Reviews
Cost good.
I am satisfied with the appearance of the product for the cost. View detail
Double Bulb included is a nice touch.
The OEM stop-lamp ran out, so I replaced it with this Smoke Type product as a change of pace. It looks better than it does in the picture. [Color] Smoke feel." The "M" is a little bit smaller than the "L" and does not look bad even if an old man rides on it! View detail
very good
This is a part that can be easily installed. It also shows high satisfaction compared to the price of the parts and the difficulty of the installation work. The painting and quality of the product are perfect.About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Fits: KAWASAKI ZEPHYR400χ, KAWASAKI ZEPHYR400
A sound that evokes the good old Showa period.
The MAJOR Short Tube is an old car-style custom exhaust system with a Showa-era sound, appearance, and appeal that is still very popular today.
With the popularity of the East Ribeye and other models, there are more and more opportunities to see vehicles with Short Tubes on motorcycles ridden by the younger generation.
What is Short Tube? ‥
Basically, it comes from the old Racer.
In other words, when cars were regulated without silencers, racing parts were used in production cars or were given a look-alike appearance because the performance would be improved if a set was added.
Performance and characteristics
The sound is Large and the low-speed Torque is weakened. The sound is Large and the low-speed Torque is weakened.
The lower exhaust pressure makes the start of the system feel slower.
Torque is obtained by utilizing the exhaust pressure of the engine. 。 If there is no exhaust resistance at all, the Engine will turn lightly 。 → On the other hand, there is no resistance (no snagging) → the low-speed Torque is eliminated because the exhaust Gas flows as it is.
Exceptions are...
Short Tube, such as MORIWAKI and YOSHIMURA = JMCA Certified Exhaust System, looks like a Short Tube, but its internal structure is completely different, and it has a device to suppress demerit while producing merit. 。 Torque is lost to the extent that such things are installed.
Short Tube Intake Setting (Torque shortage cover method)
● Fueling to compensate for the lower Torque.
→ low speed range Raise the Pilot or Slow Jet number. The fusion point of squeezing out Power by turning to high RPM and at the same time applying Torque at low RPM to go around the Corner is the so-called Setting." It is a thing called 。 Short Tube not managed by Torque." The reason why the motorcycle that was made to be a "3.0" is revved to a very high rpm at start or acceleration is because "it would not go forward otherwise".
It is because it is "Motorcycle without Motorcycle".
In a youthful indiscretion, I put this on my ZEPHYR because I wanted something inexpensive, cool looking, and with an austere sound (laugh) &arrarr; Now I regret it (laugh).
good point
◎ Inexpensive. At the time, this was Mast (laughs).
◎ Sound. To describe it in words, bobbing → blowing with Idling is a fawn (lol) The sound when the Engine is turned is pleasant.
◎Installation accuracy is not bad for the price. Easy installation.
◎The appearance is good.
◎ Not only ZEPHYR, but also many air-cooled 4-cylinder lineups.
A bad point
The sound is too loud to pass inspection. 。
Center Stand cannot be used due to the mounting position.
▲AfterFireYa started to go out at low and mid speeds, to the point where the Engine was jerky and un-runnable as if it was Knocking. Carburetor setting to compensate for the low-speed part eliminated the problem.
Rust-prone.
The welding of the ▲Bracket section is unreliable.
Baffle removal is rather tight and difficult to remove.
In other words, putting a Short Tube in the modern era is the old Racer style! 。 According to the theory of exhaust system construction, a short exhaust system tends to lack low-speed torque because it is unable to accumulate sufficient exhaust pressure.
Many of them will not even be muffled properly. 。 There are many different Muffler makers, so it is hard to generalize, Short tubes are a type of tube assembly that are characterized by their wilde sound, which helps to create a badass look. Many of them have too much openness, so they tend to lack low-speed torque. Can we say?
But I digress...
Q:Why doesn't a pure Racer, with no sound restrictions, have a Super Short Tube? Or not remove the Exhaust System?
A:It only increases rotation when exhaust pressure is removed, The power to kick the ground. Because there will be no more 。
The appearance and sound of many Demerits are appealing, and if you are thinking about purchasing one, please take into account that the act of customization = self-responsibility.
I think it is a decent product for the price.
View detail
Colors.
Restore, and since the Brake lever did not get a satisfactory shine even after polishing, I ordered a Lever Cover.
However, since Blue is no longer available, I decided to go with Red.
Since it is a moped, the ball at the leBar End is small, so it was easy to attach.
It is soft, and the operation is comfortable and Recommendation.
View detail
Fits: SUZUKI ADDRESS V50, HONDA XR50 Motard, HONDA SS50, HONDA SL90, HONDA SL125S, HONDA MD90, HONDA CS90, HONDA CS50, HONDA CS125, HONDA CM125, HONDA CL90, HONDA CL70, HONDA CL65, HONDA CL50, HONDA CL125, HONDA CB93, HONDA CB92, HONDA CB90, HONDA CB50, HONDA C92
Very happy
Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail
Fits: SUZUKI RG200 gamma [gamma] F N 92, SUZUKI Wolf 250, SUZUKI Wolf 200, SUZUKI Wolf 125, SUZUKI Impulse 400, SUZUKI Impulse 400, SUZUKI Impulse 400, SUZUKI Inazuma 400, SUZUKI RG125 gamma, SUZUKI GSF750, SUZUKI GS400E
Not bad
Not much different from the OEM, which is good enough for me.
I don't know about durability.
View detail
We were able to immeChain at a reasonable price!
I am very satisfied with the Plating, which gives it a luxurious feel (in my opinion) and Large. The impression has completely changed.
I read in the comments and the instruction manual that the ETC receiver in the Meter may not be able to receive the signal unless it is relocated, but some other sites said it was Large sturdy, so I installed it without relocating the receiver. In my case, the Gate opened and closed without trouble, so I am relieved.
View detail
Blinker Relay 12V 2 Pin for LED
Blinker relay went bad, so I bought this one.
I'm thinking of using an LED Blinker in the future, but not LEDs at the moment, but that hasn't been a problem.
View detail
Orange color and different!
I am using the same type of fog in Orange color with the same type of car (Ninja 250SL), but…the light is a little darker. I'm sorry to say that the response is a little sluggish…Orange color is more recommendation! View detail
Too small
It was too small and I did not use it. View detail
Stable and low-load operation.
The Normal blinker relay was not stable and was replaced with this one. the Normal had a click-chica-chica-chic sound and vibration, but this one has no sound or vibration. Moreover, the blinker bulb seems to be brighter without changing. View detail
Fits: KAWASAKI GPZ600R, KAWASAKI Z250FT, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI GPZ250, KAWASAKI GPZ250R, KAWASAKI GPZ400, KAWASAKI GPZ400R, KAWASAKI GPz400F/F2, KAWASAKI KLE250 Anaero, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI ZR-7/S, KAWASAKI ZX-4, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI Eliminator 250, KAWASAKI Eliminator 250LX, KAWASAKI Eliminator 250SE
be too thick
be too thick
Size is not right, so I stopped using it.
View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400, KAWASAKI GPZ400F, KAWASAKI Z400FX, KAWASAKI Z400GP
cheap
OEM Product was dirty for Large, so it was replaced.
No problem for use
View detail
More than the price
Purchased for SUPER CUB110 (JA59).
Machining accuracy is quite rough. (Sweat)
But I was able to install it without any problems,
ShieldBody was Beauty when the protective film on both sides was removed.
It is good to keep the wind out of the room.
I am Large satisfied with this price.
View detail
Nipple is missing.
Not enough Nipple. (I was in a hurry.) We reused some of the old Nipple we had removed and assembled it.
It is very disappointing because the quality is perfect.
View detail
Easy to process
We found a Handlebar Cover for a Universal Product, but it was a material that could be processed with a Cutter Knife.
The bolt for installation was Moss-green, not Gold, and will be replaced with a commercially available bolt at a later date, as it does not match the black carbon style.
View detail
Monkey 125 brake hose guard
I purchased the 2023 Monkey 125 thinking it was not equipped with a brake hose guard.
The genuine hose guard is also installed in black, but it was installed in yellow to give it an accent.
After installing it, it is pretty and stands out.
I highly recommend it if you want to match it with yellow.
-------------------------------------------------- -------- I bought a 23-year Monkey 125 and didn't have a brake hose guard. The genuine hose guard is also mounted in black, but it is installed to give points in yellow. It's pretty and good to see it. If you want to fit in yellow, it is highly recommended. Powered by Google Translator
View detail
Bolt is highly universal and can be used for various purposes other than Screen.
[How is it used?
I purchased the OEMPin that holds Screen to Cowl because it was getting tired with age, but I had a few left over and decided to use them for another purpose.
Was the one you received as per Image?
The product was just as bright Blue alumite as the image in Webike's product introduction section, and the color was exactly as shown in the Image with almost no difference in color.
Was the installation difficult?
When used for Screenetc., the OEM fixed pin (Rivet?) may need to be removed depending on the car model.
It takes some time to remove the OEM parts that are not Bolt type.
Once you have finished removing it, it is easy to fix using this product.
If you simply want to use it as a 5mmSize Bolt, it is even easier to simply replace it with the part that uses the OEM 5mmSize.
How was your experience with it?
Although not much time has passed since I started using it, I have not seen any fading, which is common with anodized dyed products.
Since it is a 5mm size bolt, it is not used often except for the Screen, but since a 5mm bolt was used as part of the exterior fixing of the Little Cub, the extra bolt was used to fix it in place.
Since the material is aluminum, it is not suitable for places where high additions are applied, but it works well enough for places where the exterior is fixed.
[Included Parts:were they on?
Material:Bolt of Aluminum with 2 Washers of Nylon and Well nut Quantity:Set contains 10 pieces.
[Was there anything that disappointed you?
If you can use it as described above, you can save money because there is a surplus even if you use it for screen depending on the type of car.
Other items that would be helpful
Point and hang of installation
Unlike steel or Stainless Steel, Aluminum is a soft material. When tightening or unfastening, insert the Hexagonal Wrench firmly and work carefully.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
Bolt and Nut's Quantity in a nutshell.:It is a Set, a very straightforward product.
[Notes]
As I said above. Proper Torque Management with Proper Tools." Anodized dyes and anodized dyes will inevitably fade under ultraviolet light, so if the dyes are not to be used for a long period of time, it is advisable to cover them with a body coverretc. to cut the UV rays.
[ITEMS TO BUY TOGETHER
If you want to use it to fix the screen when replacing the screen, use a new screen; for other uses, use a new screen. . the goods that will be required for its use." at the same time, you can save on shipping costs.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible as it is easy to use.
View detail
Quality!
The plating is of good quality with no floating!
I used it to Repair a Blinker that was mogged when it fell over and I am Large satisfied!
View detail