Reviews
Only the positioning bothers me.
In the meantime, I am worried about positioning.
The Tank itself is rounded, From this line ??mm" It is difficult to decide on something like Quantity:Pair (for Left and Right) I thought I had it exactly in the same position, but when I straddled it after applying it, it was a little Quantity.:Pair (for Left and Right) There's a difference … and so on.
The center part is aligned from the end of the Seat and overlaps the logo mark, so the back part is aligned from the front of the vehicle and placed under the Seat.
I think if a simple positioning jig or something was included, I would have been able to apply it accurately without worrying.
In terms of performance, it is quite Good thing you put it up." Before I put it on, my feet used to slip off the tank even if I did a knee grip, but after I put it on, I can do a firm knee grip and it is very good.
I thought the Black Rubber on the Silver Tank would stand out, but personally I think it looks rather better with a bit of Accent.
I wrote about the pasting, but overall I am satisfied with it.
View detail
Good thin
It is expensive but well made.
It's not Decoration bumpy like Stomp Grip, so it doesn't hurt even if you wear thin clothes.
I use it in CircuitMain, so I use Leather suit to grip my knees, but it is very effective in preventing slipping.
It is even thinner from XL to XL2, so it is more user-friendly.
View detail
f900xr Fits
Cover the part that takes Rider and Contact. The texture of the rubber is good, and the adhesive tape, which can be reapplied, is also very good. The size is a bit large, so I prefer it that way. It is good that it does not get scratched. View detail
Stable knee grip.
I bought this for the R1250RT and Tank Pad as well as to prevent scratches on the Tank Part, as it is the only type of car that can only be machined Universal Product.
I bought two this time to cover a large area. It turned out to be quite a Gold amount….
Nevertheless. XLine." The grip force of the "Grip" is high, allowing for a stable knee grip and secure inner thigh placement.
The surface is textured like #320 Sandpaper, but unlike Sandpaper, it is naturally not shaved, so there is less damage to the Wear.
Also, the base is about 6mm thick urethane, so the fit is good. If it were skin, the impression would be hard.
Repositionable. The disadvantage is that the adhesive strength drops considerably once it is peeled off, and it is easy to peel off if it is not degreased properly even the first time. Also, be careful not to peel off the adhesive too tightly.
It is better to use a thick blade even with a Cutter Knife.
View detail
It's not so bad!
The texture is very luxurious! The feel is also very good. View detail
Makes it more comfortable to keep the chin down when tucked.
Having your chin on the tank is very vibration heavy and this helps minimize that when trying to stay tucked unter a bike's windscreen. Might not be a perfect fit due to the shape of your bike's tank, but the adhesive and the softness of the material make it easy to stick. View detail
The picture fooled me.
In the picture it looks like a 3-piece set with Center and both Sides, but in fact there are only 2 Sides without Center. I had to buy an OEM Center pad. View detail
Focus on function rather than appearance.
Having used TECSpecifications on my previous Versys 650, I had no hesitation in going with TECSpecifications on the MT09sp.
Grip is good enough for Circuit.
It's also Exactly because it's cut specifically for your car model.
I know many people don't like the black look, but a transparent Pad is more likely to show dirt. Also, TECSpecifications will not peel off even in the summer.
It's easy to apply.
After degreasing the parts with PartsCleaner, simply position them with masking tape and stick them on.
The Grip Pads on the SIDE were good, but the Tank Pad was too long, so I had to cut it to fit.
View detail
feel well
It's nice. It's not cheap and has the right texture.
If you put it on the curved surface of the tank, it will come off, so we recommend you to fix it firmly with strong double-sided tape of 3?etc.
View detail
Good-looking is a Large thing.
I installed it on 2020 YZF-R1.
warp and woof
R1 is a five-piece Quantity:The Tank Pad of the Set is already out, and I bought it, and Quantity:Pair (for Left and Right) I had already installed the Tank Pad on my ZX-6R, but I decided to use the Tank Pad for the Center part, so I bought it again and put it on the Center.
good point
It is thick and has a reliable performance as anti-slip.
I used to run Circuit back in the days of the ZX-6R, and even after 6 years, I was able to use it without having to replace it once because it never peeled off or lost performance.
I'm not worried about durability at all.
A bad point
Well, there is nothing special about it, but if I had to say something, I would say that the size is universal, so it may not necessarily fit the tank shape of your motorcycle.
In fact, it was a little difficult to put it on the tank shape of R1, but it's okay because it's cool.
After that, you may feel some Oil smell at first.
However, the smell will disappear within a month or so, so I don't think you need to be that nervous.
View detail
It's going to be a tight grip
The SCRAMBLER 800 had a slippery knee grip, so I bought a Tank Pad
I thought Design was great!
I don't know if the price is low or high I bought it without comparing it to others
Tank Pad is for the middle part and both SIDE parts, and I bought it for knee grip, so I can use it for both Installed for SIDE portion only
Impressively, it looks like you can get a pretty chunky knee grip
View detail
It works as expected
I have installed a high seat on the K1300S
This high seat slopes forward
So I bought it with the purpose of improving my Grip strength
It was installed with Dryer while warming it up in season
And today I ran it, and it felt just as grippy as I'd hoped
Help prevent slips!
View detail
Whenever possible, it's better to choose another product
Review erased, so I added it and reposted it
It's going to get erased again anyway …
The one I received was badly stained by White
It was degreased and stuck on, and two days later it came off when I rode the Motorcycle
Peeled areas have no adhesive strength and cannot be reused
Avoid this product unless you're really good at it
View detail
Hey, this is bad
I received one that was dirty or white in places
This is terrible I can't help but wonder how they sell this as new I have nothing to complain about
I think I'd rather have the inexpensive crackers on sale at a certain Ok or amazon
View detail
high
I'm very happy with the functionality, I'll be putting it on whenever I buy a motorcycle, even in Jeans The design is also simple and easy to use I think it will match any motorcycle But it's still expensive View detail
techspec
Very convenient gas tank cover. Using the side covers, I decided to install the central cover for the sake of completeness. material - rubber with a thickness of about 4mm, the pattern allows you to better grip the gas tank. the installation is very simple. PS: I am very pleased with the purchase of the Very comfortable pad on the gas tank. I use the side covers decided to complete the picture, and set the center plate. material - rubber about 4 mm thick, drawing allows to hold the gas tank better. installation is very simple. PS: I am very pleased with the purchase (translated by Google Translator) View detail
To your own form
Mounting on Kawasaki EX-4.
Because there is no dedicated Pattern like a popular car because of Minor car, we need to clip this Universal Product by yourself. Contents are two Knee grip parts (Quantity : Pair (for Left and Right) Quantity : 1pc. Tax Pad min Quantity : 1pc. There are 3 pieces in total.
Also, I was worried about how to clip it, but politely the pattern paper entered about 8 Pattern, Copy the fixed form and make both sides.
Left clipped from the pasting surface, Right from the pad surface side and cut out. I was able to be good at 100 Universal Scissor. Then clean up Tank with Parts cleaner, paste it and finish it.
OEMSeat slips anyway, so the body moves before Breaking. With this GripSeat, it will be much better.. (Seat's slippery one will be reassigned)
I used it even at the time of 6R, but I can hold it with confidence without slipping on a thin Pants. It is recommended that you can hold Hold with confidence because there is a feeling that it is griping even in Pants of the thick ground!
By the way there are plenty of cutouts left, but if you are dissatisfied with Knee grip, you can get through with additional, so I will set aside.
View detail
Size does not match for TL 1000 S
Even if the price is a little too high, it is quite tough that the dimensions do not match and protrude from the recessed part of Tank and peel off from the part of the Rear surface.
It seems to be TL common design, is it because Tank shape is different between TL 1000 R and TL 1000 S.
I think that it is better to buy Universal Product if honest processing is necessary.
I'm satisfied with the Grip ability, Knee grip works well on jeans.
View detail
I slid with leather bread.
I usually ride on leather bread, but this Tank Pad slipped.
I have not tried it with jeans or Riding Pants, so I do not know..
I decided to exchange it without much use. I'm sorry.
View detail
The body does not slip and it is easy to hold the car body
The texture of slip stopper Rubber was as expected.
As it is hard it is hard to stick, so warm it with Heat gun and soften it, align firmly and turn the Seal halfway and paste while aligning it is easy to stick.
Because model Exclusive Design, shape is also Exactly.
However, adhesiveness is somewhat weak because it can be re-tensioned. After a while it came floating that there was a tough place of bending. Heat gun firmly stuck when warming and pressing it.
It is very good as Tank's Knee grip can be tightened and devoted to control of the car body.
View detail