Reviews
Fits: HONDA CB250R, HONDA VFR800X Crossrunner, HONDA CBR650F, HONDA CB650F, HONDA CB650R, HONDA CB400F, HONDA CB300R, HONDA CB400F, HONDA CB125R, HONDA CB125R, HONDA CB500F, HONDA CBR500R, HONDA CBR500R, HONDA CBR400R, HONDA CBR400R, HONDA CBR300R, HONDA CB650R, HONDA CB500X, HONDA CB500X, HONDA CB500X
It takes some getting used to
I took the plunge and bought it, but I think it works well at Camping grounds and such. View detail
Fits: KTM 1290 SuperAdventure R, SUZUKI V-Strom250, YAMAHA XMAX300, APRILIA SRGT200, KAWASAKI Z400, HONDA X-ADV750, HONDA NX400, HONDA XL750 TRANSALP, HONDA CB650R, HONDA CRF1100LAfricaTwin, HONDA CBR650R, HONDA 400X, HONDA NC750X, HONDA CROSSCUB110, SUZUKI V-Strom800DE, SUZUKI V-Strom800
High quality and solid.
It is Anodized with Aluminum Cut-out Body & high texture.
It is also heavy, does not shake with vibration, and the Blue mirror reduces the glare of the Light on the following vehicle.
It is foldable, although its use is limited. it can be folded to prevent it from cracking if it falls over when riding off-road, but I wonder if it can be used casually when parking or putting on Motorcycle Cover.
View detail
Fits: HONDA NX500, HONDA NX400, HONDA CBR650R, HONDA CBR500R, HONDA CB650R, HONDA CB500 HORNET, HONDA CB1000 HORNET
Film is good (CB125R diversion)
It is very nice to have two pieces of Antiglare and Super clear in the box. (Antiglare was used this time)
At this price, two pieces in a package would be appreciated if you need a spare.
The reflection of sunlight was not nearly as noticeable, although it did appear slightly hazy.
The instruction manual states that there is a margin of 2 to 3mm, so it is almost a just fit. We had to work outdoors on a calm day, but we had to fight against dust...
When I tried to remove the Dust Removal Seal, I found that the glue on the meter panel was too strong and left a sticky residue, which I had a hard time removing, and I also put a wound on it (carelessness...).
Be careful of the periphery of the dust-removing seal.
Dust has come in, but after using it anyway. [Color] I would like to compare with Clear.
View detail
Fits: HONDA MSX125, HONDA MSX125SF, HONDA VTR250-F, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROMThailandSpec., SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, HONDA CBR400R, HONDA CBR400R, HONDA CB400SF, HONDA CB400SB
Quantity to your preferred height:Set
Quantity to your preferred height:I was able to set the Quantity to Rear Sets.:Can be set. View detail
Quick response was good!
Good and fast response! I was satisfied with the quality and Large! View detail
Fits: HONDA CBR400R, HONDA CBR400R, HONDA CBR400R, HONDA 400X, HONDA 400X, HONDA NX400
Sounds good.
Installation is easy, even for beginners.
The sound is a bit louder than the OEM, with a thicker, more powerful sound.
It could be a little louder if I wanted it to be.
View detail
Fits: HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin Adventure Sports ES, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin, HONDA X-ADV, HONDA CRF1100L Africa Twin <s, HONDA CRF1100L Africa Twin Adventure Sports ES, HONDA NX400
It would be nice if it comes with an installation Instruction Manual.
An Instruction Manual for installation would be helpful. View detail
Fits: HONDA CBR400R, HONDA CBR400R, HONDA CBR400R, HONDA 400X, HONDA 400X, HONDA NX400
Purchased for appearance.
I bought it because MORIWAKI is the only company that has the external exhaust system for 2024MODELCBR400R at this moment, and I felt confident that MORIWAKI would be the right company to provide it.
The installation was easy even for me, who usually leaves everything to the store, after learning about it on youtube.
My impression without Brushbo,
Idling volume is louder now. I am now more careful in housing complexes.
I guess it's a hairy OEM when it comes to running.
I had heard some people say that Torque had gone up, etc. and had high expectations, but I did not feel that at all.
Rather, I felt that the feeling of being pushed forward at low rpm immediately after the clutch meat was pushed a little less.
On the other hand, the jerkiness of first gear driving has been eased, making it easier to ride.
When driving, the heel of the shoe would touch the middle Pipe, so the melted Rubber was sticking to it.
A little scrubbing won't remove it, but I don't think I'll mind since it will be on every time anyway.
View detail
Fits: HONDA MSX125, HONDA MSX125SF, HONDA VTR250-F, HONDA DAX125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA MONKEY125, HONDA CB250R, HONDA GROM, HONDA GROM, HONDA GROMThailandSpec., HONDA 400X, HONDA CB125R, HONDA CB250R, HONDA CB125R, HONDA CB125R, HONDA CBR250R
Change from OEM
Good texture and easy to change foot placement height.
Note that this cannot be done for OEM footpeg and Position.
View detail
On the current 400X
I had no problems with the rigidity of the product.
Because it is an overseas product, the paint? There were some peeling and rust-like on the
*Myself painted with Spray and Cover.
The installation is a struggle to install Spring as shown on Net.
It was quite strong, but I managed to get into it with the principle of Lever.
Grease was bought separately and applied.
View detail
Fits: HONDA CB500X, HONDA 400X, HONDA NX400
The atmosphere around the Engine has changed dramatically.
I had been looking for a Radiator guard for a long time and found one that I thought would fit EXACTLY. However, the color was not silver, which I had hoped for, so I decided to paint it myself and bought it.
I bought the Clear primer and Silver top coat of Spray paint from Homesense and painted it, and while it didn't give the shine of Stainless Steel, I think it turned out okay. The durability of the paint is unknown, so I will think about it when I have a problem.
Installation is as simple as using a 5mm Hexagonal Wrench and tightening it with the bolt that is already attached.
When I installed it, I couldn't help but grin as the atmosphere around the Engine changed dramatically.
View detail
Fits: HONDA CRF1100L Africa Twin Adventure Sports ES, HONDA CRF1100L Africa Twin <s, HONDA CBR400R, HONDA NX400, HONDA VFR800X, HONDA VFR800F, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR, HONDA CT125・CT110 HUNTER CUB, HONDA XL750 TRANSALP, HONDA NT1100, HONDA NC750X
Cylinder key embedded DIY
We incorporated the Cylinder key with reference to the YouTube video. I am satisfied with the common key. Anyone can DIY if they understand the logic. View detail
Fits: HONDA MSX125, HONDA MSX125SF, HONDA VTR250-F, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROMThailandSpec., SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, HONDA CBR400R, HONDA CBR400R, HONDA CB400SF, HONDA CB400SB
More subdued tones than over Monitor.
[How is it used?
Installed on a MONKEY125 JB03.
Was the one you received as per Image?
I thought it would be a more glaringly gold color, but it was quite a subdued shade.
Was the installation difficult?
Just remove the split pin, pull out the Bolt and replace it.
How was your experience with it?
It is more prominent than NORMAL, but I wonder if it has less Grip power than NORMAL.
[Included Parts:were they on?
Every time I buy a footpeg system, I wish it would at least have a split pin.
It is a part that does not cost much, but I don't understand why it is not included with the Tension you all have.
Even though there are several Riders who notice the split Pin when it comes time to replace it.
View detail
Great
It was easy to install, working as intended. I installed it on my '24 Honda NX500 (CB500XA). Also you can find the install manual via the attached documentary. Thank you! View detail
Fits: HONDA MSX125, HONDA MSX125SF, HONDA VTR250-F, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROMThailandSpec., HONDA CB125R, HONDA CB125R, HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CBR250R, HONDA CBR250R
The spacing between FOOTPEG and GEAR is
I ride a ninja 250.
The distance between the GEAR and footpeg was too narrow, making it difficult to change the GEAR.
It was a good purchase because it can be adjusted with Bolt to various positions.
View detail
Fits: HONDA VTR250-F, HONDA MSX125SF, HONDA MSX125, SUZUKI DL1000 V-STROM250, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SB, KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja400, KAWASAKI Ninja400, KAWASAKI Z400
Endurance Adjustable Step Bar Set
Endurance Adjustable Step Bar Set!! Monkey 125 is the best step bar. It has 12 levels of adjustment, so you can adjust it to suit your individual posture. Above all, the product quality is quite excellent! Delivery is quite fast and I really like the product. I am very satisfied. It is very easy to install and it is very good. ------------------------------ ---------------------------- Endurance Adjustable Step Bar Set!! Monkey 125 is the best step bar. It has 12 levels of adjustment, so you can adjust it to suit your individual posture. Above all, the product quality is quite excellent! Delivery is quite fast and I really like the product. I am very satisfied. It is very easy to install and it is very good. Powered by Google Translator View detail
Fits: HONDA 400X, HONDA CB500X, HONDA NX400
Compromise and purchase
To prevent dirt around the exhaust pipe and puncture of the rear wheel
I would like to extend the Rear of the Front Fender,
While there are only a few compatible parts for 400X,
We finally decided on this product.
Ideally, the product would be sold as a whole Fender, or it would be able to be inserted into an existing Bolt fixed to a Fender.
Before purchasing this item,
We have found a product made by Large land of Bolt On.
Naturally, I was worried.
I inquired about the possibility of installing it, giving the year and model,
The immediate response was that it could be installed,
I bought this one immediately in response to my feelings,
Size did not match at all (laughter).
I will return the product and I will be able to use this product as a Large.
I have purchased the product.
As for the installation, first of all, why did it take so many different shapes?
He said he would probably use double-sided adhesive Seat.
I was wondering for a while if there might be a reason for this,
My 6 year old son was nearby during the installation process,
While making the sticky Seat resemble the face of Pokemon's Character, we flopped it together and pasted it onto the Fender in a harmonious manner.
Plastic screws were included in the package for drilling holes in the Fender and attaching it to an existing Fender,
The thickness of the seal was such that it would not be possible to reach the reverse side using the same screws, so for the time being, only an adhesive seal was used.
Although I am concerned about the adhesive strength, I have used it about 250km round trip including high speed touring×4 times, and so far there has been no dropout, wobble or cracking, but I will do the Screw hitting treatment soon.
View detail
Fits: HONDA VTR250-F, HONDA MSX125SF, HONDA MSX125, SUZUKI DL1000 V-STROM250, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SB, KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja400, KAWASAKI Ninja400, KAWASAKI Z400
The step bar is convenient.
After replacing the low seat, I was looking for a more comfortable, wider, step bar that slides back. There were several brands, but the only product that could allow the bar to fall back a bit was the Adjustable Step Bar Set. After installing it, it was wider than the original and I could move to the back and sit comfortably with my feet. This is a luxurious and stylish step bar. -------------------------------------------------- -------- The exchange of low seats was looking for a more comfortable, wider, and backing step bar. There were several brands, but the only product that could let go of the back was the only one-stop bar set. The installation was wider than genuine and moved backwards and the feet could sit comfortably. It's a luxurious and cool step bar. Powered by Google Translator View detail
essential accessories
This product is an essential accessory for cb500x. Remove the left cowl to reveal the harness required for installation. Just remove the dummy cap and install it right away. The rear retaining nut must be tightened securely to prevent loosening. It is genuine Honda and the quality is very good. -------------------------------------------------- -------- This product is an essential accessory of CB500X. If you remove the left cow, you will see the harness needed for the installation. You can remove the dummy cap and install it right away. The rear fixing nut is tightly tightened so it will not be released. The quality is very good for Honda. Powered by Google Translator View detail
Fits: HONDA CRF1100L Africa Twin Adventure Sports ES, HONDA CRF1100L Africa Twin <s, HONDA CBR400R, HONDA NX400, HONDA VFR800X, HONDA VFR800F, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR, HONDA CT125・CT110 HUNTER CUB, HONDA XL750 TRANSALP, HONDA NT1100, HONDA NC750X
Thank you for the fast delivery.
hangug-e kisillindeoga eobs-eo jumunhayeossseubnida. nt1100e seolchihayeo sayongjung-ibnida. gu-ib hu 4il man-e ilbon-eseo hangug-eulo baesong-i wanlyo doeeossseubnida. There is no key cylinder in Korea, so I ordered it. It is installed and used on nt1100. Delivery from Japan to Korea was completed in 4 days after purchase. View detail