
Reviews

Fits: HONDA CRF150RB, HONDA WW150 AC, HONDA WW150 AC, HONDA WW150 AC, HONDA WW150 AC, HONDA VTX1800R1, HONDA VTX1800R1, HONDA VTX1800R1, HONDA VTX1800R1, HONDA VTX1800R, HONDA VTX1800R, HONDA VTX1800R, HONDA VTX1800R, HONDA VTX1800R, HONDA VTX1800R, HONDA VTX1800R, HONDA VTX1800R, HONDA VTX1800N3, HONDA VTX1800N3, HONDA VTX1800N3
Assembly was completed without any problems.
I have a 2006 CBR1100XX and the piston was sticking, so I am glad I was able to procure the parts. I'm glad I was able to procure the parts. View detail
![Fork Top Breeder Type S [SHOWA/KYB]](https://img.webike-cdn.net/catalogue/images/45913/ze91_13xx_14xx_TS.jpg)
Fits: GASGAS EC250, GASGAS EC300, GASGAS ENDURO GP250, GASGAS ENDURO GP300, GASGAS XC250, GASGAS XC300, HONDA CR125R, HONDA CR80, HONDA CRF250R, HONDA CRF250X, HONDA CRF450L, KAWASAKI KLX450R, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KX450F, SHERCO 125SC FACTORY, SHERCO 250SC FACTORY, SHERCO 250SCF FACTORY, SHERCO 300SC FACTORY
FFork air bleed will be easier.
FFork's air-bleeding screwdriver, the OEM Minus groove, has become licked or deformed after frequent air-bleeding, and if I have to go to the trouble of finding and buying a slotted screwdriver with an exact groove width and length, I want to change to one that can bleed pressure with just one push. I have been thinking about this for a long time.
I saw on the compatibility chart that SEA BASS cars are RMZSeries compatible and DRZ400sm is not listed, but when I looked at the review, I saw that some people had installed it on DRZ400sm, so I bought it.
The installation itself only takes a few minutes to remove and replace the pure Normal Thread Screw.
The product description says at 1Nm, but Torque management is impossible because there is no place to hit or grab even Spanner or Pliers to begin with, let alone Torque wrench.
Turning directly between pliers, etc. will 100% scratch and peel the paint.
Therefore, it is necessary to use a thin rubber sheetetc. between the sheets to tighten them.
I think it will loosen due to vibration, etc., if it is just tightened with fingers. (1Nm is equivalent to lightly tightening the pliers, so I guess it is the same.) I felt that a periodic looseness check would be a good idea.
Silicon grease on O-ring as per Instruction Manual (Wu's) I applied a thin layer of "L" to the assembly, but I wonder if this could also be a factor in the loosening. I think this may also be a factor in the loosening, but ….
Pressure relief is basically the same as before:push with the front up and free.
If you do not front up, you must at least keep the vehicle body horizontal and vertical to get the quantity.:Pair (for Left and Right) Note that the pressureBalance of the
I think the price is a little high, but that's okay because there is nothing else out there.
It also gives a bit of a custom feel, even though no one will easily see or notice it.
As is often the case with ZETA products, I expect the anodized color to fade quickly, so I'm willing to let that go as long as the necessary functions are working properly.
View detail
![VXSeriesChain 520VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_G&G_P.jpg)
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Good!
Oh! It is exquisite, but I can feel that the driving performance has improved.
He's a definite guy, that's for sure.
It was a change from Normal chain, but I think it became easier to run.
Personal Thoughts.
View detail

Fits: HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750
Genuine Honda Right Exhaust Band for VFR800 2003
After receiving the other parts for the VFR800 2003 project bike in my garage. I have forgotten one of the 2 exhaust clamps. The old clamp was not doing it's job as it should, I went for the replacement instead of trying to patch something up. I highly recommend using genuine Honda clamps as it just makes sense. I found the correct part number by using the tools provided by Webike to link to the manufacturers website. Easy. As this was part of a larger order with many parts, the shipping worked out to be brilliant and better value than you would imagine. This cut down the cost of shipping by quite a lot. EMS express shipping was used this time and delivered within 5 days from order. All was packed neatly inside the sealed box. Yes, Webike sealed the box with tape so nothing could get lost or fall out during transit. Webike also filled any empty spaces in the outer box with additional bubble wrap so nothing could get damaged in transit. Even the small parts like this one arrived in perfect 100% condition. This clamp is very well made and the materials used are really top quality and robust. The clamp is also coated in a lovely chrome finish which really adds to the quality. The exhaust clamp is perfect and just what was needed to help move along the project. Very pleased with the result. Thank you Webike. Great service and will be back View detail

Fits: HONDA CR125R, HONDA CR250R, KAWASAKI KX125, KAWASAKI KX250, SUZUKI RM125, SUZUKI RM250, HUSQVARNA TE300, YAMAHA YZ85, YAMAHA YZ80, HONDA CRF125F, HONDA CRF125F, KTM 65SX, KTM 50SX, SUZUKI DRZ400SM, SUZUKI DRZ400S, SUZUKI RMZ450, SUZUKI RMZ250, KAWASAKI KDX250SR, KAWASAKI KDX220, KAWASAKI KDX200
TM Racing will not get a GeCOTAGrip without it!
ODI's Lock on grip comes with 5 types of Cam for Throttle, but as expected, TM is too niche or not compatible with the included Cam.
I came across this because I happened to find the notation \"Use TypeA\" on an overseas Site.
If you want to put lock on grip on TM, use this!
View detail

Fits: HONDA CB1100, HONDA CB1100N, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D2

สินค้าแท้วัสดุแข็งแรงชุบมาดีไม่เป็นสนิม View detail

Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000

ขนาดรูพอดีใส่ง่ายไม่แน่นจนเกินไปถูกใจมากๆ View detail

Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000

รัดท่อยางได้แน่นดีป้องกันการรั่วของน้ำมันได้โอเคเลย View detail

Fits: HONDA CRF250R, HONDA CRF250R, HONDA CRF450L, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F
Genuine Honda Plug Pin for CBR250R 2016
A few parts needed replacing on this bike due to corrosion of bad salty weather. This plug pin and the actual hanger pin were not great. We decided to just get both of the parts and replace as just replacing one was a little silly. The plug pin was not hard to find as I had Honda schematics to check on. After finding the 2 parts needed on Webike website, I ordered these along with a couple of other bits. This saved on shipping and also meant that all the parts I needed, would arrive at the same time. This allows me to get on with the jobs together instead of having to wait for another shipment. The plug pin arrived and was inside a bubble wrap envelope that Webike warehouse had made. This kept both the plug pin and the hanger pin together for safety and so they would not get lost. The plug pin is essentially a grub screw which protect the hanger pin head from getting messed up. Unfortunately, someone had this plug pin out before and had not seated it correctly which meant salt and other road debris had made it's way inside. These things happen. The plug pin is well machined and even though it is a tiny part, Honda took the time to make it right. It went straight into the hanger pin with no fuss and now I am confident that this is protected going forward. Thanks you Webike. View detail

Fits: KAWASAKI KX250F, KAWASAKI KX250F, KAWASAKI KLX450R 2017, KAWASAKI KLX450R 2008, KAWASAKI KLX300 1998, KAWASAKI KLX300 1997, KAWASAKI KLX300 1996, KAWASAKI KDX250SR, KAWASAKI KDX250SR, KAWASAKI KDX220R (for competition) 1996, KAWASAKI KDX200SR, KAWASAKI KDX200SR, KAWASAKI KDX200SR, KAWASAKI KDX200SR, HONDA CRF450R 2018, HUSQVARNA TX125 2017, HONDA CRF450R 2017, HONDA CRF450R 2016, HONDA CRF250X, HONDA CRF250X
I continue to purchase!
I continue to purchase.
OffRoad course, forest roads, etc. can be driven with ease.
It is a good cosmetic product.
View detail

Fits: KAWASAKI KX250F, KAWASAKI KX250F, KAWASAKI KLX450R 2017, KAWASAKI KLX450R 2008, KAWASAKI KLX300 1998, KAWASAKI KLX300 1997, KAWASAKI KLX300 1996, KAWASAKI KDX250SR, KAWASAKI KDX250SR, KAWASAKI KDX220R (for competition) 1996, KAWASAKI KDX200SR, KAWASAKI KDX200SR, KAWASAKI KDX200SR, KAWASAKI KDX200SR, HONDA CRF450R 2018, HUSQVARNA TX125 2017, HONDA CRF450R 2017, HONDA CRF450R 2016, HONDA CRF250X, HONDA CRF250X
You can drive with peace of mind!
It can be used with no problem even if the air pressure is lowered during the OffRoad course.
Good product
View detail

Fits: HONDA CRF250M, HONDA CR125R, HONDA CR250R, HONDA CRF250RALLY, HONDA CRF250X, HONDA CRF450L, HONDA XL750 TRANSALP, HONDA CRF150R, HONDA CRF250R, HONDA CRF450R, HONDA CRF250RX, HONDA CRF450RX, HONDA CRF450X, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
Step Large thing
Installed parts little by little for driving on forest roads.
Installation The feeling of sitting on the bike is clearly more relaxed than the normal one.
Is the pin having a nice effect too?
I don't think you'll go off your feet even if you're using the stock system, but it will give you a greater sense of security.
Installation requires only a little force to insert the shaft pin.
I'm looking forward to running it.
View detail

Fits: KAWASAKI KX250F, KAWASAKI KX250F, KAWASAKI KLX450R 2017, KAWASAKI KLX450R 2008, KAWASAKI KLX300 1998, KAWASAKI KLX300 1997, KAWASAKI KLX300 1996, KAWASAKI KDX250SR, KAWASAKI KDX250SR, KAWASAKI KDX220R (for competition) 1996, KAWASAKI KDX200SR, KAWASAKI KDX200SR, KAWASAKI KDX200SR, KAWASAKI KDX200SR, HONDA CRF450R 2018, HUSQVARNA TX125 2017, HONDA CRF450R 2017, HONDA CRF450R 2016, HONDA CRF250X, HONDA CRF250X
Is it safe if I put it on?
I installed it with Timing with Bead stopper because I heard that it is safer to have it for driving on forest roads! It is much thicker than a regular tube and is much more solid. I think it is better to install it because it is thicker so it is hard to bite into. I don't feel any discomfort at all when driving after installation. View detail
![TOURANCE NEXT 2 Tire [90/90 - 21 M/C 54V TL]](https://img.webike-cdn.net/catalogue/images/105774/mainimage_992x992_TS.jpg)
Fits: TRIUMPH TIGER 900 RALLY, KTM 350EXC-F SIXDAYS, KTM 500EXC-F SIXDAYS, KTM FREERIDE 250R, KTM FREERIDE 350, KTM 1190 ADVENTURE R, KTM 250EXC SIXDAYS, KAWASAKI KLR650, HUSQVARNA FE501, KAWASAKI KLE400, KAWASAKI KLE400, KAWASAKI KLE400, KAWASAKI KLE400, TRIUMPH SCRAMBLER 1200 XE, TRIUMPH SCRAMBLER 1200 XC, TRIUMPH TIGER 900 BOND EDITION, HUSQVARNA NORDEN 901, KAWASAKI KL600R, HUSQVARNA TE150, TRIUMPH SCRAMBLER 1200 XE
It is thin but grips well.
[How is it used?
I use it for Touring, Winding and commuting.
Was the one you received as per Image?
As per Image, Parenthesis is quite good.
Was the installation difficult?
I don't know since I asked an acquaintance, but I assume it is the same as a regular Tube tire.
How was your experience with it?
Highway cruising and Winding are very comfortable.
If it were a light Dirt, such as a general road or parking lot, there would be no problem.
Noise when driving seems to have decreased slightly.
[Included Parts:were they on?
None
View detail

Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Always I am indebted
As long as you have Kashimaru-kun, you can finish the Chain exchange in a jiffy!
This time, it was Piece stuffing with Sprocket change, so I also did Cut.
Takes about 30 minutes
Kashimaru-kun is a little expensive, but I recommend it because you can easily do the Chain replacement work at home.
View detail

Fits: HONDA CRF150R, HONDA CRF150R, HONDA CRF150RB, HONDA CRF150RB, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250R, HONDA CRF250RX, HONDA CRF250RX, HONDA CRF450L, HONDA PCX150, HONDA PCX150, HONDA CB1000R, HONDA CB1000R, HONDA CB1100, HONDA CB1100, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX
For Overhaul
For CaliperOverhaul, OEM Product, works great, no problems. View detail

Fits: HONDA CR125R, HONDA CR250R, HONDA CRF150F, HONDA CRF230F, HONDA CRF450L, HONDA SL230, HONDA XR230, HONDA XR250, HONDA XR250BAJA, HONDA XR250MOTARD, HONDA XR250R, HONDA XR400R, HONDA XR650R, HONDA CRF250F, HONDA CRF250R, HONDA CRF250RX, HONDA CRF250X, HONDA CRF450R, HONDA CRF450RX, HONDA CRF450X
It hasn't arrived yet.
What kind of an intellect would ask me to write an Impression when it hasn't even arrived due to a delivery error? You should be more careful about making fun of me! View detail

Fits: HONDA CBR1000RA 2A, HONDA CBR1000RA 2A/A, HONDA CBR1000RA 2AC, HONDA CBR1000RA 2AC, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RA AC/A
Universal30mmSeal kit
The Caliper on my Ninja 1000 has a 32mm and 30mm dissimilar diameter Piston.
I wanted to change to Piston by Kashima Coat and went OH.
At that time, he purchased this product from Universal.
Caliper is made by Tokico, but I used Nisshin.
32mmPiston HondaOEM 45117-MBW-E11
32mmSeal Nisshin 2A2-010
30mmPiston HondaOEM 45117-MCJ-006
30mmSeal Nisshin 2A2-004
I was worried about whether it would fit until I tried it on, but it fit without any problems.
Brake fluid was applied to the seals and RubberGrease to the pistons.
The Piston fits into the Caliper and I am very satisfied with the Large.
And it was cheaper than OEM.
View detail

Fits: BETA RR 125 2T, BETA RR 125 2T Racing, BETA RR 200 2T, BETA RR 250 2T, BETA RR 250 2T Racing, BETA RR 300 2T, BETA RR 300 2T Racing, BETA RR 350 4T, BETA RR 350 4T EFI, BETA RR 350 4T Factory, BETA RR 350 4T Racing, BETA RR 390 4T, BETA RR 390 4T Racing, BETA RR 400 4T, BETA RR 400 4T Racing, BETA RR 430 4T, BETA RR 430 4T Racing, BETA RR 450 4T, BETA RR 450 4T Racing, BETA RR 450 4T Racing
Reliable Moto master!
Moto master products, which I have been using for brake disc rotors and other products, have excellent durability, so I can ride my motorcycle with peace of mind. The hybrid aluminum and steel bike I bought this time is light and feels good. View detail

Fits: HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000, HONDA CRF1000
Genuine Honda Mini Fuse
I was totally out of stock of some generic Honda mini fuses and wanted to get some for spares. I ended up just buying from Webike as they are the best place for genuine Honda spares that I know of. Besides, I was already purchasing a few parts for various bikes so it made sense to order these too. Finding the right mini fuses was easy enough as I already had a bike in the garage that needed some, so I just searched Honda schematics of that model of bike. Webike price was really good value and as I was already ordering parts, the price for the shipping was already covered for the parts I had. EMS is my favourite courier right now as they deliver very fast. In just 5 days from being shipped the order arrived. All was expertly packaged and even these tiny mini fuses were well packaged within a bubble wrap envelope. All the fuses were perfect, you can see if one is broken just by sight and all were fine. Not a great deal of cost to these but they do deliver great performance. The quality is not in question as they are Honda OEM parts at the end of the day, Very pleased and will be back View detail