Reviews
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA XJR400RII, YAMAHA DIVERSION, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJ400ZE, YAMAHA XJR400, YAMAHA XJ400Z, YAMAHA XJ400ZS, YAMAHA XJ400D, YAMAHA XJ400S, YAMAHA XJ400, YAMAHA SR400, YAMAHA FZR400RR-SP, YAMAHA FZR400RR, YAMAHA FZR400, YAMAHA FZR400R, YAMAHA FZR400
Motorcycle Cover
I bought this as a Cover for my XSR900 RN80J.
In my case, I keep my motorcycle in a warehouse and use the Cover not for rain and wind but for dust and small animals, so this is enough.
The size feels a little too Exactly and I would have preferred it to be a little looser.
Unfortunately, I have purchased and used another Size before, and there is a lint-like substance left on the inside of the Motorcycle, and when I put the Seat on and remove it, the lint gets on the Motorcycle. I would like to see something done about this.
View detail
Fits: HONDA NC750X, HONDA CB1000R, HONDA CB650R, HONDA CBR650R, SUZUKI V STROM250SX
cool-looking
Installed on a CB650R Rear Carrier.
I am very satisfied with the look of the Parenthesis after installation and the ease of removal and installation.
If I had to say something, I would say that I thought the capacity was low and I wish I had chosen the adjustable Type.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250SX, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM800, SUZUKI DL1000 V-STROM800DE, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000XT, SUZUKI DL1000 V-STROM1050DE, SUZUKI DL1000 V-STROM1050, SUZUKI DL1000 V-STROM1050XT
Small for LSize.
I chose LSize because the VSTROM250 T-shirt I had previously purchased was a Large size XLSize, but it is a Small size. I chose LSize because it was the only size in stock at the time of purchase. My size was between XL and L.
I am satisfied with the Design and Material.
It is charming that the Motorcycle Print does not depict the Handlebar Cover of the VSTROM250.
View detail
The proper Guard you've been waiting for (A little too close)
SXRider running off-road was waiting for us. (?) It is an Under Guard that properly guards a wide area,
The stones that FTire bounces up on gravel and crushed stone forest roads are quite vicious (especially if the Tire is Block pattern).
OEMUnder Guard that does not Cover Under at all, EngineSIDE has Wound quite roughly.
I was worried that the crankcase might crack, so I was waiting for this product that covers from the UNDER to the SIDE.
There were no particular difficulties in installation, and the screws did not fit.
When the installation was finished and the Engine was hung Something's making too much noise!"
Apparently the Engine sound is resonating with the Under Guard, I wonder if the thin board thickness has something to do with it?
When driving, the exhaust sound is more audible than the sound of the car.
I used it for a while, but the sound was bothering me and I thought I had no choice but to remove it. I thought I would have to remove it.
suddenly "Wouldn't it be better if the Engine's vibrations weren't transmitted, and what if we rubber-mounted it?" then it occurred to me
Remove the Rubber Bush and Collar from the OEM Under Guard.
I widened the mounting holes of this Under Guard to about 12mm and installed it using the OEMRubber Bush.
The sound that had been bothering us has completely subsided.
The OEM Rubber Bush was only used in four locations, so I installed it at four points, but so far I have had no inconvenience.
I know sound perception varies from person to person, but I think it's pretty loud, I wonder if it didn't bother you at Manufacture?
Also, the CrimpNut came off in one place after just one detachment, so that's another point deduction.
If not for the above, I would be generally satisfied with the product.
View detail
Fits: Others , SUZUKI V STROM 650
I was able to pimp it!
It was easy to replace the OEM Relay with the MAJESTY4HC, just by pushing it in a little. View detail
Fits: TRIUMPH STREET TRIPLE, TRIUMPH SPEED TRIPLE S, DUCATI M400S, MV AGUSTA BRUTALE750S, DUCATI M400METALLIC, DUCATI M400DARK, DUCATI M400DARK, DUCATI M400, DUCATI M400, DUCATI M400, DUCATI M620S, DUCATI M600, DUCATI M620, DUCATI 620SPORT, DUCATI MONSTER696, DUCATI M750, DUCATI M750, DUCATI SS750, DUCATI 750SS, DUCATI SS750
I buy regularly.
I buy it regularly because I get tears around the Mirror and Tandem seat area after about 2 years.
In winter, static electricity tends to occur and crackles when putting on and taking off.
View detail
Fits: SUZUKI GSX250R, HONDA CB1300SUPER FOUR, YAMAHA YZF-R25, SUZUKI GSX250R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR SP, HONDA CBR250RR ABS 2BK-MC51, HONDA CB650R, HONDA CBR650R, HONDA NC750X, HONDA CB1300SUPER BOLD'OR SP, SUZUKI GSX-R125, HONDA CB1000R, Others , SUZUKI GSX1300 HAYABUSA, YAMAHA MT-07, YAMAHA YZF-R3, KTM DUKE250, KTM 390 DUKE, KAWASAKI NINJA 250
Installed in grom. Satisfied.
Installed in grom. Colors are Carbon & Black.
It is unobtrusive and fits in nicely.
The capacity was fine as long as Small things could fit in it.
(I think it is considerably less.)
It is also good for getting in and out of the car and not getting in the way while riding.
Conveniently made so that contents do not fall out when inserting and removing items.
View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB, HONDA CL250, HONDA CL500, KAWASAKI Z650RS, SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI GSX250R, SUZUKI V-STROM250SX
No difference
I installed it on my CT110 HUNTER CUB. As you can see in the picture, there is no discomfort as if it is OEM, and it allows more flexibility to attach a Smartphone Holder or a Hook. View detail
Fits: SUZUKI Gixxer SF 250, HONDA CB1300SUPER BOLD'OR, HONDA NC750X, HONDA CB1300SUPER FOUR, HONDA CRF250RALLY, HONDA CB1300SUPER FOUR SP, HONDA CBR650R, YAMAHA MT-25, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR SP, HONDA CRF250RALLY S, SUZUKI Gixxer 150., KAWASAKI VERSYS-X 250 ABS(17) KLE250D, YAMAHA MT03, Others , SUZUKI V STROM250SX
just right
MT-03 had no storage space at all and I used to put small things in my leg bag. But I still wanted more storage space, so I bought this bag.
When I put it on, I found it to be just the right size, a design that does not destroy the Motorcycle's image.
It can hold enough for a one-day trip, including on-board tools, spare gloves, a rain jacket that folds into a compact size, and dustcloth.
The assumption is that you will not bring back any souvenirs.
View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650, Others , SUZUKI V STROM 250SX, KAWASAKI Ninja ZX-4R SE, YAMAHA XSR900 GP
Maintenance Stand
[How is it used?
For maintenance at home
Was the one you received as per Image?
Expected
Was the installation difficult?
Easy
How was your experience with it?
Additional Cheap
[Included Parts:were they on?
It was there.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
Combined with Bolt of various colors from other companies
It fits exactly with the Cap boltM6 size of the DURA-BOLT Shoulder Bag.
https://www.webike.net/sd/20949262/
View detail
Fits: KAWASAKI Ninja650, KAWASAKI Ninja250, KAWASAKI Z250, KAWASAKI Ninja400, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI V-STROM250SX, SUZUKI V-Strom250, SUZUKI GSX250R, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4R SE, KAWASAKI Z400, KAWASAKI Ninja ZX-25R, KAWASAKI Z650RS
This is a must for the Z650RSRear Stand.
Easier to use than KawasakiOEMP Racket because it has fewer parts.
I think there is some confusion on the order of installation on Bolt because there is no Instruction Manual.
Parts that are generally removed after maintenance is completed.
It needs a place to put it and a container.
Sometimes I see people running with parts attached. Screw lock." etc. to fix it firmly in place.
It is easily dislodged by vibration. Be careful because it is dangerous.
View detail
Fits: HONDA CB1300SUPER FOUR SP, HONDA NC750X, HONDA CB650R, HONDA CBR650R, HONDA CB1000R, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, KAWASAKI ZEPHYR1100, YAMAHA MT-09, Others , KAWASAKI NINJA 250 ABS, SUZUKI V STROM250SX
Exactly for XSR155, although the capacity is low.
I chose it for its appearance.
It is for hot springs and SUPER public baths and can be removed and taken with you as is when you arrive at the site.
Most importantly, it looks good.
It just depends on where it is installed, but I am a little concerned about the handle hitting the Tail Lamp.
View detail
Fits: HONDA CB1300SUPER FOUR, HONDA CBR250RR ABS 2BK-MC51, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1000R, HONDA CBR650R, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB650R, HONDA NC750X, SUZUKI GSX-R125, SUZUKI GSX250R, SUZUKI GSX250R, YAMAHA YZF-R25, Others , SUZUKI GSX1300 HAYABUSA, YAMAHA MT-07, YAMAHA YZF-R3, KTM DUKE250, KTM 390 DUKE, KAWASAKI NINJA 250
Small Bag
The storage capacity is small but does not ruin the Motorcycle's appearance! View detail
Fits: SUZUKI GSX-S750, HONDA CBR500R, YAMAHA YZF-R3, HONDA CB500X, HONDA CB150R, HONDA CB300R, YAMAHA YZF-R25, YAMAHA XSR900, SUZUKI GSX250R, SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-R125, KAWASAKI VERSYS-X 250, HONDA PCX125, HONDA NC750X, HONDA CBR650R, HONDA CBR650R, HONDA CBR400R, HONDA CB650R
Good as One point
The color is the same as the other Anodized Treatment products, which gives a sense of unity, and I am glad it was One Point. Installation was easy, just by replacing the bolt that came with it.
Ninja400 2023
View detail
Fits: Others , YAMAHA Tracer900, DUCATI SS900, SUZUKI DL1000 V-STROM1050, SUZUKI DL1000 V-STROM650, SUZUKI V STROM250SX
Touring Seat Bag
I bought it for Touring with my company mates.
Helmet (Z-8) It is also convenient because it can hold a large bag.
It is likely to remain installed as is.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA XJR400RII, YAMAHA DIVERSION, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJ400ZE, YAMAHA XJR400, YAMAHA XJ400Z, YAMAHA XJ400ZS, YAMAHA XJ400D, YAMAHA XJ400S, YAMAHA XJ400, YAMAHA SR400, YAMAHA FZR400RR-SP, YAMAHA FZR400RR, YAMAHA FZR400, YAMAHA FZR400R, YAMAHA FZR400
Solid material and good durability
[How is it used?
It is used for YAMAHA/TZr50R.
The Motorcycle Cover that we had purchased for about 2000 yen was torn after about 6 months, so we decided to purchase a solid material one.
How was your experience with it?
The material is thick and quite easy to use.
I bought the large size so that I can use it for XJR400R, so it is a little too large for TZr50R, but no problem.
How did it compare to other products?
I think the fabric or material should be Large, as it is exposed to UV rays, rain and snow all year round.
The Motorcycle Cover I purchased for 2,000 was claimed to be waterproof, but it was thin and water permeated through it very fast, but this one repels water very well.
[Points to note]
Although it is not a caution point, we still think it is better to double the Motorcycle Cover to make it last longer.
I currently have a double Motorcycle Cover on my XJR, but I feel that the inner Motorcycle Cover is deteriorating very slowly. I would like to put a cheaper Motorcycle Cover on the outside on this TZr in the future.
View detail
Fits: HONDA CB1300SUPER FOUR, HONDA CBR250RR ABS 2BK-MC51, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1000R, HONDA CBR650R, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB650R, HONDA NC750X, SUZUKI GSX-R125, SUZUKI GSX250R, SUZUKI GSX250R, YAMAHA YZF-R25, Others , SUZUKI GSX1300 HAYABUSA, YAMAHA MT-07, YAMAHA YZF-R3, KTM DUKE250, KTM 390 DUKE, KAWASAKI NINJA 250
smallish
It is much smaller, but I don't want to ruin the appearance of the motorcycle, so I think it is just right. View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
Clean finish, excellent Design
A simple custom that improves the look and feel of the product.
A silver color was selected, which is not too conspicuous.
Excellent Design with a beautiful finish.
It is indeed a DAYTONA product.
Incidentally, near DAYTONA's headquarters
Purchased at a store in Mori Kakegawa ServiceArea.
We have a few DAYTONA products.
View detail
Screen bracket after all this time
I'm just now getting around to posting my impressions,
Convenient and beautifully made.
Screen is used at original height.
Holder is installed for smartphone navigation.
It is easy to see with less line-of-sight movement.
View detail