Reviews
They sure do increase the appeal when fitted to a set of red forks on the Monkey 125
About quality and texture - The front fork top bolt set from Kitaco is made from billet aluminum with detailed machining and a red anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - This top bolt set serve no purpose other then to increase the appeal on the Monkey 125 and they sure do achieve that when fitted to a set of red forks. Products to buy together - A key product to purchase when working on the front forks would be a set heavier set of springs as the original ones need upgrading for just about everyone that ride a Monkey 125. Difficulty of installation - The installation of the front fork top bolt set is an advanced task that took 1 hour complete due to the unloading of the front forks and loosen of numerous fasteners allowing for access. Mechanical aptitude and the use of basic hand tools is what is required to secure top bolt set to the front fork tubes. Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the front fork top bolt set is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the front fork top bolt set, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
I'm writing well.
It's been a while since I bought it, and I thought it was necessary to change it at first, but the more I use it, the more satisfied I am with the dress-up parts. The regular genuine lever was really uncomfortable. It's far from my hand and the lever is thin. It was hard because I kept turning off the bike with the genuine lever, but it's so nice that it's almost gone after changing it. I highly recommend it. View detail
I think I bought it well
I bought a Monkey 125 and enjoyed riding it, but the muffler manifold always felt empty. I looked it up and found an item called an engine underguard. I bought it because I thought it would fit well with the Monkey 125 I'm planning. I think it's good to get both dress-up and protection effects.. View detail
Fits: SUZUKI HI UP, SUZUKI SEPIA, SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESS V100, SUZUKI AddressV, SUZUKI Address50
very fast pulley kit
Excellent, now the address 100 goes not 90 km/h but 110 km/h, the transmission is excellent, I recommend it to everyone, well packaged View detail
A better throttle pipe for the GROM!
This is an improved throttle pipe from KITACO for the Honda MSX/GROM. It makes a slightly quicker throttle response (around 10%) which is ideal for the street use and not not as much as an racing quick action throttle. It's a good priced part and as usual from KITACO, a very good quality one. View detail
Fits: HONDA AA04-PRO, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125
Good quality rear sprocket from KITACO
This is a good quality rear sprocket from KITACO, it's made of steel so it's much more durable than the aluminium ones if a bit more heavy but on the plus side it is a lot less expensive also. This is 32 teeth, it's 2 less than the original 34 one so it's better for top speed. Another good quality product from KITACO as usual! View detail
Fits: HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD
Genuine Kitaco Kick Pedal for APE 100
This was a replacmemt for the standard that a customer wanted to try to improve the look of the bike as the OEM was not looking to great. Finding a replacement after market one was not hard as after reading a lot of forums for the APE100 the consensus was the Kitaco one for sure. The price for the Kitaco kick pedal was great value and chepaer than the OEM Honda one anyway. I do not generally use after market parts but this customer definitely wanted this brand. With a few other parts, the order was shipped using EMS and arrived in 5 days from being shipped. The kick pedal arrived in the Kitaco packaging and is a really nice piece of kit if I am honest. The finish is a brilliaint almost chromed look but I am sure it is just very well poilished. The fitment was not tricky at all as it is literally one bolt and that's it. The shape is virtually the same as the OEM so no problems with it movement. Veyr happy customer right here. Thanks Webike. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
OEM same etc., inexpensive and good.
It was used for the second Exhaust System removal and installation.
The texture was almost the same as OEM.
Since it is Gasket, the feel is comfortable.
Quantity:1 Set of 2pcs. so it is also cosmetically pleasing.
View detail
The usual.
This is the Lock wire I use all the time.
I bought it because it was out of stock.
I have Sizes before and after this one, but the 0.57mm is the most versatile.
View detail
Installation almost broke my heart.
If you don't have the skill to tinker with motorcycles, don't do it by yourself. The instruction manual says to remove the headlight, but since I had installed various external parts, I could not remove the headlight and it took me about 3 hours to complete the installation using all kinds of tools. I recommend you to have it installed at a shop for about 5,000 yen.
As a product, HONDA's Logo is a good product with a good parenthesis and a custom feel.
View detail
Fits: HONDA SUPER CUB 50Standard, HONDA SUPER CUB110, HONDA SUPER CUB110Standard
Easy installation for everyone
The point that anyone can easily install is good. However, when removing the body of the SUPER CUB, the part that comes in contact with the SUPER CUB is
If you cure with tape in advance, you can avoid putting wounds on the surface.
View detail
cracked glass
I purchased the Racer to make it a public road Spec.
We were looking for something not too expensive, but not too fragile and with good performance for off-road use.
I bought this one because Lens is resistant to cracking, and it looks pretty good.
The size is small so as not to spoil the silhouette of the car body, and above all, at this low price, even if the Lens is broken, there will be no damage.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50-PRO, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA MONKEY125, HONDA glom, HONDA SUPER CUBC125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
When replacing the Oil Filter, please use this product.
I waited until the time of the Filter replacement to have it installed since I had OilReserve done at the store where I purchased the vehicle. View detail
It is KITACO after all.
KITACO has a rich lineup of fine dress-up parts. I am satisfied with the quality. The instruction manual says to remove the cell motor once and to install the ball point hexagonal wrench, but I was able to install it normally. View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
It's comfortable
The feel of operation is very good compared to the genuine or Alibalever bar. Adjusting the clutch cable after installation is essential. It is highly recommended for those who have small hands or have difficulty using the genuine lever. The build quality is also excellent, providing a fitting feeling similar to a genuine low-quality product. As expected, it's the Kitako lever of faith. It's good ------------------------------------------ ---------------- The feel of operation is very good compared to the genuine or Alibalever bar. Adjusting the clutch cable after installation is essential. It is highly recommended for those who have small hands or have difficulty using the genuine lever. The build quality is also excellent, providing a fitting feeling similar to a genuine low-quality product. As expected, it's the Kitako lever of faith. Good. Powered by Google Translator View detail
Fits: HONDA glom, HONDA Super Cub 50, HONDA SUPER CUB110, HONDA SUPER CUBC125, HONDA MONKEY125
I cannot believe how easy this tool made the crankshaft installation
About quality and texture - The crankshaft assembly tool from Kitaco is made from a heavy duty steel and with an oxide coated surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I cannot believe how easy this tool made the crankshaft installation. Simple to use with basic hand tools and sustained no damage to the crankshaft or tool itself, so will able to be used again and again for the future engine builds that I have lined up. Products to buy together - A key product to purchase that will allow for removal of the crankshaft at home is a crankcase splitter tool, it is designed to pull the crankcases apart and can also be used to push the crankshaft out of the crankcase. Difficulty of installation - The installation of the crankshaft assembly tool is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the crankshaft assembly tool between the crankshaft and crankcase. Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for but this is not the case the crankshaft assembly tool as it is more on par but specific for the Honda Grom and not a universal tool, which is great. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the crankshaft assembly tool, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA MONKEY125, Others , HONDA GB350S, HONDA GB350
It's just a piece.
It looks beautiful around the key box.
Once you put it on your bike, you'll want to put it on all the bikes you own.
It also prevents scratches on the key box.
View detail
It is easy to install.
Installation takes only one minute! View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50-PRO, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA MONKEY125, HONDA glom, HONDA SUPER CUBC125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
The look and feel changes quite a bit.
You know what I'm talking about, but install it when you change the Oil. (LOL) It looks more luxurious and better than the OEM product! View detail
Installation is exasperatingly Large strange.
If you work with the OEM Exhaust System, it will be very large and you need a universal joint tool. It might be faster to remove the Exhaust System first. By the way, even if you install the OEM Exhaust System, you can't see the installed parts when you look at it from the front (lol). View detail