Reviews
It's a must-have item!
I installed it on my 1300GSA, the slope is steeper than the 1250Series, so without it, it would be hard to cause Large change! View detail
Key case
Purchased the Smart key leather Key case. I am looking forward to using it. The price is …. View detail
A little heavy?
Helmet lock opens from Left so Helmet
I think it would be easier to hang it with the Right opening, which is difficult to hang.
View detail
Fits: BMW F750 GS, BMW F850 GS, BMW F850 GS ADVENTURE, BMW S1000 R, BMW S1000 RR, BMW M1000 R, BMW M1000 RR, BMW R1300 GS, BMW R NINE T, BMW R NINE T PURE, BMW R NINE T SCRAMBLER, BMW R NINE T URBAN GS
It is easy to install.
I was looking for dress-up parts when I bought an external exhaust system. 。 I purchased this product because I was told that there is something called SilencerSupport.
While most S1000RR suspension systems are black or silver parts, we liked the eye-catching red parts!
It takes less than 5 minutes to install and replace, so I think it is a good enough product for PetitCustom. ??
It is also good that there are many color line naps, so there are many choices.
View detail
Fits: BMW R1300GS TROPHY, BMW R1300GS TRIPLE BLACK, BMW R1300GS OPTION 719 TRAMONTANA, BMW R1300GS
BMWR1300GSLowerDeflector
I installed it in preparation for winter.
It does not seem to protrude too much like a Large, but it is shaped like a Spoiler, so when I actually ran it, the wind was well rectified so that it did not hit the outside of my knees. I did not feel any wind pressure from my knees to my waist.
Installation requires a bit of hang, but it works well if you align the back Bolt holes and Bolt it on, then install the front Bolt as well. The middle Clip will not be used, but it can be securely attached by tightening the Bolt.
View detail
Fits: BMW S1000RR, BMW S1000R, BMW C400X, BMW F900R, BMW F900XR, BMW R1200GS LC Adventure water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250GS Adventure, BMW F850GS, BMW M1000RR, BMW M1000RR, BMW F900GS Adventure, BMW M1000R, BMW F900GS, BMW F850GS Adventure, BMW R1250R, BMW R1250R, BMW R1250RS, BMW R1250RS
Snap and fit
I installed it on my M1000R Meter. The process was quite easy, just align the lower part of the Visor with the lower part of the Meter and snap the Snap into the upper part. The only thing I was worried about was that the Visor might interfere with the Sports Windshield installed on the Headlight and Meter, but there was a little room to spare, and it fit in beautifully as pictured. I think I made a good purchase with good quality. View detail
_TS.jpg)
Fits: BMW R1300GS OPTION 719 TRAMONTANA, BMW R1300GS TRIPLE BLACK, BMW R1300GS TROPHY, BMW R1300GS
BMWR1300GSHand Guard Extension
I felt a lot of wind pressure on my forearms with the OEM extension on my R1300GSTouring and was looking for something a little more large. The fitting with the OEM hand guard is very good, and it does not feel like an afterthought. View detail
ThrottleSensorCover
[How is it used?
Was the one you received as per Image?
Was the installation difficult?
How was your experience with it?
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: BMW F750GS, BMW F850GS, BMW F850GS Adventure, BMW F900GS, BMW F900GS Adventure, BMW F900R, BMW F900XR, BMW G310GS, BMW K1300GT, BMW K1300S, BMW K1600GT, BMW K1600GT, BMW K1600GT, BMW K1600GTL, BMW K1600GTL, BMW K1600GTL, BMW R12 nineT, BMW R1200GS, BMW R1200GS, BMW R1200GS Adventure
Expensive but good quality!
Replaced the Heller Socket that was standard on the BMW F750GS.
Although it is acceptable to use a USBAdapter for Heller Socket, it is still better to use a USBAdapter directly attached to the Body because of the risk of tampering or theft.
When converting the Heller Socket on the F750GS, it is easy because you don't have to remove the panel all over the place, just put your hand under the panel and turn the Nut, but the included Spanner hits the surrounding panel and won't turn, so I used radio pliers to turn the Nut. Once loosened, you can turn the nut with your fingers!
It seems that I do not need to put Spacer at the root, but when I installed it with Spacer, it is a little close to the LCD panel, so if there is a problem in the future, I will remove Spacer.
A 50cm USB cable is suitable for supplying power to a smartphone attached to the handlebar. The L-shaped cable on the smartphone side is SMART and does not interfere with the tank bag or other devices.
View detail
Windshield missing from GSSports
GSSports does not come with Side Deflector, which is an additional purchase.
I haven't done a proper comparison, but it is a slightly larger Image than the OEM.
For Off running [Color] I purchased Clear and the transparency is high and the visibility on the road surface is sufficient.
To install, simply remove the plastic parts that hide the holes and fasten with the included screws.
Instruction Manual is not included, but there is a WRS video on how to install it, which can be found by searching by product number.
I am supplementing this because it is likely that many people who buy this will own GSSports.
There is a screw hole on the seat side of the side cowl, but the plastic parts that cover the hole have been destroyed and are difficult to remove.
As shown in the video, once you pull up the head of the plastic parts with something like an inner lining remover, you need to grab it with scissors and pull it out vertically and strongly, being careful not to cut it off. If you have a thin Rivet remover, it may be easier.
Also, the Screw on this Cowl is quite easy to lick, so it would be better to work with a little care.
I was putting it on while temporarily fixing it in place by matching, and it licked.
View detail
SMART Tools and Accessory Case
I always like to keep the rear area of my motorcycle clean, so even on a motorcycle like the GS, where it is normal to install a Pannier, I do not install a Pannier and use only the rear back for long-distance touring.
However, since the tools and BOOSTER, which I always carry but do not use very often, which are standard items when touring, were also carried in the back, they were quite heavy when I carried the Rear back at the lodging at the touring destination.
Then I found this product and was attracted by the Size and appearance of the installed state, so I purchased it.
First of all, I purchased this product thinking that the price of this Size box alone, being a product of Europe, could not be helped at this low yen. However, when I received it, I found that it came with a very nice Bracket. I did not expect such a magnificent feeling.
The installation itself is not so confusing, since it is not a translation (please enter here), but it is illustrated and you can install it while looking at it. Just Bolt On and tighten the screws. However, the screws in the Included Parts:section are not ordinary Torx screws, but rather tamper-resistant screws. It is not a problem because a Torx wrench for the anti-torque screw is included in the Included Parts:, but it would be convenient if you can use a Torx wrench you have on hand.
The problem at the time of installation was that I probably forgot to include it when packing, but it came with a key cylinder set that can be used with GS keys, but the manual for that setting was not included. Now I'm in trouble,
I looked at the Wunderlich website and found a Youtube LINK from the OnLineManual for this product. I watched it several times while setting up the product and was able to install it properly. It is very convenient to use the LargeChange because I only need to use one key.
I am LARGE satisfied with the weight reduction and SMARTness of carrying Rear back with this.
View detail
Fits: BMW C400GT, BMW C400X, BMW C600 Sport, BMW C650 Sport, BMW C650GT, BMW C650GT, BMW F700GS, BMW F700GS, BMW F750GS, BMW F800GS Adventure, BMW F800GT, BMW F800R, BMW F800R, BMW F800S, BMW F800ST, BMW F850GS, BMW F850GS Adventure, BMW F900R, BMW F900XR, BMW G310GS
I bought it because I didn't know what to expect.
It is a good one to take ACC signal line without modifying the vehicle Harness.
However, this Gold amount is too bullish.
If you just want to take a signal wire, you should not buy this product but interrupt and take it.
View detail
It was very easy to wake things up!
When I stopped the car, I was so nervous that I forgot to take out the STAND! I was so nervous that I forgot to take out the STAND when I stopped the car! Even Odrumstickyan, whose legs are getting weak, can afford it.
The products of FEED SPORTS JAPAN and r's gear seem to have a better texture, but this one is the best in terms of price.
Installation is very easy … but since I don't have a Torque tool, I couldn't tighten the screws as specified, so I'll just have to live with the loose screws until it's time for dealer inspection.
View detail
Good product
The pedal height adjustment is easy, and when changing boots, it is easy to adjust the pedal height. View detail
Side Stand End
The included screw is too short; I purchased an additional screw at a nearby home center.
The Black Plate was deformed and fit together effectively, so I found it difficult to install with the included screws until it was in this state.
PurchaseScrew, StainlessButton cap M5×15 Pitch0.8 LunchSize3
Installation Grade, Sports
View detail
Fits: BMW S1000RR, BMW S1000R, BMW C400X, BMW F900R, BMW F900XR, BMW R1200GS LC Adventure water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250GS Adventure, BMW F850GS, BMW M1000RR, BMW M1000RR, BMW F900GS Adventure, BMW M1000R, BMW F900GS, BMW F850GS Adventure, BMW R1250R, BMW R1250R, BMW R1250RS, BMW R1250RS
What is the cospa?
It takes less than a minute. Just snap it on. The effect is good. However, the material and texture are not worth the price. I guess it's just an imported product. Well, it's an imported product, so I guess it can't be helped. View detail
Fits: BMW S1000RR, BMW S1000R, BMW C400X, BMW F900R, BMW F900XR, BMW R1200GS LC Adventure water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250GS Adventure, BMW F850GS, BMW M1000RR, BMW M1000RR, BMW F900GS Adventure, BMW M1000R, BMW F900GS, BMW F850GS Adventure, BMW R1250R, BMW R1250R, BMW R1250RS, BMW R1250RS
It's made by Wonderlich, a company you can trust.
I haven't compared it to Chinese products, but I thought it was a sure bet since it is made by Wonderlich, a trusted name in the industry. View detail
Fits: BMW C400GT, BMW C400X, BMW C600 Sport, BMW C650 Sport, BMW C650GT, BMW C650GT, BMW F700GS, BMW F700GS, BMW F750GS, BMW F800GS Adventure, BMW F800GT, BMW F800R, BMW F800R, BMW F800S, BMW F800ST, BMW F850GS, BMW F850GS Adventure, BMW F900R, BMW F900XR, BMW G310GS
Made by Wonderlich, a trusted manufacturer
Made by Wonderlich, which is reliable but expensive.
It would be nice to be able to easily extract power from the back of the Heller Socket.
View detail
Fits: BMW K1600B, BMW K1600B, BMW K1600GT, BMW K1600GT, BMW K1600GTL, BMW K1600GTL, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW C600 Sport, BMW C650GT, BMW F750GS, BMW F800GS Adventure, BMW F800R, BMW F800R, BMW F800R, BMW F850GS, BMW F850GS Adventure, BMW K1200GT, BMW K1600GT
high
KTC's Hexagon socket was half price, so I bought that.
Inch size, so it's not available in stores.
View detail
Fits: BMW R18, BMW R18 Classic, BMW R1250RT, BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200RT, BMW R1200ST, BMW R1200RT, BMW R1200R, BMW RnineT Racer, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT, BMW RnineT, BMW S1000XR, BMW R1200R, BMW R1200GS, BMW R1200GS, BMW R1200GS
Handlebar Cover is pampered
However, these are Handlebar Gloves, so they are safe.
I was able to install the GIVI Hand Guard ExtensionEH5108 with no problems.
View detail