Reviews
For peace of mind
Purchased to protect myself and justify my own driving while driving on Motorcycle.
The product was relatively easy to install and complete.
It took some thought to run the Camera wires through the interior of the car body, but the rest of the connection was completed in comparative perspective.
The recorded images are clear and secure with no problems.
There is no GPS function, but the situation is satisfactory enough if you want to check the driving conditions.
View detail
Screen is very easy to read
If a USB Socket is attached to the Handlebar, it can be easily connected. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Refreshing.
I am happy to be able to install the DriveRecorder-Body without having to worry about where to place it.
It is Stage of Exactly on Body.
View detail
![Tire Pressure Sensor (Front/Rear) [for AIO-5Lite]](https://img.webike-cdn.net/catalogue/images/128410/SRS-002_01_TS.jpg)
Fits: Others AIO-5 Lite
It's a relief to have it.
[How is it used?
I am very satisfied
Was the one you received as per Image?
I think it's a little large.
Was the installation difficult?
I was able to install it with no problems at all.
How was your experience with it?
Satisfied because I can always check the air pressure
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
No
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Display may not be necessary during Navigation/Drareco screen
View detail
![Pro Wireless Remote Control [for AIO-5Lite]](https://img.webike-cdn.net/catalogue/images/128410/SRS-006_01_TS.jpg)
Easier to operate.
[How is it used?
easy to handle
Was the one you received as per Image?
I was surprised at how small it was!
How was your experience with it?
I can't imagine being without it anymore.
[Points to note]
aspect of installation
How did it compare to other products?
No comparison
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I would like a little more flexibility in the mounting Bracket.
View detail
tightly packed
It suited my purposes as I could use almost the entire length of the bar from one end to the other.
Quantity:Pair (for Left and Right) If the BALI had been removed, the quality and texture rating would be 5 stars.
View detail
Thin but rigid.
Plate itself is thin but rigid.
It is very helpful that a Bolt for fixing the Camera on the DriveRecorder is also included!
Installation of the bracket itself is very easy as it is co-tightened with the License Plate.
View detail
Sounds pretty good.
Installed on Shoei J Cruise. The installation took 1 to 2 hours with the help of Youtube.
The only purpose of use is to listen to music, and Income is not used.
I chose it because it claims high sound quality, and the sound quality is quite good. (Hobby Audio system).
However, when the speed is increased, the sound of the wind becomes loud, and the high sound quality is lost. 。 It's really good when it stops. (not the fault of this machine)
If you just want to play music, send songs, and adjust volume, Button operation is no problem.
It is better to use the included thicker Seat for better sound quality since the Speaker is closer. (If it doesn't hurt your ears when it hits them)
High mileage with 80% battery remaining (announced) after 7-8 hours of listening.
I think it would be very good with Motorcycle with good wind protection.
View detail
![Motorcycle Drive Recorder "MiVue(R) M820WD" with GPS [Drive Recorder]](https://img.webike-cdn.net/catalogue/images/133360/20240315_daytona_driverecoder_sd_1080_1080_TS.jpg)
Pretty good
I don't know about other drarecorders, but it is a normal shot.
Command on Switch is easy to understand and the UserInterface of the application is very clear.
I feel that the parking monitor is less likely to be triggered by the weak battery in SR400. However, the engine is started within 5 KICKs.
View detail
KaEdia is still good!
Although many companies have released SMARTMonitor, I have been waiting for CaEdia's product. I have been waiting for a product from CaEdia because, after all, it is the most cost-effective. I have purchased many of KaEdia's products and knew their high quality and high cost performance, so I had no hesitation in deciding that the SMARTMonitor would also be made by KaEdia. After more than two months of ordering, the SMARTMonitor finally arrived.
There was a small product defect there. It was a paint bald on the housing.
I immediately contacted KaEdia and they were able to promptly replace the item with a good one. As expected of JapanBrand ^ ^.
After installing it, the actual feeling on the Motorcycle is perfect!
View detail
Very good
Delivery was fast, and the product was great. I would like to recommend it to everyone. Very good. Highly recommended. . View detail
DAYTONAMulti Bar Holder。
This is a quintessential DAYTONA product.
Fitting is outstanding.
Holderetc. on the bar.
View detail
Just attach it to the phone cover.
Quantity to Holder:Set is 90-degrees rotation, so the phone is in portrait and the Quantity:Set or beside Quantity:Set or not Set is determined by this orientation.
I can change it on the Holder side with Hexagonal Wrench.
I use it every time I go touring and have no problems.
Large Variety Satisfaction
View detail
For those who don't want to stand out with SimpleStyle
There are many different Smartphone Holders, but I think this product is the most discreet and easy to install.
In fact, it is so close to the Top Bridge that its presence can be eliminated.
If you want visibility, you can choose a Type to attach to the Handlebar.
Installation on the Holder is simply a 90-degrees rotation to fit the groove.
It will not loosen or fall off.
Satisfactory product
View detail
Fits: HONDA Super Cub 110 Pro, HONDA Super Cub 50, HONDA Cross Cub 50, HONDA cross-cub 110
Mount bar for CROSS CUB
I found this product when I was looking for a mount bar to attach additional meters.
Since the installation was requested by the Shop, the details of the installation method are unknown, but it appeared that the Meter panel was removed and this product was co-tightened using the included Bolt.
The bar is now in a position that is very easy to see when driving.
Attached to the bar is an iPRO ShiftIndicatorAPH8 Red ・ SP MukawaΦ48Small DN Tachometer 12500rpm (with Rev indicator) ・ NeoFACTORY48mm Voltage Meter White Panel Stainless
When installed at the same time as the KITACO Neck Cover, modification is required for either one of them due to interference. (Modification of the Neck Cover is recommended.)
View detail
Good multi bar!!
It's a really good product. Both the finish and the design are excellent. I bought the multiba twice. Thank you for your prompt delivery. I recommend this product to others, too View detail
No worry about falling off.
There is no sign at all that the 120km/h section of the New Tokyo-Nagoya, the Decoration bumpy road, or anywhere else you might fall off.
Vibration absorption capacity is also very high.
I have tried a few and they are by far the most secure in preventing drops, and if you are really worried, you can easily lock it with Lever.
It is very easy to use as it is easy to connect Charger.
The only complaint I have is that it is difficult to clean because dust tends to accumulate in the groove where it is fitted.
Also, some people have a problem with the way it looks. (Depending on Motorcycle) It may seem a bit lumpy.
View detail
Can be used with ZETAHand guard
It is the same φ22.2mm as the Handlebar, and I purchased it to install a Smartphone Holder and a radio-controlled watch. I was a little worried that it might interfere with the ZETA hand guard I bought with the CT110 HUNTER CUB, but it was the same manufacturer and I was able to install it easily without any interference at all. Installation was done with just one HexWrench. After the installation, there is no rattling at all, so it seems to be useful for reinforcing the rigidity of the handlebar a little.
I am happy with the Handlebar because it is less cluttered around the Handlebar and is more Refreshing than I expected. I don't need anything else near WITH Handle other than these three. (USB power supply is already secured at another location) So, this is sufficient in terms of capacity. If I replace it with a Multimeter with a clock, I'll be more Refreshing, since I won't need a radio clock.
View detail
Fits: Others
Mounted on CUB 110cc Crank bar
We replaced the Rubber part of Crank Bar's Smartphone Holder with this one.
When I run, the phone is still vibrating in Small increments due to vibration. I'm not sure how much the vibration is reduced, but I think it's good for preventing breakdowns.
View detail
It is quite good.
Although it takes 60 seconds to establish the connection due to the Radio Law, this product uses a soft power supply that shuts down 5 seconds after the ACC power is disconnected, so even if your car model shuts down the ACC power at the time of cell start, as seen in BMW etc., the power will not be turned off when the engine starts. Therefore, if you put on the Helmet and Gloves after turning on the key first, you will be connected to your smartphone by the time you step over and turn on the Cell, and you will not feel the stress of waiting for the connection.
If your vehicle is equipped with a 12~16mm GPS Mount Bracket, the Tanax AIO-5 Mounting Bracket can be used without modification.
The cost performance is great, but the screen size of 4.5-inches is a little insufficient.
View detail