
Reviews
![Compact Half Cover [Medium]](https://img.webike-cdn.net/catalogue/images/91554/22133_TS.jpg)
Fits: その他 , YAMAHA MT-09, YAMAHA NMAX, HONDA XR50Motard, HONDA NSRMini, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GS125 KATANA, SUZUKI GN125E, SUZUKI RGV250γ SP, SUZUKI Gixxer 150., KAWASAKI Z250FT, SUZUKI RGV250γ-SPII, SUZUKI RGV250γ-SP, SUZUKI RGV250γ, SUZUKI RGV250γ, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI NZ250S
Useful for overnight touring
For rain protection on FTR touring...
Purchased for rain protection since the Air Filter Box is removed.
A little longer down there would have been perfect.
If I had a couple more inches.
But in the meantime, I think I can manage to hide the Filter.
View detail

Fits: YAMAHA zeal, YAMAHA XJR400 Diversion, YAMAHA XT250X, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA TZR250R, YAMAHA TZR250RS, YAMAHA TW225, YAMAHA SRX600, YAMAHA tricker XG250, YAMAHA TW200, YAMAHA SRX400, YAMAHA RZ250R, YAMAHA SR400, YAMAHA SR500, YAMAHA SRV250, YAMAHA SRX250, YAMAHA Renaissa, YAMAHA RZ-1, SUZUKI Bandit 400V
Motorcycle Cover with Eyelet
The Motorcycle Cover is a consumable item and should be replaced with a new one.
Motorcycle has a double Cover, and LLSize is selected as the Cover on the Outer side. (Inner is the size that fits the car body)
Since it is Outer, we chose Silver, which reflects the sun's rays, and Large size. (Inner is heat resistant, Outer is reflective)
The Chain is threaded through the front and rear eyelets to keep the Cover from flapping, and the Center is threaded through the lower side and fastened with a one-touch belt.
View detail

Fits: HONDA FORZA, SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900
Seeking a Bar End with high anti-vibration effect
This product was installed until Active's Separate Handlebars Kit was installed.
I used to use DAYTONA's PREMIUM ZONEBar End, but I got tired of the design and wanted a Bar End with high anti-vibration effect and effective in reducing hand numbness.
Installation on the OEM handlebar is very easy. Just combine two Spacer pieces on the Inner and tighten with a Hexagonal Wrench.
By the way, since the thickness of the two Spacers are the same, there is a gap of about 2-3mm between the Handlebar and the Bar End.
At the time I was wearing it, I was driving 500 km round trip on the freeway and 400 km on the highway, but I did not feel much vibration or numbness in my hands, so I think it is a product with a large effect.
View detail

Fits: HONDA VTR250-F, HONDA MSX125SF, HONDA MSX125, SUZUKI DL1000 V-STROM250, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SB, KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja400, KAWASAKI Ninja400, KAWASAKI Z400
I didn't want to replace until Rear Sets, so only footpeg!
For the first time in a long time, I could feel that the parts were really good as soon as I replaced them! I could feel it right away!
I decided on this product because I wanted to replace only the footpeg since I didn't want to replace even the Rear Sets!
I love Parenthesis so much!
It's MONKEY and only footpeg was enough for me! It changes position somewhat, and anyway it looks and is very well made!
Large and satisfying parts!
I'm glad I changed it because it matches the color of the car body!
Maximum satisfaction (Lol)
View detail

Fits: HONDA HornetCB900F (Hornet), HONDA Hornet900 (Hornet), HONDA CL400, HONDA CBR929RR, HONDA CBR600FX, HONDA CBR600FS, HONDA CBR600FR, HONDA CBR600F4i, HONDA CBR600F, HONDA CBR1100XX, HONDA CB400 SUPER FOUR (Super FOUR license training vehicle), HONDA CB400 SUPER FOUR (Super FOUR), HONDA XRV750, YAMAHA XJR1300, YAMAHA XJR400RII, HONDA CB1300 SUPER FOUR <ABS>., HONDA CB1300 SUPER FOUR <ABS> (SUPER FOUR), HONDA XLR125R, HONDA XL1000V, HONDA XLR200R
Design and Dimensions Comparison No Color
Terminals, mounting and external dimensions of the product are exactly the same.
The convex part of the mounting positioning is also the same Design.
The difference is that the OEM says ALPS, but the ordered product says NTB.
Reason for replacement:rattling of brake lever play? The reason for the replacement is that the brake lever has a rattling play?
After replacement, the light is solid no matter where you hold the lever.
Now we hope for durability.
View detail

Fits: TRIUMPH STREET TRIPLE, TRIUMPH SPEED TRIPLE S, DUCATI M400S, MV AGUSTA BRUTALE750S, DUCATI M400METALLIC, DUCATI M400DARK, DUCATI M400DARK, DUCATI M400, DUCATI M400, DUCATI M400, DUCATI M620S, DUCATI M600, DUCATI M620, DUCATI 620SPORT, DUCATI MONSTER696, DUCATI M750, DUCATI M750, DUCATI SS750, DUCATI 750SS, DUCATI SS750
It doesn't fit.
The front wheel is bare for about 1/3 of the front wheel, and the front wheel will soon get dirty during storage, no matter how clean and polished it is.
The front is not completely covered, and on windy days, it always rolls up, making it useless. Today I replaced it with a Motorcycle Cover from Y's Gear.
View detail

Fits: HONDA 400X, HONDA 400X, HONDA BROSProduct1, HONDA BROSProduct2, HONDA CB-1, HONDA CB-1 TYPEII, HONDA CB1000R, HONDA CB1000R, HONDA CB1000SF, HONDA CB1000T2, HONDA CB1100, HONDA CB1100SE, HONDA CB1100EX, HONDA CB1100BLACKSTYLE, HONDA CB1100RS, HONDA CB1100E Package, HONDA CB1100RS Final Edition, HONDA CB1100EX Final Edition, HONDA CB1300 SUPER TOURING, HONDA CB1300SF
Cheap!
I purchased this product to get free shipping on my OEM Parts purchase.
If you buy it at a mass retailer, it costs about 1,600 yen.
This is a change of 1,000 yen.
I think it is quite inexpensive.
This will Repeat.
View detail

Fits: YAMAHA YZF-R7, YAMAHA TRACER9GT, YAMAHA XSR900, YAMAHA TRACER9GT, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-10, YAMAHA MT-10SP, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI SV650X, SUZUKI GSX-R125, SUZUKI GSX-S125, KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R
The texture is as good as it gets.
The best thing about YOSHIMURA's AnodizedParts is the beauty and precision of the parts, including the texture. It satisfies the sense of ownership. View detail

Fits: HONDA CB400Four, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA NC750S, HONDA CB400SF, HONDA VTR1000F, HONDA VTR250, HONDA VFR800, HONDA VFR1200F, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA CBR400R, HONDA NC700S, HONDA NC700X, HONDA CB250R, HONDA CB250F
Beautiful color.
I wanted to change the footpeg to match the color of the body, and I bought this one on the recommendation of a senior member of Large who is very knowledgeable about motorcycles.
It takes some getting used to the hem catching on the edges, but the grips are surprisingly good, and I'm satisfied with the large size.
If the colors were just a little brighter, it would be ◎
I'm on 8BK-MC51 and when replacing the Leftfootpeg, the Joint pin that stops the footpeg interferes with the Clutch pedal and I can't get it out no matter how hard I try!
I gave up and decided to strip everything from the Footpeg Plate to the Clutch pedal….
It was a difficult task for a woman to do.
Split pins should also be replaced each time because they are an important part and are not expensive!
And don't forget to Grease up.
View detail

Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
It is very warm!
I had it installed and rode around town for about 2 hours in January at an outside temperature of 7°C. It was very warm. I think I can ride safely in winter now. View detail

Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Super Boldor, HONDA CB1300 Superbordor, HONDA CB400 Super Boldor
Meter area has tightened up.
I feel like my Meter area has tightened up. I think the price is a little high. View detail

Fits: HONDA CB750, KAWASAKI GPZ900R, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, YAMAHA XJR1300, YAMAHA XJR1300, HONDA CB400Super BOLDOR Revo, HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, KAWASAKI ZRX1200, SUZUKI BANDIT1200S, HONDA CB1300SF, SUZUKI GSX-R1100, SUZUKI GS1200SS, YAMAHA XJR1200, KAWASAKI ZZR1100, KAWASAKI ZZR1100
It's still good!
This is my second purchase! The first time was for a cb400sf and this time for a cb1300sf. (*´**) View detail

Fits: YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA XSR900, YAMAHA TRACER900GT, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA TMAX530, YAMAHA NIKEN, YAMAHA MT-09, KAWASAKI Z900RS, KAWASAKI NINJA1000, KAWASAKI NINJA ZX-25R, HONDA PCX150, HONDA CBR400R, HONDA CBR250RR, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA 400X
Only looks
I bought it because my Point was about to expire.
I thought Blue or Gold might be possible, but Blue is something different to match the Body color Blue.
That said, Gold is also different.
That is why we chose Black.
Installation is simply done by hand or with tools.
The O-ring was removed from the original one and used that.
View detail
![VX Series Chain 525VX3 Gold [with Caulk (ZJ) Joint]](https://img.webike-cdn.net/catalogue/images/73326/0517_525VX3_G&G_P_togo_TS.jpg)
Fits: HONDA VFR400Z, HONDA VFR400R, HONDA STEED400 VSE, HONDA STEED400 VLX, HONDA STEED400 VCL, HONDA SHADOW600, HONDA CBR1000RR-R FIREBRADE SP, HONDA CBR1000RR-R FIREBRADE, KAWASAKI Z1000, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja1000SX, SUZUKI V-STROM650XT, SUZUKI V-STROM650, SUZUKI V-STROM1050XT, SUZUKI V-STROM1050, SUZUKI GSX-R400, KTM LC8 Super moto, HONDA CBR500R, KTM 990 SUPER DUKE, KTM 990 ADVENTURE R
I haven't used it yet, but everyone says it's a good product, so I guess it's good ^^
I haven't used it yet, but everyone says it's a good product, so I guess it's good ^^
---------------------------------------------------------- I haven't used it yet, but everyone says it's a good product, so it would be nice ^^ Powered by Google Translator
View detail

Fits: SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900, HONDA HORNET600, HONDA GROM, HONDA FORZA
Bar End
I think it is completely a matter of appearance, but I am satisfied with the dress-up.
The quality is good and the Screw1 pc closure is easy to install and fitting was no problem.
View detail

Fits: HONDA CB1000SF, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA VFR1200X, HONDA VFR800, HONDA VTR1000F, HONDA X-4, HONDA CBR600F4, HONDA CBR600F4I, HONDA CBR900RR, HONDA VTR, HONDA VFR800F, HONDA VFR800X, HONDA RVF400, HONDA NSR250R, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250, HONDA DN-01
Texture is also GOOD
I chose ZEATBrand because I used to be an off-road driver and I have confidence in ZEATBrand,
It looks and feels more than adequate. Replacement is relatively easy, and as long as you understand the structure, you should have no problem (have Grease ready).
View detail

Fits: HONDA DIO110, HONDA DIO110, HONDA DIO110Basic, HONDA CB125T, HONDA CBR125R, HONDA SPACY125, HONDA SPACY125, HONDA SPACY125Striker, HONDA CB223S, HONDA FTR223, HONDA SL230, HONDA XR230, HONDA XR230MOTARD, HONDA CB250F, HONDA CBR250R, HONDA CRF250L, HONDA CRF250M, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R SP
Needs a little work.
I installed it on V-STROM250, but the back side of the headlight case is shallow and slightly interferes with the headlight case, so I cut it with a soldering iron and installed it.
I am satisfied with the functionality, durability remains to be seen.
View detail

Fits: HONDA APE50, HONDA BENLY PRO, HONDA BENLY110 PRO, HONDA BENLY110, HONDA BENLY, HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300SB, HONDA CB1300SF, HONDA CB250F, HONDA CB250R, HONDA CB400F, HONDA CB400SB, HONDA CB400SF, HONDA CB650R, HONDA CBR1000RR-R FIREBLADE SP, HONDA CBR1000RR-R FIREBLADE
Silver anodized is chic and good!
[How is it used?
I purchased this product to install a Breather pipe on a CD50 modified Engine.
Was the one you received as per Image?
The product was exactly as shown in the Image.
Was the installation difficult?
It can be easily replaced with a NORMAL Oil Filler Cap. In my case, it is a little troublesome because I have a mesh hose with a fitting.
How was your experience with it?
I can see that the blowby gas is coming out, but I don't ride in such a way that the internal pressure is high, and although it is hidden by the frame, there is an OEM Breather Hose 650mm 6mm Diameter on the EngineCenter side, so the effect is questionable. I am not sure if it is effective.
[Included Parts:were they on?
Hose Band is included.
[Was there anything that disappointed you?
Since the oil change is done frequently, the corner of the Glasses Wrench is gradually being chipped off as it is removed each time.:I know it's aluminum, but it's a shame.
▼I chose Silver so that the outlet would not stand out too much, but now I am using a Mesh hose with a Blue fitting, so even if the outlet is Blue, I will be able to use it without any discomfort.
View detail

Fits: HONDA CB400SS, HONDA CBR400F, HONDA CBX400F, HONDA CBX400F, HONDA GB400, HONDA REBEL, HONDA REBEL, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB, HONDA CB400SF HYPER VTEC Revo, TRIUMPH STREET TRIPLE, TRIUMPH BONNEVILE, TRIUMPH SPEED TRIPLE S, MV AGUSTA BRUTALE750S, DUCATI M400S, DUCATI M400METALLIC, DUCATI M400DARK, DUCATI M400DARK, DUCATI M400
Cost-effective Black cover
[How is it used?
I am using it on my GLADIUS 650400 and bought the Large size because I am wearing a GIVI Carry case.
How was your experience with it?
It works fine
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail

Fits: Others , SUZUKI DL1000 V-STROM1050, YAMAHA TENERE700, HONDA CT110, DUCATI SCRAMBLER, SUZUKI V-STROM250, BMW R1150GS, KAWASAKI NINJA250, YAMAHA XSR700, HONDA CB400SUPERBOLD'OR
Considerable capacity
It's pretty big! It feels sturdy!
Design is okay, I guess!
This Manufacturer's Backpack is excellent and probably good!
View detail