Reviews
Speaking of CRF, this Exhaust System
Speaking of CRF!
It is easier to ride because I no longer feel like stalling at low speeds in first and second gear.
I don't know if it was only the effect of the Exhaust System, since I changed the Silencer at the same time, but it was good anyway.
View detail
Bigli in sound
[How is it used?
Touring Main
Was the one you received as per Image?
It was bigger than I thought it would be.
Was the installation difficult?
I left it to the Shop to take care of it while I got it fixed.
How was your experience with it?
It's just so nice. It is not too loud, but not too quiet either. It is a wonderful exhaust system that gives off a nice pulse.
[Included Parts:were they on?
With Sticker by SP Tadao. Where should I put it?
[Was there anything that disappointed you?
None !!!!
View detail
Maybe it works.
[How is it used?
Touring Main.
Was the one you received as per Image?
Street Image
Was the installation difficult?
Leave it to Shop while you repair it!
How was your experience with it?
I feel that the Motorcycle has become much more honest. I don't feel a drastic change, but I feel that the power increases smoothly with less jitteriness at low rpm. (Lol) I'm not sure if the Torque is higher than it was in NORMAL or not. But obviously the Torque is higher than in NORMAL, and the Speed goes out in a similar RPM range, so if you don't weigh yourself, you might get Large weird.
[Included Parts:were they on?
Sticker by SP Tadao, instruction manual,
[Was there anything that disappointed you?
None !!!!
View detail
Apparently not.
The product was installed by a Motorcycle shop during the initial inspection.
The effect is clearly an increase in low and mid speed Torque, and a sharper Response when the Axel is opened.
The driver can go to the sixth gear when he used to have to drop to the fifth gear.
I had no idea Pipe could make such a difference. The price is reasonable and this is a great buy.
View detail
Ease of handling up!
The motivation for purchasing 19MRALLY50 was Ann Label's
I wanted a RALLY50TrekExhaust System, so I replaced it right away.
Normal muffler is not very impressive, but it has been around for 2 years.
I got on and started driving in the woods from time to time, and the low RPMs were not too much.
I installed PowerBox because it is not Smooth
I can't get rid of the Down Type Exhaust System, though.
Replaced PowerBoxPipe+Normal muffler
My first impression is that, as expected, low RPMs are now available.
Long our GEAR ratio (15-39) I've been working on it for a while now.
It was jerky and unusable below 4000 rpm, but after the replacement
It can be used at 3000 rpm for light loads and when Axel is opened.
The feeling of moving forward has increased.
From there, it will turn to Flat until 8000 rpm, so
There's no sense of excitement, but I get the impression it runs on Torque.
Conversely, the RALLY50TrekExhaust System is a low RPM Torque
Moderate and loose, good extension from 6000 rpm.
It was fun to turn it because it felt like
The sound is OEM exhaust system, but the bass is strong and crisp.
It's comfortable even in NORMAL.
Naturally, it's not noisy and you can run peacefully and mentally.
It was fun to run at a leisurely pace (lol).
Well, it's also a commuter car, so I'm happy with the practicality of it.
Pipe replacement is a Motoskill Crash Bar.
It is not possible to install it with the ring of wisdom when it is still on….
I had to Rose them all, so that was the only hassle.
View detail
Response to acceleration when opening low-speed Torque Increase Large and Axel is improved.
No special skills are required for installation.
Exhaust pipeGasket is not reusable and must be purchased separately.
As for the feeling, compared to the OEM, the increase in low-speed Torque, the extension at startup, and the extension of acceleration from 6th gear are clearly better.
In the OEM condition, the car would not accelerate out of 6th gear unless the Axel was turned quite a bit, but after the replacement, this is no longer the case and the car is stress-free.
It is not too hard to cruise at 70 km/h and can keep up with the flow of traffic on the highway.
I would recommend purchasing this product, and I think it is the custom parts that you can feel the most difference from OEM.
View detail
Fits: YAMAHA MT-07, YAMAHA XSR700, YAMAHA YZF-R7
2023.Since November, YZF-R7 (YZF690) The system is also compatible with the
Purchased at the Yahoo! Shopping store.
At the time of writing this impre,
The only information I have is on the development blog of the producer, SP Tadao,
In fact, this Exhaust System will be available for the YZF-R7 from November 2023 production.
I tried to install the previous production and could not fit the Cowl,
Spec. has been changed so that they can be installed.
Since it is officially certified as a compatible vehicle model, the Gas Repo documentation is of course included.
First, regarding installation,
Although it adds the time and effort of detaching and attaching Cowl,
I think it is generally the same as the installation on MT-07 and XSR700.
Accuracy is not a problem, though the shape is very OEM-like with a so-called lunch box,
Clearance, etc. were no problem, and it all fit together smoothly.
Flange bolts are often a problem when installing an Exhaust System for Motorcycle,
In this R7, after removing the Radiator Bolt and floating it,
By removing the Radiator fan and staggering it inward,
I was able to get Space to use Torque wrench without any problems.
Clearance with the bottom squeezed Cowl section is also fine, as shown in the photo.
Insulation Sticker for R7 is also included.
Next, let's look at sound quality.
I think the MAJOR ones for R7 are around AXIS Lapo and Over.
I have only seen these Exhaust Systems on Youtube videos,
I have never actually heard of it,
My personal impression is that AXIS Lapo Vine, vween." The sound of the Gold genus quality is Main.
Over. Vloroong, vloroong." And so on
I feel that the sound quality is like a Normal muffler sound with a burst of sound that adds power to the sound.
However, the actual impression of the Exhaust System installed this time was also different from the video I saw on Youtube,
The above impression may differ from the actual situation.
Actually, this is my impression after listening to the actual product,
The sound quality is different from the above two types, perhaps due to the special shape.
The sound quality is more bass-like than the AXIS Lapo, which seems to have cut the low frequencies, but it has an over-like bass,
The sound quality is more bass-oriented than that of the Over, or rather, the sound quality is like a high-cut version of the Over sound.
When you turn it, it is as if there is no Gold genus quality, it is as if it is crawling on the ground. "Von, von." It sounded like "I'm sorry,
I used to drive a Panigale before,
It sounded like a sensible (?) version of Ale's Normal muffler. I felt it sounded like a sensible (?) version of the Normal muffler.
After all, the current car has Corresponding Exhaust and the sound of the engine itself is too different from that of Panigale,
It is not the same, but it is pleasant for those who like that kind of sound! It may be.
In fact, there is also an exhaust port under the Exhaust System, which reflects the sound to the ground, which probably helps.
Finally, there is the all-important performance aspect.
Frankly, it is a waste of time for Gold to think about things like the most Large output in today's car inspection Corresponding Exhaust.
Furthermore, the Exhaust System was not developed with this as the primary focus,
I didn't get the impression that Top End's power was increased or anything like that,
I felt a definite improvement in the driverability around the mid-speed range, which is what I was aiming for.
And even if I skipped Shift more than usual, it was easier to just flow with Axel,
That Torque fully turned mid-speed coupled with that sound of how it feels like it is accelerating in Torque,
The Corner is very comfortable to use! It's a great feeling!
I don't think this is for Circuit people, for example,
If you are a public road person, I think you will be into this characteristic.
Recently, the price of motorcycle exhaust systems has been increasing,
And yet, with stricter regulations, we think about it for the purpose of improving performance,
It has become a cosmetic PARTS by any stretch of the imagination,
I had been holding off on replacing it, but it was worth it to see how it went.
View detail
Fits: YAMAHA MT-07, YAMAHA XSR700, YAMAHA YZF-R7
Good. ??
It is as if I bought XSR700 because I fell in love with this sound.
The sound was so loud that it would disturb the neighbors if you didn't blare it.
I don't think there are any.
It doesn't make a loud noise even if the rpm is increased.
Torque has gone up! But not dramatically.
I've read on the Net that the Engine Displacement Volume has gone up...
Hmm
View detail
You can feel the effect.
[How is it used?
Use with Normal silencer
Was the installation difficult?
There is no particularly difficult process, but there are two points that are tricky
■ Silencer side is sticking and hard to remove when removing OEM Product
I sprayed it with WAKO’S Raspene and left it for a while, then pulled it out!
■ Removal of Gasket on Engine side
For the uninitiated, it is difficult to distinguish Gasket from Engine, which is assimilated into
Where to dust? I didn't know! Only that I didn't!
How was your experience with it?
Torque output smoothed out.
Overall, Torque is thicker.
I was able to go up the Smallest hill in 3rd gear without any hesitation.
6th gear feels like 5th gear so far, and I often try to SHIFT UP one more gear even though there is no more upper GEAR!
Generally, one GEAR above is now sufficient.
[Was there anything that disappointed you?
None
Items to buy together:.
Engine side Gasket
Silencer side Liquid Gasket
View detail
Standard easy Torque up
[How is it used?
For all driving from commuting to touring
Was the one you received as per Image?
The item is exactly what I expected. Do some people care about color change after welding?
Was the installation difficult?
Installed on OEMSilencer.
The Silencer plug is tight, so it is quite tight.
On the other hand, I wonder if Large is strong enough without liquid Gas.
This time I painted it because I had it ready.
The Gasket on the Engine side is quite a crushing type, so you should be careful not to put a Wound on the port of the Engine when you remove it.
How was your experience with it?
The sound, of course, remains the same.
I will experience how good it feels from now on.
[Included Parts:were they on?
No problem. It would be better if the size of the Torque of the included Screw was the same as the OEM one, so that I don't have to change tools.
[Was there anything that disappointed you?
Since it is a popular item, waiting time is not an option!
View detail
highly recommended
It's been about two months since I replaced it with PowerBox, so good and bad points.
The first good thing is that it is so much easier to climb hills, with the OEM I was limited to 3rd gear, but with the PowerBox I can climb the GunGun in 4th gear and sometimes in 5th.
Torque has increased and so has power. The start of driving has changed a lot, and it feels so good in a straight line that you can't help but scream.
I don't think we can go back to OEM.
The stainless steel is sexy, and I can't help but grin when I see it reflected in the setting sun.
The only bad thing is that the fuel consumption is a little lower.
Is it any wonder that PowerBox has "expansion chambers"?
But I don't mind that much because Merit is Large.
Also, I used Stainless Steel, so I am sure it will burn.
I polish it once a week with Yo ShimLASTANCleaner, but eventually it burns again, so I don't have a Drill w
Back is also available, so those who have trouble with maintenance, etc., should buy that one.
I really recommend this product.
View detail
Customization of CRF250L in 2023
The 5th to 6th gears are quite far apart and there was some rattling, but after installing this PowerBox, I was able to smoothly SHIFT UP.
The OEM exhaust pipe is Black Matte, but this one is Polished Stainless Steel, shining and very parenthesis.
The installation process took about two hours of worrying.
Especially, the exhaust pipe joint of the engine was too thin, and I thought that I could not insert the bracket enough because I thought it would go all the way to the base of the bracket, but when I looked at another sp Tadao's site, there is about 8mm gap, so the metal gasket must have been squashed inside and it looks good. I thought it was not enough to insert.
The silencer part of the Exhaust System does not go in deep enough, so I felt it was necessary to apply liquid Gasket firmly and put it in little by little to get a Large cut.
View detail
Parts that can be liked or disliked
Used for 2023MODEL8BL and Exhaust System is SC.
Rucksack is now more like a parallel twin than a VTWIN.
Torque is Fee Ring aligned from Large grains to Small grains.
If you like the sloppy, sticky feeling of OEM, it might be a little hard.
And the exhaust noise is a little quieter.
It also makes a lot of noise on the front bank side.
But it is clearly Torque out from 3500~.
The speed ride is clearly faster.
Driving in the partial range is also quite easy,
Control at very low speeds is also improved.
Tadao indeed! I like it.
View detail
Torque feeling, Exhaust System sound, great!
Installation was very easy. Please try DIY installation. View detail
Proven effectiveness
This is IMPRESSION installed on a 2022, after exhaust Gas regulation MODEL.
[How is it used?
Winding driving is Main.
Was the one you received as per Image?
The weld marks in the middle of the Pipe are full of custom feeling, and it is a little longer than NORMAL, but once it is burned to brown, it does not look strange.
Was the installation difficult?
Use Torque wrench and OEM new Gasket for Engine side and Exhaust pipe assembly. Torque wrench should be used, and OEM new Gasket for Engine side and Exhaust pipe assembly should be prepared.
How was your experience with it?
The Torque above 4500 RPM is increased to a Large range, just like a lie. The Image plunges into the high RPM range at once, and it makes me want to open the Axel, because it feels so good.
○○ Embracing is more gradual, so it is easier to drive Winding.
Exhaust noise is a bit... [Color] I think it has changed to a Clear look, but I can no longer tell….
[Included Parts:were they on?
InstallationInstruction Manual and one Sticker.
[Was there anything that disappointed you?
The paint on the surface is thin and the surface has been chipped by stepping stones.
【Review】
I was skeptical that an exhaust pipe would make a difference. I was skeptical, but it did. I don't like to change the appearance of my car, so I am satisfied.
View detail
Fits: YAMAHA MT-09 SP, YAMAHA XSR900, YAMAHA MT-09, YAMAHA TRACER9GT, YAMAHA TRACER9GT+
Are there individual differences?
Exhaust leakage from the Exhaust System joints would not stop even with the use of liquid Gasketetc. After all, the EngineCheckLamp came on, so I returned to OEM. It was an expensive social learning experience. View detail
Become a different Motorcycle
I thought it was just an exhaust pipe, so I replaced it with a silencer and was surprised!
The Engine Taste is completely different. Of course, the sound is also better.
Large change recommended.
View detail
Torque in the low RPM range has increased.
I got the impression that the power band from around 6000 rpm gently spread down to the bottom.
I can start off in 2nd gear without difficulty and can drive at Idling RPMs without knocking. Intersections and UTurns are much easier.
If the reduction ratio is set closer to Torque, it will be even easier to ride.
The volume is not that loud, so it seems to avoid neighborhood troublemakers.
View detail
Fits: YAMAHA TRACER900, YAMAHA TRACER900
Spec. change from Earls Gear
I changed it by changing the Spec. from Earls GearFull Exhaust System.
The volume is adequate since both are Japanese Vehicle Inspection Correspondence.
The motivating feeling when you turn it starts with the middle rotation lol.
As others and the Manufacturer have said, it is very easy to open when turned in AMODE, and as a result, the Speed is higher than I expected.
Overall, I am satisfied, but there is a vibration when cruising at 120 km/h in 6th gear. Also, if a small stone gets into the exhaust system outlet, the drain hole will be clogged, so it is necessary to check and remove small stones frequently.
View detail
Exhaust pipe replacement only
Exhaust pipe paint peeled off. (pretext) I bought it because of the
It is clean and affordable.
In case of using OEMSilencer, Instruction Manual says that the gasket can be easily removed, but it is probably stuck to the Silencer side. (Is liquid Gasket also used?) It is likely that many will do so.
It seemed that I would have to destroy it to take it off, but my heart was almost broken when I took a lighthearted first look at it. However, I grabbed it with radio pliers and twisted it, and it came off surprisingly easily. At this time, I had also removed the silencer, so I thought that it would be smoother if I put the exhaust pipe on first.
If you are planning to buy an external Silencer at some point, it will make your work much easier if you buy them at the same time.
Torque wrench is used for the exhaust pipe and the bolt of the engine, and screw lock is recommended for the nut when replacing the heat guard. If you have the right tools, even a beginner can replace it if you take your time.
View detail