Reviews
No more running out of pegs
The bag fits easily around the waist on either side & it's a breeze to store all the pegs in it without hassle & there's a Velcro partition to separate pegs in the bag. The holder for a peg hammer is quite useful & there's an extra zip up pocket for any extra items as required. View detail
Good multi bar!!
It's a really good product. Both the finish and the design are excellent. I bought the multiba twice. Thank you for your prompt delivery. I recommend this product to others, too View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA CROSSCUB110
It's solid
We are getting bummed for the CUBCampingDebut.
I have considered and compared various side bag supports from various companies, but I chose Nana Company's side bag support.
I have decided!
It is a solid and firm installation kan tan.Quantity:Pair (for Left and Right) Therefore, it is a good value.
View detail
a gift purchase
Very small and cute keychain item. Great to carry on your bag or key. The quality of the Tone tool is also good. It is a good size for emergency use. View detail
It can be used occasionally.
Very small and cute keychain item. Great to carry on your bag or key. The quality of the Tone tool is also good. It is a good size for emergency use. View detail
Fits: Others
Mounted on CUB 110cc Crank bar
We replaced the Rubber part of Crank Bar's Smartphone Holder with this one.
When I run, the phone is still vibrating in Small increments due to vibration. I'm not sure how much the vibration is reduced, but I think it's good for preventing breakdowns.
View detail
It is quite good.
Although it takes 60 seconds to establish the connection due to the Radio Law, this product uses a soft power supply that shuts down 5 seconds after the ACC power is disconnected, so even if your car model shuts down the ACC power at the time of cell start, as seen in BMW etc., the power will not be turned off when the engine starts. Therefore, if you put on the Helmet and Gloves after turning on the key first, you will be connected to your smartphone by the time you step over and turn on the Cell, and you will not feel the stress of waiting for the connection.
If your vehicle is equipped with a 12~16mm GPS Mount Bracket, the Tanax AIO-5 Mounting Bracket can be used without modification.
The cost performance is great, but the screen size of 4.5-inches is a little insufficient.
View detail
Changed to wire lock.
The one I was using before broke from the middle due to deterioration and I couldn't use it anymore. I was looking for something less likely to break and switched to this one made of Wire.
I think it is supple and easy to use without being oddly heavy. How about durability? I guess so.
I don't know how it will turn out, so I give it 3 stars for durability.
View detail
Fits: YAMAHA FJ1200, HONDA RVF, SUZUKI MARAUDER125, SUZUKI Banted 1250, SUZUKI Banted 1200S, SUZUKI DESPELADO800, SUZUKI DESPELADO400, SUZUKI SV650S, SUZUKI SV400S, SUZUKI SV1000 S, SUZUKI SV1000, SUZUKI RF900RV, SUZUKI RF900R, HONDA CB550, HONDA CB750, HONDA X-11, KAWASAKI GPz1000RX, HONDA STEEDVIS, HONDA STEEDVIX, HONDA V-TWIN MAGNA
be too much
XJR1300 is written as 3L Size, but the Size is too Small to talk about. View detail
Holder's clattering sound is gone.
[How is it used?
I bought this product additionally because I was told that iPhone breaks Camera by vibration.
Was the one you received as per Image?
It was larger than I expected.
How was your experience with it?
I am not sure if the vibration of the phone itself is reduced and the Camera is protected, but the Smartphone Holder itself used to make a rattling sound, but that sound has disappeared, so I think the vibration is absorbed.
[Points to note]
The mounting position needs to be adjusted as it increases the bulk considerably.
How did it compare to other products?
I wanted to use DAYTONA's Smartphone Holder, so I didn't compare it to other products.
View detail
Paint job is messy?
Matte paint nomenclature is present, but the overall texture of the paint is nowhere near as good.
The peeling paint on the Bolt is particularly disappointing.
Nevertheless, it is nice to be able to add Accent by using the Cap bolt collar, which is sold separately.
View detail
Can be stored in a lint-free container!
Large enough for long touring from city driving to long touring! It has enough capacity not only for full face but also for long touring for one or two days and nights staying at a business hotel! Large is also waterproof! It is also waterproof! View detail
For Earth Rock
[How is it used?
I use Disc Lock and Tire Lock, but I was looking for a chain lock that can connect a lock to a building.
Was the one you received as per Image?
It was just like the image.
How was your experience with it?
The chain is quite thick and well made, so it feels secure and has a great deterrent effect. The padlock part seems a little cheap.
[Points to note]
Not particularly.
How did it compare to other products?
Since this length and make of Chain is less than 10,000 yen, I think the cost performance is quite good. Even expensive products are stolen when they are stolen.
View detail
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
I think it is necessary and sufficient.
This is just my personal opinion, but I think it is not a PeLePera, and considering the price, I think it is satisfactory enough. View detail
Circuit Running
I want to measure lap time in Circuit.
Purchased
I still need to know where to install the Sensor part and Wiring.
It was Large strange to pull it in.
We will verify if Time can actually be picked up properly.
View detail
Large size and shape are just right.
The size and shape are just right. The thickness of the gusset is also good.
unassertive (Extremely normal) Because it is Design,
I think it fits any person and motorcycle.
View detail
It's broken
It's been great to use and no pain in my back, but it broke cleanly after about 7-8 months. It may not be strong enough. I would like to see a different attachment method or an increase in the thickness of the steel plate. View detail
Hole concealment of fret & mdash;厶
Holes were drilled and painted Silver. View detail
Fit perfectly
easy to install , just need to know how to open the left side cover so that you can plug & play the wiring which is already there , only need to remove the dummy cover View detail
Used as Bracket for Switch on Grip heater
The Bracket that was originally attached was too long and was bent at the Prank, breaking it off at the base.
This time, I don't think it will be tampered with because the base LARGE size and height of the base are just right and not uncomfortable.
View detail