Mistuba Sankowa EDR-21 for switch installation
I used Mistuba Sankowa DriveRecorder-EDR-21 for Switch.
The mirror is used in conjunction with the Mirror. The switch itself is installed with double-sided tape.
The process is quite simple.
Lamp lighting is easy to see and easy to use since there is a Drareco Switch by the Handlebar.
View detail
Fits: YAMAHA YZF-R25, YAMAHA XSR700, YAMAHA MT-09, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-10, YAMAHA MT-10 SP, Others , YAMAHA XG250 TRICKER, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA SEROW250, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TRACER GT, YAMAHA NIKEN, YAMAHA TRACER900, YAMAHA SR400
I've been looking all over and this is the one I like best!
During the installation of Antennas, which is required for ETC installation, the
I was looking for a good Bracket for my car because I couldn't install it directly on the body of the car.
There is a short Bracket from the Antennas mounting and the angle is Quantity:Pair (for Left and Right) The number of adjustments can be made to the
This Bracket can also be bent with force to get the angle you like.
Tie Wrap to stop Wiring (inHemp palmuck) and
It also comes with something to protect the Wiring from Antennas through under the Tank to under the Seat.
It is a well thought-out product.
View detail
This is good!
I was struggling with the location of the Antennas on the ETC and the shape of the Bracket, the Cowl and Left SideSwitch controls, and the strength, all solved! I think it is reliable OK. View detail
The goods are good.
Ordered on 10/3 with Partner warehouse in stock on the listing page, arrived on 11/3 with delayed delivery. It was a different color. This happens sometimes. View detail
EDR-21G GPSAntennas
I used it to install GPS Antennas on my EDR-21G.
I used it to organize the various items I have installed around the Handlebar.
View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel300
It is easy to install.
Installation is extremely easy.
If the ETC Wiring is done properly, it can be installed in 10 minutes.
The dissatisfaction point is a little rattling because there is some rattling in the body and the lid part of Case.
I put it on my wife's Rebel, and I put Tape in the gap at the Level that I don't mind at all while driving.
The price is right for this type of product.
View detail
It's not too obvious.
It's a Compact Bracket and it doesn't look so obtrusive.
I chose the Type that co-closes with the Mirror, and the Indicator is perfectly visible in this position.
I don't think the price is cheap, but it's less expensive than other products.
View detail