• Home
  • Product reviews
  • Search reviews
steps-review.png
Filter
icon-webike.png
Write a review and get Webike Points!

Reviews
XSR125 Clear all
Fat Type Cable Adjuster
SP Takegawa
Fat Type Cable Adjuster

Fits: Others , YAMAHA XSR125, HONDA MONKEY125, YAMAHA YZF-R125, YAMAHA MT-125, HONDA CL250

NO NAME
5/5

The wonderful design of the cable adjuster does wonders increasing the appeal of the Monkey 125

About quality and texture - The cable adjuster fat type from SP Takegawa is made from billet aluminium with precision machining and a black anodized surface finish while the quality from the overall fit and finish is perfect. About the feeling of use - The wonderful design of the cable adjuster does wonders increasing the appeal of the Monkey 125 by allowing the removal of the original zinc coated and less then ideal cable adjuster from Honda. Products to buy together - A key product to purchase to further increase the appeal of the Monkey 125 by the removal of more of the less then ideal original parts, would be the noticably large front fork guards that are available in a slimmer aluminium finish from a few aftermarket suppliers. Difficulty of installation - The installation of the cable adjuster is a simple task that took 0.3 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is all that is required to release the tension off the clutch cable, fit the cable adjuster to the clutch perch and re-tension the clutch cable. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the cable adjuster is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the cable adjuster, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic. View detail

DIABLO ROSSO IV [110/70 R 17 M/C TL 54H] Diablo Rosso IV Tire
PIRELLI
DIABLO ROSSO IV [110/70 R 17 M/C TL 54H] Diablo Rosso IV Tire

Fits: BENELLI TRK251, BENELLI TRK251, BENELLI Leoncino250, BENELLI Leoncino250, BMW F650CS, BMW F650CS, BMW G310R, BMW G310R, BMW G310R, BMW G310R, HONDA CB-1, HONDA CB-1, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250

Japanese Webike user
installed on
5/5

Grip feeling

The first Fee Ring to be replaced was He's nettlesome.\" It might be easier to understand if we say.
Of course, it is not really sticky, but the information transmitted from the Tire has improved.
Life is not sure yet, but we think it was a good choice. View detail

Sonic Handguard PC Kit [Universal]
ZETA
Sonic Handguard PC Kit [Universal]

Fits: HONDA GB350 S, HONDA CB400 SUPER FOUR, HUSQVARNA VITPILEN 401, HONDA DAX125, HONDA TRAIL125, HONDA CT125, HONDA CT125, HONDA CC110, HONDA CB250R, HONDA GB350, YAMAHA XSR125, HUSQVARNA SVARTPILEN 401, HUSQVARNA VITPILEN 701, SUZUKI GSX-S1000GT, HONDA CB1000R, HONDA NT1100, HONDA CB1300 SUPER FOUR, SUZUKI KATANA, HUSQVARNA SVARTPILEN 701

Japanese Webike user
installed on
5/5

Handlebar Cover is attached.

I bought it to protect my lever because I keep falling down, and also to put a Rough AndRoad Handlebar Cover on it in the winter. (The Handlebar Cover is Large, so a Lever Guard is required). It took a while to install (file work), but it went on beautifully. View detail

Heat Grip TYPE-ROLL
SP Takegawa
Heat Grip TYPE-ROLL

Fits: Others , YAMAHA XSR125, YAMAHA YZF-R125, YAMAHA MT-125, HONDA MONKEY125

Japanese Webike user
installed on
5/5

mild

It is warmer than I expected, the 5-stage switch works well, and I am very satisfied with the low price. The included parts such as Tie Band and Double-sided Tape are also practical and easy to install. View detail

Swingarm Stand Hook M6
BABYFACE
Swingarm Stand Hook M6

Fits: Others , YAMAHA MT-10, YAMAHA YZF-R1, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-09, YAMAHA XSR900, YAMAHA XSR900GP, YAMAHA YZF-R7, YAMAHA XSR125, YAMAHA MT-125

Japanese Webike user
installed on
5/5

Stand Hook for XSR900 RN80J

The cosmetics are not very cosmetic for this type of product, but the quality is high for the price. If you like Baby Face, I recommend it.
It has been well used and is working well as a STAND Hook. I recommend it because it is affordable and customizable. View detail

Compact Half Cover [Medium]
DAYTONA
Compact Half Cover [Medium]

Fits: その他 , YAMAHA MT-09, YAMAHA NMAX, HONDA XR50Motard, HONDA NSRMini, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GS125 KATANA, SUZUKI GN125E, SUZUKI RGV250γ SP, SUZUKI Gixxer 150., KAWASAKI Z250FT, SUZUKI RGV250γ-SPII, SUZUKI RGV250γ-SP, SUZUKI RGV250γ, SUZUKI RGV250γ, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI NZ250S

Japanese Webike user
installed on
5/5

It can be used quickly and easily at touring destinations.

It can also be used in case of sudden rain while on the road.
Compact and portable. View detail

T-REVmini SPKit
TERAMOTO
T-REVmini SPKit

Fits: YAMAHA XSR125, YAMAHA MT-125

Japanese Webike user
installed on
2/5

xsr125

Acceleration is a little better, but the installation is larger than expected. View detail

Oil Filter Element
K-PIT
Oil Filter Element

Fits: YAMAHA BirdCity 300, YAMAHA MAJESTY 250, YAMAHA MAJESTY 250, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA MAJESTY 250, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250S, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA YZ250F, YAMAHA XT250X

Japanese Webike user
installed on
3/5

Regular Filter

This is an ordinary Oil Filter.
It works fine View detail

Airflow seat cover
SP Takegawa
Airflow seat cover

Fits: KAWASAKI KLX125, KAWASAKI D-TRACKER125, HONDA XR50Motard, HONDA XR100Motard, Others , HONDA DAX125, YAMAHA XSR125, HONDA CL250, HONDA DAX125

Japanese Webike user
installed on
4/5

Difficulty with rainwater seepage.

I bought the OEM parts to make the tear less noticeable because the Seat had started to tear after more than 10 years since I bought my KLX125 and I wanted to buy OEM parts but they were out of stock.
Since it is not an OEM product, it was not able to be placed on the seat as it is, so we made use of cable ties and managed to make it fit the seat.
The tear was not noticeable and the original purpose was achieved, but the drawback is that water soaks through the mesh and waterproof pants are necessary after a rain.
It feels reasonably cool in the summer. View detail

machine bendedGP-MAGNUMCYCLONE EXPORT SPEC Japan Government Certificated
YOSHIMURA
machine bendedGP-MAGNUMCYCLONE EXPORT SPEC Japan Government Certificated

Fits: YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA MT-125, YAMAHA XSR125

Japanese Webike user
installed on
5/5

Good bass sound typical of YOSHIMURA

The bass sound is very pleasant, which is typical of YOSHIMURA, and makes city touring more enjoyable. View detail

Heat Grip TYPE-ROLL
SP Takegawa
Heat Grip TYPE-ROLL

Fits: Others , YAMAHA XSR125, YAMAHA YZF-R125, YAMAHA MT-125, HONDA MONKEY125

Japanese Webike user
installed on
5/5

The easiest of all Grip heaters

[How is it used?
I had never used a Grip heater before, but I was looking for a Grip heater to rely on the benefits of civilization.
At any rate, I'm looking for a lot of things without knowing at all which one to choose, and personally, the following Points are all I'm looking for [Color] I was looking for something I could Clear.
Wrap-around Type, removable at any time
USB power supply
Temperature control
Since we have multiple vehicles, we chose the least expensive and least time-consuming USB power supply that can be replaced in case of emergency, and this product was selected.
This is a product of SP Mukawa Brand, but it can be used with basically any Motorcycle as long as it has a 12V USB Socket.

Was the one you received as per Image?
The configuration is quite Simple as shown in the product image and description.
The width is 100mm, but it is enough to cover the entire palm of the hand normally.

Was the installation difficult?
I think it is the easiest Grip heater to install.
Connect USB to Heater's Wiring. (Tool unnecessary) After fixing the Heater to the Grip with Magic tape, simply plug it into the USB power supply and you are done.
The only thing you need is a Scissors or Nipper to cut the Tie Wrap that keeps the Wiring neatly together.
Quantity:Pair (for Left and Right) There is no particular identification of the "I" and anyone can really do it.

How was your experience with it?
With temperatures in the mid 10's Celsius, Mesh Gloves feel warm enough even in the middle Yellow color.
When I set it to the strongest Red color, I even thought my palms were a little hot, so it was definitely effective.
I use two USB ports, and of course, there was no problem with the operation even when I charged my phone ect. while using the Grip heater at its strongest.
Temperature control is also easy to understand both operationally and visually, as the color changes when the Button in the USBConnector section is flicked.
There was no slipping or shifting at all, and once I got used to the operation, I felt no particular discomfort.

[Included Parts:were they on?
There is nothing in particular needed other than this product as long as it is powered by USB.

[Was there anything that disappointed you?
Wiring is a bit long.
Usually, motorcycles have a USB power supply near the Top Bridge, so there is more than 1m of wiring left over.
Also, the non-slip rubber part of the Heater's surface may not be molded well enough to prevent slipping. I think there is not much difference in functionality whether it is there or not.

【Review】
Since the temperature control is located in the USBConnector section, it cannot be completely hidden, but I am concerned about rainy days.
It is safe with SP Mukawa Brand and recommended for those who want to add a Grip heater most easily anyway and already have a USB Socket. View detail

Motorcycle Cover SIMPLE L Size
DAYTONA
Motorcycle Cover SIMPLE L Size

Fits: YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER S, DUCATI 1098

Japanese Webike user
installed on
4/5

Just size

Just size, inexpensive, and easy to use. The fabric is thin, so I'm not sure about its durability, but since it is inexpensive, I think it will be easy to replace it with a repeat purchase if it deteriorates. View detail

Meter Protection Film
SP Takegawa
Meter Protection Film

Fits: YAMAHA XSR125

Japanese Webike user
installed on
2/5

Difficult to apply and Film Material is easy to tear.

Water application is essential, but even so, it was difficult to adjust the position and the adhesive was so strong that it was difficult to get air bubbles and remaining moisture out. The material was so soft that the surface became wavy and visibility of the Meter was poor. I think this film is not strong enough in terms of protecting the surface. View detail

Sonic Hand Guard [Universal]
ZETA
Sonic Hand Guard [Universal]

Fits: HUSQVARNA VITPILEN 701, HUSQVARNA SVARTPILEN 701, HUSQVARNA VITPILEN 401, HUSQVARNA SVARTPILEN 401, YAMAHA XSR125, SUZUKI GSX-S1000GT, SUZUKI KATANA, HONDA CB1300 SUPER FOUR, HONDA NT1100, HONDA CB1000R, HONDA CB400 SUPER FOUR, HONDA GB350 S, HONDA GB350, HONDA CB250R, HONDA DAX125, HONDA TRAIL125, HONDA CT125, HONDA CT125, HONDA CC110

Japanese Webike user
installed on
2/5

XC+ledFlasher was not supported

I bought this product to stop only at the Bar End because the Armor Handguard BendType makes wiring a bit of a mess. I couldn't find anything about it on DirtFreak's website or in the product description on webike, but there was a note on the box with a *. I'm sorry…I'll have to put a board on the hand guard and offset it, but I'm worried about the delivery of the wiring. View detail

SPORTMAX Q5A [110/70R17M 54H] SportsMax Cue Five A Tire
DUNLOP
SPORTMAX Q5A [110/70R17M 54H] SportsMax Cue Five A Tire

Fits: SUZUKI GSX-R400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI GOOSE350, SUZUKI WOLF250, SUZUKI WOLF250, SUZUKI RGV250 (Gamma), SUZUKI RGV250 (Gamma), SUZUKI RGV250 (Gamma), SUZUKI GSX-R250/R, SUZUKI GSX250S KATANA, SUZUKI GSX250FX, SUZUKI GSX250FX, SUZUKI GOOSE250, SUZUKI COBRA, SUZUKI BANDIT250, SUZUKI BANDIT250

Japanese Webike user
installed on
2/5

Tire replacement

No Quickness compared to α14. Handlebar feels heavy.
Just for Front replacement? View detail

Swing Arm/Stand Hook
BABYFACE
Swing Arm/Stand Hook

Fits: Others , YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R1, YAMAHA MT-10, YAMAHA MT-09, YAMAHA XSR900, YAMAHA XSR900GP, YAMAHA YZF-R7, YAMAHA XSR125, YAMAHA MT-125

Japanese Webike user
installed on
5/5

Good texture and security for Wound.

I often use the maintenance stand for maintenance around the rear, especially for cleaning the chain and wheels, but I have had many experiences of it interfering with the swing arm and damaging it, even if I was careful when hanging it on the stand hook. I chose this product which has a plastic flange.
I feel that my work efficiency has improved, perhaps because I now have a sense of security in knowing that the maintenance system is guarded, rather than having to fearfully adjust the maintenance stand while checking for interference many times before.
It is an expensive product as a Stand Hook, but I think its texture matches the color of the Swing Arm of the XSR900GP. View detail

Heat Grip TYPE-ROLL
SP Takegawa
Heat Grip TYPE-ROLL

Fits: Others , YAMAHA XSR125, YAMAHA YZF-R125, YAMAHA MT-125, HONDA MONKEY125

Japanese Webike user
installed on
5/5

Easy and convenient to install and remove.

Magic tape and USB make installation and removal easy and convenient.
There was no Gapping while driving.
Off car, you can use it in the morning with it on, remove it when playing in the woods, and put it back on on the way back. View detail

Hyper Ignition Coil
SP Takegawa
Hyper Ignition Coil

Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX, YAMAHA NMAX155, YAMAHA XSR125, YAMAHA MT-125, YAMAHA YZF-R125

Japanese Webike user
installed on
5/5

Installation on BWS125 SED9J

The installation was a little delayed after purchase, but it is now complete and will be reviewed.

Since the CYGNUS is a sibling of the CYGNUS, installation was not particularly difficult, and the plug cap on the end was separately replaced with one from KN Kikaku that supports dama terminals.

After installation, I feel that the startability and torque feel has improved due to the fact that the MOTOPlug was also replaced at the same time.

If I may say so, it would have been nice to have a choice of colors.

The length was slightly cut to match the OEM Length.

I think it is also good as spare parts, especially since it can be used with NORMAL without any difference. View detail

Oil Filler Cap Type-FB
YOSHIMURA
Oil Filler Cap Type-FB

Fits: YAMAHA WR250R, KAWASAKI Z900, KAWASAKI NINJA250SL, HONDA CRF250M, HONDA CBR600RR, HONDA CBR1000RR, HONDA CB400SF, HONDA CB1100, HONDA Super Cub 110, HONDA Dax125, HONDA CL250, KAWASAKI Ninja650, YAMAHA WR250X, HONDA CBR250RR, KAWASAKI Ninja ZX-4R SE, HONDA CT125, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250 RALLY, HONDA CRF250L

Magichippo01
installed on
5/5

Good for track use if you require safety wire

I recently installed the Yoshimura Oil Filler Cap Type-FB on my Kawasaki ZX-4R, and here’s my review: About quality and texture The quality of the Yoshimura Oil Filler Cap is excellent. It’s made from durable materials, and the finish is smooth with a nice Yoshimura logo engraved on it. It looks high-end and adds a bit of a premium feel to the engine area. It doesnt come with a new O-ring though. About the feeling of use The cap feels solid and well-made. It fits perfectly and securely, so I have no worries about leaks. Plus, it comes pre-drilled for safety wire, which is a great feature if you’re using it for track days or just want extra security. Products to buy together I would recommend pairing this with other Yoshimura parts, like their bar ends or frame sliders, to keep the look consistent across your bike. It’s a nice touch to have matching pieces. Difficulty of installation The installation was super easy. You’ll need a 14mm socket to tighten it properly, and it only took me a couple of minutes to install. No special tools needed, and it fit perfectly with my ZX-4R. Cost performance and comparison with other products It’s a bit more expensive than basic oil caps, but the quality and design are well worth the price. Compared to cheaper options, the Yoshimura cap feels more solid and gives the bike a cleaner, custom look. About shipping and packaging Shipping was fast, and the packaging was great. The oil cap came in a small, well-protected box, so it arrived in perfect condition without any scratches or dents. Any concerns, cautions, or advice when purchasing My only advice is to make sure you have the 14mm socket ready for installation. Also, the pre-drilled hole for safety wire is a great bonus if you’re into track riding. Overall, it’s a small but excellent upgrade for the ZX-4R, both in terms of function and appearance. I’m really happy with it! View detail

KAROO STREET [140/70-17M/CTL 66SM+S] Tire
METZELER
KAROO STREET [140/70-17M/CTL 66SM+S] Tire

Fits: HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA XR400 Motard, HONDA XR400 Motard, HONDA XR400 Motard, HONDA NIGHTHAWK750, HONDA CB400FOUR (water-cooled), HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA CB400SF, HONDA CB400SF, HONDA VTR250, HONDA VTR250, HONDA VTR250

Japanese Webike user
installed on
4/5

CARU STREET

Pattern is Parenthesis, Life is about 20,000km, Dirt is only about 10km, but it's a good way to eat. View detail