Reviews
Fits: BMW C1 200, BMW C1 125, BMW C1, BETA Jonathan 125, BETA Euro 350, APRILIA SL750 Shiver ABS, APRILIA SL750 Shiver GT ABS, APRILIA Pegaso 650, APRILIA Pegaso 650ie, APRILIA Pegaso Strada 650, APRILIA RC250, BMW F650 CS, BMW F650 GS, BMW F650 GS, BMW F650 GS, BMW F650, BMW F650, BMW F650 CS, APRILIA Caponord 1200 Travel Pack, APRILIA Caponord 1200
Replace RearBrake Pads
OEMPad sometimes squeaks, so I replaced it with this Pad, which has a proven track record of use.
Drove several hundred kilometers after the work. No squeal.
Control is good
It should last for tens of thousands of kilometers, since it's all touring, not hauling stuff.
View detail
![Brake Pad - OFF-ROAD [SD] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0296/23955287_20220325132906085_TS.jpg)
Fits: YAMAHA XT660Z Tenere, TM 4T, ROYAL ENFIELD , ROYAL ENFIELD , KTM 660LC4, KTM 300EXC, KTM 250EXC, HUSQVARNA SM630R, HUSQVARNA TE125, HUSQVARNA TE125, HUSQVARNA TE E LT, HUSQVARNA SM125, HUSQVARNA SM S 4T, HUSQVARNA SM S, HUSQVARNA SM, HUSQVARNA FE501, HUSQVARNA FE450, HUSQVARNA FE350, KTM SXC, KTM SXS
It was also perfect in Race.
[How is it used?
Installed on a G650 XCOUNTRY race car with brembo calipers.
How was your experience with it?
The first condition I used was a muddy situation, but the brake worked well without any slippage.
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
Great startup and throttle response.
Replaced Iridium plugs that had run 6000km and were losing starting performance.
Startup was restored, Response was improved, and fuel economy, which had been declining, was restored.
Startup and Response feel better than Windshield IRIDIUM.
The rest depends on durability… If you bring it to the same etc. as the Windshield IRIDIUM….
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
Good starting and throttle response!
The Iridium plugs I had previously installed were getting worn out and losing starting performance, so I installed DXPlugs, which I had been curious about.
I think Axel s Pons with startup over Windshield IRIDIUM.
I would like to test fuel efficiency and durability as I ride from now on.
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
It's a single cylinder (laughs).
For WR250F.
Yes, it's a single cylinder. It's a single cylinder, so all you need is 1 pc.
I've been wanting to use it since its new release.
I'm on a 4-cylinder and a 2-cylinder.
Then, of course, 4Quantity:I need 2pcs,
I couldn't take the plunge to introduce it (laughs).
If it's a single cylinder.
Since they are Carburetor Vehicles, I wonder about durability and such.
The starting performance is good to begin with and I haven't ridden it much so far,
I will do a proper ride comparison with the regular Plug to see how it differs.
View detail
![Brake Pad - OFF-ROAD [SX] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0276/23955293_1_TS.jpg)
Fits: ROYAL ENFIELD , ROYAL ENFIELD , KTM 660LC4, KTM 300EXC, KTM 250EXC, TM 4T, YAMAHA XT660Z Tenere, HUSABERG FC550, HUSABERG FC450, HUSABERG FC450, HUSABERG FC, HUSABERG FC, HUSABERG FC, GASGAS WILD HP, HONDA SLR650 VIGOR, GASGAS WILD HP, GASGAS WILD HP, HUSQVARNA FE250, HUSQVARNA FC450, HUSQVARNA FC350
Effectiveness is improved for Large, but controllability is reduced.
I installed it on my GasGas EC250 that I always use for forest road touring.
The reason for installing them was because my previous ZETA Brake Pads did not stop at all and I had many close calls on Downhill,
Brake Pads are installed here to improve braking power.
Braking power, which was the original goal, has been considerably improved, and the Motorcycle is now able to stop firmly.
With the ZETA, I was able to stop with a full three-finger grip, but now I can brake reasonably well with just one finger,
As for stopping, it exceeded my expectations.
On the other hand, when you want to apply a little bit at low speed, the Controllability is reduced and finesse is required.
As a result, I am very happy with the braking power that was firmly increased so that Speed does not come out.
View detail
Fits: HUSABERG FE600e, HUSABERG FE501e, HUSABERG FE400e, HUSABERG FE600e, ADIVA N125, ADIVA R125, APRILIA SCARABEO125, APRILIA SCARABEO100150, APRILIA SCARABEO200, APRILIA LEONARDO125, APRILIA LEONARDO150, BENELLI VELVET125, BENELLI VELVET125250, BETA RR 4T LC ENDURO, BETA RR 4T LC MOTARD, bimota Bellaria600, CAGIVA V RAPTOR1000, CAGIVA V RAPTOR650, CAGIVA EXTRA RAPTOR1000, CAGIVA NAVIGATOR
Might be more fuel efficient.
I had an extra bottle that I had bought for NINJASL before, but it was for VERSYS.
I bought one more bottle this time because I found it to be usable.
I had Shop replace it during the one year inspection (I was too lazy to remove the Tank).
I didn't see the effect at the time of NINJASL, but this time it was clearly responsive.
The new system is now available (we suspect it may be compatible with the Exhaust System).
Fuel economy is also about 5% better, although it is a full Tan method (which may be for the same reason).
In case you are wondering, at the time of NINJASL, it was a No Brand Exhaust System, but VERSYS
The same engine number is used for NINJA with an extended bracket.
(On paper, it is a government-approved Exhaust System.)
It may be the frasivo effect, but I can recommend it.
View detail
Fits: INDIAN MOTORCYCLE 1130 SCOUT, INDIAN MOTORCYCLE 1130 SCOUT BOBBER, INDIAN MOTORCYCLE 1000 SCOUT SIXTY, HUSQVARNA VITPILEN 401, HUSQVARNA VITPILEN 701, HUSQVARNA TR650 TERRA, HUSQVARNA TR650 STRADA, HUSQVARNA TE250, HUSQVARNA TE 510 CENTENNIAL, HUSQVARNA TC250, HUSQVARNA TC250, HUSQVARNA TC 510, HUSQVARNA SVARTPILEN 701, HUSQVARNA SVARTPILEN 401, HUSQVARNA SM 510R, HUSQVARNA SM 450R, HUSQVARNA SM 510R, HUSQVARNA SM 450R, HUSQVARNA SM 400R, HUSQVARNA NUDA900
I think it is a good, inexpensive product.
This is a Rear Brake Pads replacement for a 2022 Gixxer 150, note that the pad numbers are different until the 2019 model year!
https://imp.webike.net/article/636864/
To replace it, remove the pin, remove the shaft, and replace it.
The worn out pad has a pod sticking out, so a new pad will not fit in the gap, so a push-back tool is used to put it back in.
If this work is not done well, the pad will not fit, so the skill in this area depends on the person, and it is an important part, so if you don't have an earthquake, have it done at a store.
The Pad is neither good nor bad, and I continue to use SBS, which is cheap like DAYTONA's RedPad, so I guess it's a matter of preference.
View detail
Fits: BMW K1200 R, BMW HP2 Megamoto, BMW HP2 Sport, BMW HP2 Sport, BMW HP2 Megamoto, BMW HP2 Enduro, BMW HP2 Enduro, BMW HP2 Enduro, APRILIA SRV 850, APRILIA SRV 850 ABS ATC, APRILIA RX125, APRILIA RX125, APRILIA RST1000 Futura, APRILIA MX125 Cross, DUCATI Multistrada Enduro, MOTOGUZZI Griso 1100, YAMAHA XMAX300, Others Off Road Caliper P2 28 (Code XQ21361), Others VR250 Super，Otard, Others VR250 Enduro
It works better than ZETA's Pad!
I installed it on my gasgas EC250 which I always use for forest road touring.
I used to use ZETA Brake Pads, but I had a symptom that the brake did not work too well on descents, and my arms would go up when I rode for a long time or during high-load Situations such as Race.
So I started working on improving Brake and the first thing I bought was Brake Pads.
It was not a drastic improvement, but it works better than ZETA's Pad, and it can stop with a little less Speed in Downhill, etc. However, I still have the impression that a little more StopPingPower would be nice.
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
2-wheel dedicated Plug
It is often said that Iridium plugs are difficult to understand the carburetor setting, but I think this 2-wheel dedicated plug is easy to judge the thickness of the main jet and slow jet.
I feel that a little thicker is more reliable because of the strong momentum of the Spark. If it is even a little thin, the electrode will be firmly White.
I thought it would be easier to judge than Windshield IRIDIUM.
View detail
Fits: ROYAL ENFIELD , ROYAL ENFIELD , KTM 660LC4, KTM 300EXC, KTM 250EXC, TM 4T, YAMAHA XT660Z Tenere, HUSABERG FC550, HUSABERG FC450, HUSABERG FC450, HUSABERG FC, HUSABERG FC, HUSABERG FC, GASGAS WILD HP, HONDA SLR650 VIGOR, GASGAS WILD HP, GASGAS WILD HP, HUSQVARNA FE250, HUSQVARNA FC450, HUSQVARNA FC350
Keep a spare supply of consumables so they can be changed at any time.
Purchased for TC125. Brake Pads are available from other Manufacturers such as RK, Vesla, ZETA, etc., but I chose OEM because the price is almost the same at the fixed price Base.
The fee ring is the same as the one currently attached (I think), so the fee ring should remain the same.
Since this is not a vehicle that I ride frequently, it is important for me that this fee ring remains the same.
If the fee ring is changed, the riding will become awkward.
I have a stock of these Brake Pads so that I can use the consumables whenever I need them, just as I do with Levers.
View detail
Fits: BMW C1 200, BMW C1 125, BMW C1, BETA Jonathan 125, BETA Euro 350, APRILIA SL750 Shiver ABS, APRILIA SL750 Shiver GT ABS, APRILIA Pegaso 650, APRILIA Pegaso 650ie, APRILIA Pegaso Strada 650, APRILIA RC250, BMW F650 CS, BMW F650 GS, BMW F650 GS, BMW F650 GS, BMW F650, BMW F650, BMW F650 CS, APRILIA Caponord 1200 Travel Pack, APRILIA Caponord 1200
safety
DUCATI SCRAMBLER2020 Rear Wheel Brake
The original pad is from bremboOEM, but we replaced it with this one.
When I first started using it, I was worried that it wouldn't work…? But as I let it sink in, it worked just as described. It works as long as you hold it/step on it." I feel that it is more Mild than OEM.
I think it is suitable for running like adjusting the speed with the rear brake while keeping the RPM low with a tight corner.
As for durability, I don't know since I've only just started using it.
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
unusual
It's really changing. It's getting faster. It's so much easier. View detail
Fits: BMW C1 200, BMW C1 125, BMW C1, BETA Jonathan 125, BETA Euro 350, APRILIA SL750 Shiver ABS, APRILIA SL750 Shiver GT ABS, APRILIA Pegaso 650, APRILIA Pegaso 650ie, APRILIA Pegaso Strada 650, APRILIA RC250, BMW F650 CS, BMW F650 GS, BMW F650 GS, BMW F650 GS, BMW F650, BMW F650, BMW F650 CS, APRILIA Caponord 1200 Travel Pack, APRILIA Caponord 1200
Easy to use with OEM Fee Ring
Some pads work with a Snap at the moment of grip, but a pad that works too hard is nerve-wracking when you want to slow down while dragging the Brake a little.
The Pad here has a Fee Ring that is close to OEM and is gentle at the beginning of the grip, making it easy to control the Brake.
Of course, it works well if you hold it firmly.
Breaking has become more enjoyable after adding this pad because it works consistently in a sensible speed range, regardless of weather conditions.
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
All Motorcycles I have are these.
Every Motorcycle I own has this on it. View detail
Fits: HUSABERG FE600e, HUSABERG FE501e, HUSABERG FE400e, HUSABERG FE600e, ADIVA N125, ADIVA R125, APRILIA SCARABEO125, APRILIA SCARABEO100150, APRILIA SCARABEO200, APRILIA LEONARDO125, APRILIA LEONARDO150, BENELLI VELVET125, BENELLI VELVET125250, BETA RR 4T LC ENDURO, BETA RR 4T LC MOTARD, bimota Bellaria600, CAGIVA V RAPTOR1000, CAGIVA V RAPTOR650, CAGIVA EXTRA RAPTOR1000, CAGIVA NAVIGATOR
Windshield IRIDIUM has a life expectancy of 10,000 km?
GN125H started to breathe occasionally and I decided to replace the Plug along with cleaning the Air cleaner element.
Since it is a Windshield IRIDIUM, I thought it would still be Large durable for 10,000 km or so, but the electrodes were clearly deteriorated compared to the new ones.
About 10,000 km seems to be the limit for Windshield IRIDIUM.
After replacing it with a new one, the Torque feeling goes up and the breathing is gone.
Do not overestimate the longevity of Windshield IRIDIUM.
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
cannot be experienced
Unlike Oil, I could not feel it when I replaced it from OEM. View detail
Fits: Others CAN-AM Helmet Commander 800, Others CAN-AM SPIDER RT LTD, Others CAN-AM Renegade 800R EFI/X XC, Others CAN-AM Outlander MAX 650 EFI, Others CAN-AM Outlander MAX 800R EFI, Others CAN-AM Helmet Commander 1000, KTM 990 640LC4 SUPERMOTOR, KTM 990 640LC4 SUPERMOTOT, Others CAN-AM Outlander 500 EFI, Others CAN-AM Outlander 650 EFI, Others CAN-AM Outlander 800R EFI/LTD/XXC/XMR, Others CAN-AM Outlander MAX 500 EFI, KTM 990 640LC4 SUPERMOTO, KTM 660 SMS, KTM 990 Adventure, KTM 990 AdventureS, KTM 990 990SUPER DUKE, KTM 640 LC4Enduro, KTM 640 LC4640LC4 SUPERMOTO, KTM 640 DUKE
Prepare for summer
The 900SS is originally an Engine using No. 8, but we use No. 7 in the winter and No. 8 in the summer.
I tried Iridium plugs No.8, but I couldn't tell the difference, so I chose Standard Plug BP5HA because it is more economical. Iridium plugs seem to be more durable than Standard Plug BP5HA, but Standard Plug BP5HA is enough for me because I have to replace it once every 6 months. I think the Standard Plug BP5HA is sufficient for the cycle of replacing the plugs in half a year.
View detail
Fits: HUSQVARNA FC 250, HUSQVARNA FC 350, HUSQVARNA FC 450, HUSQVARNA FE 250, HUSQVARNA FE 250 SPECIAL EDITION, HUSQVARNA FE 350, HUSQVARNA FE 350 SPECIAL EDITION, HUSQVARNA FE 450, HUSQVARNA FE 450 SPECIAL EDITION, HUSQVARNA FE 501, HUSQVARNA FE 501 SPECIAL EDITION, HUSQVARNA FX 350, HUSQVARNA FX 450, HUSQVARNA TC 125, HUSQVARNA TC 250, HUSQVARNA TE 125, HUSQVARNA TE 125 SPECIAL EDITION, HUSQVARNA TE 150 I, HUSQVARNA TE 250, HUSQVARNA TE 250 2T
Genuine JT 50 tooth rear sprocket for Husqvarna TE300
Purchased the rear sprocket as spare to replace the stock ones when needed. Already purchased the chain for this set up but unfortunately, at the time, the front sprocket was not available on Webike so had to source elsewhere. No big problem as I could actually get one of those quickly just in time for this and the chain to arrive. Have used JT sprockets for many years and know they are brilliant quality and do last a long time compared to some other brands. Decided to stick to the oem set up gearing as this is how the bike is supposed to operate. Maybe in the futue I will try a tooth lower in the front and a few higher in the rear but for now, stay OEM gearing. Easy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. Price was pretty good. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The machining of these sprockets is second to none. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for teh simialr price range before. I will stick with JT Sprockets.Have fitted before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need. This is my set up for the Husky View detail
Fits: INDIAN MOTORCYCLE 1130 SCOUT, INDIAN MOTORCYCLE 1130 SCOUT BOBBER, INDIAN MOTORCYCLE 1000 SCOUT SIXTY, HUSQVARNA VITPILEN 401, HUSQVARNA VITPILEN 701, HUSQVARNA TR650 TERRA, HUSQVARNA TR650 STRADA, HUSQVARNA TE250, HUSQVARNA TE 510 CENTENNIAL, HUSQVARNA TC250, HUSQVARNA TC250, HUSQVARNA TC 510, HUSQVARNA SVARTPILEN 701, HUSQVARNA SVARTPILEN 401, HUSQVARNA SM 510R, HUSQVARNA SM 450R, HUSQVARNA SM 510R, HUSQVARNA SM 450R, HUSQVARNA SM 400R, HUSQVARNA NUDA900
I am satisfied with the product. (Failed in Spring Sale lol) )
Yaay! If you buy in the afternoon on 3/24, 3,198 yen became 2,962 yen with the Spring Sale, or you bought in the morning! (Lol)
I replaced the front brake pads and now it stops when I snap it, so I'm going to replace the rear brake pads with new ones.
Pull the clamping shaft out to the back, pull the old one out to the front and frame the new one….
Hmmm, it won't fit… I have to push the pot in because it's thicker.
Disc Brake Piston Tools
https://www.webike.net/sd/20205012/
Press back against the
I'm not sure if it's time for an overhaul.
But I thought the exchange was over.
It was originally scuffed up with air biting and completely scuffed up. So, I connected DrainPipe and used a syringe type
https://www.webike.net/sd/1647527/
I did air ejection, but the Brake pedal is too skunky and Fluid is not coming out.
I might be able to get a better one with a Small Type Vacuum pump, but it won't be ready today or tomorrow, and I can't be sure.
I can't help myself today, so that's it.
The next day, I went to Red Baron in Asaichi! (Lol)
I'll write the full story in the shoppreview. (Lol)
View detail