Reviews
Fits: KAWASAKI Ninja1000 SX, KAWASAKI Ninja1000, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA FAZER8, YAMAHA MT-03, YAMAHA FZ8, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA XSR700, YAMAHA MT-07, YAMAHA XSR900, YAMAHA XSR900 GT, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-10
Ideal for One Point
It is inexpensive and takes only a few minutes to install, but it is an excellent one point option because of its rather large impact on the appearance. View detail
Fits: KAWASAKI ZX4R SE, KAWASAKI ZX4R, KAWASAKI ZX4RR, KAWASAKI ZX25R
Magical Racing Carbon Trim Windshield
Item received.packing was good.it took a longer time for the item to be ready but worth the wait.overall built quality is superb.notting can go wrong with Magical Racing.thank you Team Webike making all this happen.highly recommend to shop at Webike. View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
Exactly's Largeiki
Z900RS CAFE has a 2L Large size Exactly.
The fastener at the back is large and easy to put on and take off, and it is convenient because you can easily see the front and back.
View detail
Babyface Racing hook
I removed the Tandem Footpeg because I installed the Exhaust Bracket and Single seat cover. I installed the Tandem Footpeg for the purpose of complete reflection because it was lonely to see.
It is a Babyface product and is well made.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
MORIWAKIFrame Hole Plug
I honestly think 6600 is expensive, but I think it's reasonable when you look at the make.
I think Chinese products would be fine since they are not functional parts, but there is no color that matches the Silver Frame on the 40anniversary car. moriwaki matches the color on the ZX4RR40anniversary car.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI , KAWASAKI Z650RS, KAWASAKI Ninja400, KAWASAKI Ninja250R, KAWASAKI ZRX1200DAEG, KAWASAKI Z900RS, KAWASAKI Z1000, KAWASAKI Ninja1000, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
Quite Limit
I installed this on a 2019 ZX10RSE. It is a Lever Guard so there is very little weight. The weight is very low because of the lever guard, but I feel the vibration a lot because I had Posh UltraBabyBar End before. View detail
Fits: KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE
best recommended?
The black part is probably aluminum, not resin. zx25r has been completely replaced from the root, and the construction is Large and solid/firmly. (Easy to install) If I had to replace it again, I would probably choose this one. View detail
Fits: YAMAHA TRACER9 GT, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100BLACK STYLE, HONDA CB1100, HONDA CB400SF, HONDA CB400SB, HONDA VTR1000SP-1, YAMAHA FAZER8, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CB1100, HONDA CB1100 typeII, HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000
Both security and performance
I replaced the OEMPad and am Large satisfied!
From the moment you hold the Brake lever \"Swoosh.\" The harder you grip the brake, the more firmly the braking force increases.
Deceleration from high speed is stable and very easy to Control. It is also cosmetically pleasing, and I have high expectations for its durability.
View detail
Fits: KAWASAKI Ninja ZX-4RR KRT EDITION, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-4RR KRT EDITION, KAWASAKI Ninja ZX-4RR 40t Anniversary Edition, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4RR KRT EDITION
Original seat cowl that fit and match the bike
Original Kawasaki accessory for the 2024 ZX4RR. Perfect fit and color matching to the bike color.instruction provided for ease of installation View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA XJR400RII, YAMAHA DIVERSION, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJ400ZE, YAMAHA XJR400, YAMAHA XJ400Z, YAMAHA XJ400ZS, YAMAHA XJ400D, YAMAHA XJ400S, YAMAHA XJ400, YAMAHA SR400, YAMAHA FZR400RR-SP, YAMAHA FZR400RR, YAMAHA FZR400, YAMAHA FZR400R, YAMAHA FZR400
Motorcycle Cover
I bought this as a Cover for my XSR900 RN80J.
In my case, I keep my motorcycle in a warehouse and use the Cover not for rain and wind but for dust and small animals, so this is enough.
The size feels a little too Exactly and I would have preferred it to be a little looser.
Unfortunately, I have purchased and used another Size before, and there is a lint-like substance left on the inside of the Motorcycle, and when I put the Seat on and remove it, the lint gets on the Motorcycle. I would like to see something done about this.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR
Effectiveness beyond design and appearance
The reason for purchasing this product was to prepare for future contingencies due to the deterioration of rubber parts.
I bought it to prepare for the heat-whitening and unseen dangers, and I hope it will help me to keep my car for a long time.
View detail
Fits: KAWASAKI Z900SE, KAWASAKI Z900RS, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR KRT EDITION, KAWASAKI ZX-25R
It looks nice.
I have a ZX4-RR (about 2000Km), and I bought a JTrip STAND (JT-127VRD) and some others to replace the OEMSprocket with this Sprocket because the OEMSprocket is not good looking.
Since the number of pins is the same as the OEM, the Speed is the same, but it looks cooler, but it was not that noticeable unless the Chain was also replaced.
Sprocket fixing screw is Titanium Alloy Gold M10 Pitch 1.25mm Black Quantity:1 Set of 6pcs. (very low price)
After tightening with 59Nm and applying Screw lock, marking was done with Paint marker.
■Points of work
First of all, the nut of the rear axle shaft (24mm on the opposite side) was too tight for the large size and would not move with only a slightly longer 9.5mm chet, so we managed to remove it by inserting a 30cm Extension Pipe. (Tightening torque is 98Nm).
The brake caliper also interfered with the removal of the tire, so I removed the caliper's fixing bolt (M8, 12mm on the opposite side), which was also hard enough for the large screw lock. (I felt like I was going to break the caliper.)
The assembly went smoothly without any problem, and when I tightened the fixing bolt of this Caliper (M8, 12mm on the opposite side) with the Chinese Ratchet (which can be tightened up to 220Nm) of 12.7, it tightened more and more, but I thought something was wrong on the way and tightened it once more. I took it off and tightened it again carefully, but the Ratchet did not say "Snap" and when I tightened it slowly, the screw snapped.
The broken screw was stuck in the Caliper support and I was going to take it home and drill a hole in it with a drill and rescue it with an extractor, but the bolt seemed to be burnt and I couldn't drill it at all with the steel drill I had at home, so I used a Cobalt Heiss steel end mill to drill the hole. I made the hole with a Cobalt Heiss steel End Mill, bought a Gekko Drill with a 4mm blade that was rumored to be sharp, made the hole quickly, took out the broken screw, ordered the broken bolt, and finally installed it the next week.
Incidentally, the Caliper support is no longer in stock at the manufacturer and delivery is said to be 3 months. (It is a common part with 25R.)
I thought maybe other people were folding Screw well.
I thought it would be better to be careful when tightening the fixed bolt (M8, 12mm on the opposite side) of the rear caliper with a regular Wrench, because it feels soft and can be easily tightened to any extent.
From the feel of the break, this Screw seemed to be good for tightening at 20Nm. (still didn't feel right)
View detail
![Compact Half Cover [Medium]](https://img.webike-cdn.net/catalogue/images/91554/22133_TS.jpg)
Fits: その他 , YAMAHA MT-09, YAMAHA NMAX, HONDA XR50Motard, HONDA NSRMini, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GS125 KATANA, SUZUKI GN125E, SUZUKI RGV250γ SP, SUZUKI Gixxer 150., KAWASAKI Z250FT, SUZUKI RGV250γ-SPII, SUZUKI RGV250γ-SP, SUZUKI RGV250γ, SUZUKI RGV250γ, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI NZ250S
It can be used quickly and easily at touring destinations.
It can also be used in case of sudden rain while on the road.
Compact and portable.
View detail
![[TYPE-GP1S Rear] Aluminum Forged Wheel](https://img.webike-cdn.net/catalogue/images/73019/gp1s_03_TS.jpg)
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-4RR, KAWASAKI ZX-4RR SE
Galespeed GP1S Wheels on my 2024 ZX4RR
The GP1S wheels are a PERFRCT fit on the 40th anniversary ZX4RR. 350/17 ip front and 550/17 in the rear. Absolutely LOVE the look. Super light weight wheel. Very nicely made. View detail
Fits: TRIUMPH STREET TRIPLE, TRIUMPH SPEED TRIPLE S, DUCATI M400S, MV AGUSTA BRUTALE750S, DUCATI M400METALLIC, DUCATI M400DARK, DUCATI M400DARK, DUCATI M400, DUCATI M400, DUCATI M400, DUCATI M620S, DUCATI M600, DUCATI M620, DUCATI 620SPORT, DUCATI MONSTER696, DUCATI M750, DUCATI M750, DUCATI SS750, DUCATI 750SS, DUCATI SS750
I buy regularly.
I buy it regularly because I get tears around the Mirror and Tandem seat area after about 2 years.
In winter, static electricity tends to occur and crackles when putting on and taking off.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR
Looks good, windproof effect is disappointing
Looks great, the Cockpit is great with more Cockpit.
However, after replacing it, I drove on the highway and looked at it.
I feel that there is no difference in windproof effect between NORMAL and LARGE.
I'm short. (160-160 early) It may be from the
For those who want to emphasize the windproof effect, the taller Screen is more suitable.
I think you will be satisfied.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R
Cospar good
I had to cut off the OEM Slider by SlipDown on my Circuit. I replaced it with Babyface's Slider. The shape and material is much more cost-effective and effective than the other brands.
The OEM type was installed by attaching a special bracket to the frame, but the shape of the body that engages when the frame is slipped down was distorted. This product is a type that replaces the entire Engine Mounting Bolt, so there are no unnecessary parts, and the rigidity of the product is very solid, so it gives a different sense of security. The quality of the product is high and I am very glad to have installed it. I recommend this product. When installing this product, you will need a jack to lift up the STAND and the engine from the bottom in order to remove the Engine Mounting Bolt. You will also need a torque wrench. If you are unsure about the installation, leave it to the store.
View detail
Fits: KAWASAKI Ninja ZX-4RR
Looks good for SSMotorcycle.
After the break-in period was over, I started to notice a slippery feeling around the tank when I slowed down or took a corner. I was concerned about the slippery feeling around the tank when decelerating or cornering, and I decided to use EasyGrip. I decided to use transparent grips because they do not match with BlackGrip.
The Corner allows the rider to feel one knee tucking into the body of the vehicle. On the other hand, it is not sticky, so there is a sense of freedom.
View detail
Fits: KAWASAKI Ninja650, KAWASAKI Ninja250, KAWASAKI Z250, KAWASAKI Ninja400, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI V-STROM250SX, SUZUKI V-Strom250, SUZUKI GSX250R, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4R SE, KAWASAKI Z400, KAWASAKI Ninja ZX-25R, KAWASAKI Z650RS
This is a must for the Z650RSRear Stand.
Easier to use than KawasakiOEMP Racket because it has fewer parts.
I think there is some confusion on the order of installation on Bolt because there is no Instruction Manual.
Parts that are generally removed after maintenance is completed.
It needs a place to put it and a container.
Sometimes I see people running with parts attached. Screw lock." etc. to fix it firmly in place.
It is easily dislodged by vibration. Be careful because it is dangerous.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, KAWASAKI Ninja ZX-6R, KAWASAKI ELIMINATOR, KAWASAKI Z650RS, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja250, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Ninja400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Ninja ZX-4RR
Just as I expected
YOSHIMURA is a first-class manufacturer and we trust their quality and have no complaints. Also, unlike other manufacturers, this product is only for Brake Side. (Clutch Side is not for sale) So don't worry. View detail