Reviews
CGC CGC160 Square Flasher
I had installed the Square Type Black Clear Lens on my Motorcycle about 40 years ago and I wanted to buy it. I wanted the Square TypeBlack Clear Lens and was able to purchase it this time! I would buy it again as a Spare item, as it is a very reliable Brand that I personally trust. View detail
Replaced due to deterioration
I replaced the Blinker I bought about 30 years ago when the bulb went out, and I also replaced this one while I was replacing the Valve. I will be over 80 years old when I replace them next time. View detail
It is also good to have a spare set.
Three days before the touring, Prank destroyed my Lens, but I was able to go on the tour without any problems because I had a spare Lens in stock. It is recommended to stock it because it is a cheap part. View detail
KATANA's standard
It takes a little ingenuity to install, but once it is in place, it becomes a familiar style. View detail
The color is ….
I bought it because it was supposed to be black, but it has a deep greenish color and a slightly dove-colored feel….
If it's Black, I want it to be made properly Black.
View detail
Quantity in different colors:I bought 2 sets!
[How is it used?
I have purchased the Clear Lens type and I like it so much that I also purchased the Orthodox Orange lens type!
Was the one you received as per Image?
Yes
Was the installation difficult?
A little modification is required, but if you have a special bracket, which is made by another company, you can bolt it on.
How was your experience with it?
I use it without any problem at all.
[Included Parts:were they on?
Light bulbs are sold separately.
[Was there anything that disappointed you?
Bulb is Quantity:I wanted it to be a Set.
View detail
It is very Beauty at night!
I came across this in my search for a Blinker that has Position lamp functionality in a SmallEngine Displacement Volume car.
The price is reasonable and yesterday is adequate.
The Clear Lens as well as the LED Pokition Lamp are very Beauty.
The installation was a bit large because of the extra LEDs in the wiring, but I was able to get away with it.
It has been in use for more than 2 years.
View detail
New ones have different elasticity.
I replaced it as a precaution because I don't want it to harden after years of use and water intrusion. The new one has a different elasticity and gives me a sense of security. View detail
Aging
It is good to be able to purchase Lens only because the Blinker lens I have been using for a long time is cracking due to age-related deterioration.
If you want, you can use Rubber packing for Quantity:It would be better if it was in Set.
View detail
Beauty Up
It had a Crack chip so I replaced it. The new one is bright, dark and tight in color. View detail
European
In the past, I always changed Mirror or Blinker.
Mirror is AzMirror and Blinker is European.
Chiyoda continues to be released in the age of harmony.
With this Blinker, you'll be transported to the 1980s.
This is a gem of a product that I hope will always be on the market.
View detail
Easy to use
It is a little difficult to install, but the texture and feel is good.
This product can be unlocked with a key and the key can be removed.
To lock, simply engage the Helmet and push in.
With other products, you can't remove the key until you unlock the lock with the key.
Helmet is in the way and it's hard to operate the key.
Like this product, you can insert the key only when you want to unlock the door.
It is more convenient to use the one that can pull out the key that could be released.
View detail
It helps prevent theft
VIRAGO to Standard Equipment Helmet holder Plusα in
I bought another one to put on the Handlebar side!
You can lock the door with one touch without a key
Good You don't have to lock it up again to hang a Helmet
I'm using it as an alternative to the Oku-Hook
Plating is clean and not rusted after 2 years, so the quality is good
I think
View detail
Well it's OK as the price
Blinker 's Valve that had been attached to sr 400 has expired and I searched for Valve but I found this in an unusual type and installed this item by exchange for each Blinker.
It works well with 12v21w.
Making, Blinker Cover is Plastic, Body is iron? Aluminum? I think that it is reasonable or somewhat better.
View detail
Double Bulb does not include
I bought it as Front blinker but I can not install Double Bulb's Valve.
This Blinker's Socket for Double Bulb is not on sale and the Space in Blinker is too Limit and it was not possible to install Double Bulb in the first place.
Perhaps it was my own responsibility that I did not investigate well, but I was disappointed just because I wanted to attach a Position lamp ...
On the back of Case there was a description of the installation of Double Bulb, so I misunderstood that it is obvious.
View detail
Regardless of the thing of the LEED industry
I was out of the LEED industry that became out of print
Square TypeBlinker's for Repair
Compared with Original
The details are different
Parts that do not come out as out of print
It really helps selling down
If you say the difference between Original and here
The color of Lens is somewhat different
Original is LEED to LensTOP
This one is different from writing it as CGC
Other than packing from CGC
I would like to make a purchase if it is out
View detail
I purchased it with LEAD Industrial Square TypeBlinker for Repair
It was sold normally more than 20 years ago
LEAD Industry Square TypeBlinker Lens
I bought it as a substitute because it broke
Size is the same as Square Type, so it can be used
I checked the color only in the room
Since it is the same Orange color, there is no discomfort
Because the LEAD industry's Lens does not come out
To say that you can get me out
It is truly grateful.
View detail
I am useful.
Since the Helmet Holter of YAMAHA XJ 6 F can not be used unless Seat is removed, I tried using this product.
Installation was Pipe thick and included Bolt short, so purchased and installed 30 mm Bolt at Home center.
Installation is very easy.
I used it for a year, but Plating has no problem.
Key hole seems to be rusty.
It's free to install, it can be devised so that it does not get in the way, and Touring is useful too.
There are exclusive items by car model, but this product is enough.
View detail
Is not it All aluminum, is not it?
using "DAYTONA" Since Rust started out to Ms. Blinker bolt, I tried to get this item as a substitute.
In the product name "Aluminum" It certainly says the Gold color part like Aluminum.
However, the Bolt part where the Screw mountain is cut has magnificently magnets attached.
Since the part that is visible is like Aluminum, I think it is difficult to attach to the eyes even if it is Rust, but I am hesitating to wear it yet.
For those who can divide that point, you can Recommendation.
View detail
no problem.
It is fashionable making it compact.
As light bulbs use something pretty small, you need to buy something different from OEM bulbs.
(That was the case with my GB 250 CLUBMAN. )
View detail