Reviews
Ideal for Repair
I purchased this product to refresh a MotorcycleParts terminal cover that was given to me by a friend because it was yellowish and deteriorated. I recommend periodic replacement of the cover because many people use the cover for many years without replacing it, causing it to become damaged and short! View detail
put together in a presentable manner
Recent Small blinker wiring is ultrafine
It's as if it would tear into a thousand pieces if you applied a little too much force.
If you attach it as it is, it will surely break off.
And it looks bad Parenthesis.
So I reinforced it through Tube.
Finished by decorating with an Amigumi Sleeve
Just this much will make it look so much better.
It's definitely better than the BlinkerWiring roundup.
View detail
Trust.
It claims to be weather resistant, so trust it anyway.
I have always been an Emon believer.
… I don't think it's any different than the others, … (laughs)
2sq for Grounding Wire.
View detail
Emon Terminal cover
The cover is quite large for a terminal cover for motorcycles, and if it is for a large type of car, I would have liked to see a description to that effect. View detail
1pc. is useful for various purposes
[How is it used?
I bought it to use as a Drain pan for Oil change.
Oil replacement
Chain cleaning
Parts and tool storage for replacement of OthersParts
It is used for
Was the one you received as per Image?
I thought it was smaller than I expected, but considering that I was going to put it under the belly of the Panigale, 5LiterSize was just right in terms of Clearance.
How was your experience with it?
Oil replacement
In the case of Panigale, it produces about 3.5 liters of waste oil, but the weight of the oil causes it to deflect quite a bit.
There is a scale, but it cannot be used as a scale because there is only a line in one place.
Chain cleaning
I also use it as a receptacle for chain cleaner during chain cleaning. the size is just right and the area around it is now dirt free.
Parts and tool storage
When replacing or removing parts, it is easy to keep bolt nuts, etc. in the box and organize them without losing them.
[Points to note]
Material:It's not like a Stainless Steel pan or something, so I think it might deflect and spill if poured in parallel.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
For Wiring processing
Purchased for Wiring process. No problem. View detail
For Wiring processing
Purchased for use in Wiring process. No problem. View detail
For Wiring processing
Purchased for Wiring processing. No problem. View detail
Quantity for Motorcycle also concerned about car inspections.:2pc. Buy the set
The smoke bomb had expired at the time of the inspection, and at this time, the smoke bomb was for Motorcycle and Quantity for Vehicle.:I bought 2pc
There was also a separate LED light, but I have a regular light separately, so this is the one I used this time.
Light intensity is satisfactory.
The included batteries are for test use and may not last very long, but spare batteries (Alkali AAAQuantity:I think there is no problem as long as you also have a 2pc) or replace it every 12 months or every inspection.
The texture of the lid is a little hard to open, perhaps because it is waterproof, and the "+" and "-" characters are hard to read for people with aging eyes. (Lol)
But the cosmetics are very good considering that they can be used for a long time after replacing the vehicle.
I also have an Emerson LED Sparkle light as a substitute for the triangular version, but it is best not to use it.
The Sparkle light is a very small size that goes under the Seat, but if you can fix it in an inconspicuous place such as inside the Cowl, we recommend that you do so.
Waterproof property seems to be quite strong, so.
View detail
It's strong enough.
In order to use the Portable navigator mounted around the Handlebar and the DriveRecorder (DAYTONA DDR-S100) mounted on the Rear as a Mobile Battery drive, it became necessary to install a Mobile Battery around the Handlebar. The need arose to install a mobile battery around the handlebar.
I wanted to be able to easily attach and detach the Mobile Battery, so I attached the mount of REC mount+ to the Handlebar Brace and attached the Attachment to the Mobile BatteryBody to be able to use it. I wanted to use an existing Attachment, so I decided to use a Smartphone Holder that I had left over.
I had a double-sided tape of 10mm width, so I could use them side by side. I had 10mm wide double-sided tape, so I could use them side by side, but I thought a single piece would be more secure, so I bought this Seat type.
Since it is for in-car use, it may not be good in the rain, but I don't ride in the rain, and since the Mobile Battery is not waterproof to begin with, and I intend to remove it as soon as it rains, I consider rain to be of no concern.
There is nothing special about this ordinary double-sided tape, so all you have to do is cut it out and paste it. The only things I took care of were to wipe the surface to be attached, this time both Mobile Battery and Attachment, clean and degrease them, and to work so that the tape would be attached in one shot to the targeted position. I also made sure to apply the sticker in one shot at the target position.
The price may seem high for the Size, but it is securely attached, so I don't think I will drop it while driving.
View detail
It's firmly attached.
I had a 10mm wide tape and could have attached it side by side with sufficient strength, but I decided to purchase the Seat type because I thought a single piece would be more secure.
Some products are labeled as heat resistant, but this product is also heat resistant. Operating temperature range -20 to 150 degrees Celsius. The product is designed to withstand even midsummer in a car.
This product is slightly thicker, and its elasticity and neSpringba make it more difficult to cut out, so the cross section will be rough if you do not work carefully with a well-cut Cutter.
The adhesive is strong enough. As a basic rule, degrease the surface to be pasted firmly, and work to paste it in one shot at the targeted position.
The price seems high for Size, but it doesn't seem to fall off while driving.
View detail
Powerful
I needed to reattach the Bracket to attach the Camera to the Helmet and purchased the Seat type.
I have been using a bracket of the type that can be attached to a rec mount in order to operate a Camera that is used as a DriveRecorder by attaching it to a helmet. Previously, I was using DAYTONA's DDR-S100 attached to the helmet, so the Bracket was originally attached, but it was removed when the helmet was repainted, so it was necessary to prepare double-sided tape to reuse the Bracket. To reuse the Bracket, we needed to prepare Double-sided Tape.
Since it would be very dangerous if the Camera were to fall out of the helmet while driving, we decided to use a strong double-sided tape and a single piece of double-sided tape.
If it is for the inside of the car, we had Seat type Double-sided Tape in stock, and it seemed to have enough adhesive strength, so we thought about using what we had, but since we cannot say that there is no possibility of driving in the rain, we purchased Double-sided Tape for the exterior that seems to be strong against wind and rain, just to be safe. However, since there was no guarantee that I would be able to run in the rain, I decided to purchase double-sided tape for the exterior that would be resistant to wind and rain.
Since this product is rather thick, it would be better to use a cutter that can cut well when cutting it out. In addition, although it is a basic thing, I think it is better to clean the surface to be pasted, to degrease it firmly, to paste it in one shot at the targeted position, and not to mess with it for about one day because it is not firmly attached immediately after being pasted. As for the cutout, the cross section was rough because it was inevitably cut by hand, but generally, I think it was pasted in a good way. Since it is firmly attached, it is unlikely to be dropped while driving.
The price seems high for Size, but I am satisfied with the results as expected.
View detail
Expected
I was concerned about the dim glow of the post-attached (added) Indicator, so I decided to add a rectification Diode.
When I replaced the meter with a Universal one this summer, there was only one warning lamp, so I purchased an LED lamp from KIJIMA and added an Indicator Lamp, but the Red Lamp was glowing dimly. Well, if I didn't care about it, it would have been fine, so I didn't touch it until now, but recently, I decided to add a rectifying diode while reviewing the wiring.
After following the instructions and incorporating it into Wiring, I was able to eliminate the blurriness of the Lamp, but Wiring became so long that it was difficult to store it.
View detail
Pricey but convenient for beginners
I think it is very convenient for amateurs to connect Motorcycle wires such as Blinker or Tail lamp. First, strip the cord, twist the wire that appears, insert it into the hole in the plastic part of this Connector, and snap it with pliers or something, and you have One Side. Do the same for the other side. The finished products are made of Male and Female, so you can connect them properly by plugging them into each other. It is an excellent product. However, if it is difficult to connect the wires, it is of course useful, but if you have a spacious place and have some room in length, I think it is best to put a solder on it.
The price is high and the cosmetics are not so good. But I think it's useful if you're in a hurry, a very beginner, or in a small space.
View detail
Frosted Material with high texture
I used this product to wiring up my Ninja250SL's sub-computer and USB. Honestly, you can use Curing Tape instead of this product, but this product is pre-cut, so it is easy to work with, and it looks overwhelmingly good, so it is a Recommendation! View detail
Installed in Motorcycle yard.
I installed it in the parking lot for my motorcycle in my small yard on the way home from touring. It is very sturdy so even if I ride up on it with my motorcycle it doesn't scare me! It also contributes to safety as it reflects the light and shines well! The double-sided tape on the back has good adhesive strength and does not come off! View detail
amon Crimp Terminal Comprehensive little kit
Decent quantity of crimps Good selection of terminals. Bought this to ensure correct terminal for repairs. . Very useful and ready for next repair.Great value kit with a good selection. Ideal for everyone's tool box and in a handy case too.came with the little box and very easy to find and storage.Nice concise good quality crimp set that is essential in anyone tool kit.Needed a choice of crimps and terminals for urgent wiring job on motorcycle .They are easy to crimp with the right tool! got 5sets box for very cheap price.I really like this set and worth the money. buy with the confident .you'll get the quality crimp terminal set for lowest price..Need to remind WEBIKE packaging and fast reliable service .WEBIKE PACKAGING IS TOP NOTCH and very well secure.The only place where you can confidently buy the spare parts you need at the lowest prices . If you choose EMS , Shipping chargers are very Fair enough very well organized online shop . webike shop is very AUTHENTIC . 5STAR SHOP. Thank you webike for the support.I'm looking forward to buy more stuff .I highly recommended View detail
The choice of Warm White and White issue colors is awesome!
I installed this product in my yard where I park my Motorcycle.
As you can see from the attached photo, the waterproof coking is firm and will not be soaked or crushed by a large rainfall.
It is also covered with a sturdy frame made of aluminum alloy and gold, so it will not be affected by riding up on a Large Motorcycle. (See the following table for more details. Weight capacity (About 3 tons) I thought it was a little expensive. I thought it was a little expensive, but the quality is very good, so it is acceptable. However, I am concerned about theft, so I think it would be better to install it on private property surrounded by an exterior wall or to install it with an anchor.
View detail
Durable!
I put one on the back of my car and the rest at the entrance to Garage. I scraped it on the ground once when I fell over, but it was strong and only got a few scratches! It's a great job and it's a Recommendation! View detail
A bit expensive but high quality! Be safe!
I have experienced an accident with a child, so I put this product on my Rear Bag for safety first!
I feel that the number of times I have been forced to close the distance between cars has decreased since I completed the application! Safety first! I will be an active Rider for life! This is a recommendation!
View detail