Reviews
Fits: KAWASAKI Ninja H2, KAWASAKI ZRX1100, KAWASAKI ZXR750R, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1200, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZRX1200
Exquisitely made
Beautifly made this wheel spindle is jewel like its so nicely finished, I'm delighted with it as it finishes off my new front end, it complements the high quality Ohlins forks, Dymag carbon wheels and Brembo brakes that I have chosen for my motorcycle restoration, It has the feeling of an expensive watch its so nicely made, Simple to install and a very high quality and expensive 22mm hex driver is included with the shaft, This Shaft is extremely good value in my opinion, i look forward to testing it when my build is finished, Perfectly packaged and the shipping from Japan was on time, I have also ordered the JB POWER rear axle shaft and the JB POWER swingarm pivot shaft, Webike is my favorite source for parts and accessories even though I am thousands of miles away in Ireland. View detail
Great looking stainless spokes, cheaper than what is available in the US.
I purchased these spokes to build some wheels for my cb350. The cheapest I could find spokes for this application in the US cost $141USD. These were less than $100 shipped. Once they got here I began building the wheel and it went together well. I ordered some more spokes for the rear wheel. The front was sold out with no immediate indication on when they would be available or I would have purchased some for a second set that I am building. Great product for the money. Ask me in a year how rust resistant they are. View detail
Getting the Center out is the hard part.
I was prepared for BALI and Small scratches, but I can't get the Center without modifying the Brake Panel side.
I also bought a 4mm Sprocket spacer but I think it will be useless.
Also, there is some distortion, so if you want to assemble it tightly, we recommend a reasonable price.
View detail
Fits: HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CT125CT110 HUNTER CUB
Cospa is good
Since the price is Reasonable, I put it on the Front of CROSS CUB JA60. I put it on the front of CROSS CUB JA60 because the price is reasonable. If the front fork is removed once and reassembled with total torque, it may become smoother. I think that the Axle should be greased up at a large angle since neither the front, rear, nor swing arm shafts are greased up on the new car. View detail
It cannot be pontooned. But Rim width is Quantity:Pair (for Left and Right) I like the fact that it's all even, etc.
I purchased Front 3.5J and Rear 4J. Please be careful. Personally, I think that the depth of the rim is more than enough.:Pair (for Left and Right) I bought it knowingly because I didn't want it to be a "one-size-fits-all" type of arm. If you want to mount it on your car, you should use KITACO or GKURA's Quantity.:It is better to buy a Set product. View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB, HONDA SUPER CUBC125, HONDA SUPER CUBC125
Ideal for a dress-up look on your feet!
Disc Rotor was replaced along with the replacement of the Disc Rotor.
We chose Gold to match the Rotor, so it has a good sense of unity.
View detail
Fits: HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CT125CT110 HUNTER CUB
maybe
I don't know if it is smooth or not due to the grease. If the Torque of the Axle Shaft is too tight, it will give resistance to the bearing brace, so it is hard to say. Recently, I think the Torque is too strong when shipped from the manufacturer. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS
Performance as expected
[How is it used?
Front axle shaft of Z900RS
Was the one you received as per Image?
It is just like the Image and has the JBPower Logo on it, which gives it a high quality feel.
Was the installation difficult?
Installation at Kawasaki Plaza
How was your experience with it?
The vehicle body became lighter when handling.
Also, it gave me a chunky feeling when changing lanes.
There are other Brand products that are more expensive, but I think this one will give you a good experience.
View detail
Improved Rear behavior
I replaced the rear axle shaft for the last time after the front and pivot shafts, so here are my impressions.
#The Rear axle shaft that had been in there before had no particular rust, and the Grease had not been cut.
Two points for the body.
Rear tire rotation is smoother (or feels smoother).
Rear tire is turning straight (without yaw gap).
First, I felt the Rear tire spinning smoothly around the axis.
My impression is that Bearing is working properly.
The difference between an Axel with low engine noise and one with constant speed or coasting with the clutch turned off is quite noticeable.
It is only a guess, but I think that the shaft diameter has become closer to the bearing inner diameter and the surface roughness height has become more uniform, making it more difficult for the bearing inner ring to move (so that the balls can move properly).
If # of miles have been done to some extent, the effect may be felt more if Bearing replacement is done together.
Next, a reduction in Rear blurring was felt.
I had a KOODPivot shaft and OVER swing arm on it as of before the replacement,
When Throttle was operated roughly, there was a sensation of yawing on the Sprocket side.
I was wondering if the rigidity of the connection around the Pivot and the Swing Arm had increased, causing the Frame to deflect, but after replacing the Rear axle shaft, this has disappeared.
This may also be due to the fact that the Clearance inside the Shaft and Bearing is now Tight, reducing Tire shake (clockwise Gap of the Tire when viewed from above).
View detail
perfectly clear
I used it with KH's FrontDisk offset.
There was no rattling when I installed it, and the dimensions were perfect! I think this will prevent the wheel from shaking.
If I had to complain, I would say that it would be perfect if a little meat was removed. The lighter the suspension, the better.
Based on that, I think it is a highly accurate product.
View detail
Safe and secure JAPAN!
I often ride my car in the rain, and this bearing is resistant to rain and does not deteriorate easily! I strongly recommend replacing the OEM wheel bearing of Ninja250SL, which was cut by CostCut and the quality is not so good (laugh), because you can really feel the good performance of this bearing! The price is also lower than OEM! View detail
Fits: YAMAHA WR450F, YAMAHA YZ250FX, YAMAHA YZ250X
The colors are very Beauty.
[How is it used?
I wanted to improve the parenthesis of my KDX220 wheel for city driving and was looking for aluminum rims on Webike when I found this product, so I released hanghang savings gold and purchased it.
Since this is a RimSingle Body product, used hubs and new spokes were purchased separately for both front and rear and assembled.
How did you like it?
Buyer's driving skills are also low. I want to make Parenthesis look good." I can't give you a functional review of the product (e.g., "Compared to NORMAL, the XXXX is □□□ when XXXX is XXXX"), because I purchased it with the impure motive that "I can't give you a functional review of the product.
StrongRim" prioritizes unparalleled rigidity.
AMASuper cross, the new model aluminum rimsD.I.D D DirtStar, boasts an overwhelming installation rate at all Japan Motocross events. "ST-X Strong" The "RIMBODY" has a strong RimBody that can withstand hard surfaces, and while it is more than 30% stiffer than the average OEM Rim for Motocross competition machines, the weight increase is within 10%, providing outstanding traction performance and improved drivability on hard surfaces. The result is a competition-specific reinforced aluminum rims that offers outstanding traction performance and improved drivability on hard surfaces. The description of the rims reads as follows.
What I can write as my personal opinion is It looks super cool!" It's as if I bought it just for that!
How did it compare to other products?
The Z-WHEEL was the comparison for this product when I purchased it, but at the time of purchase, Blue's Aluminum rims were Out of stock. It was.
I bought it on the spur of the moment because it was out of stock when I wanted it, and although the price was a little high, I bought it on the spur of the moment out of greed. I have no regrets at all after assembling it, installing it in my vehicle, looking at it, test driving it, and looking at it again during breaks.
the same "Blue" But there are subtle differences in color depending on each Manufacturer's Anodized Treatment. DID's Blue is a little darker and has a vivid transparency that I really like.
[Points to note]
Although the adhesion is stronger than that of paint, there is a possibility that wounds may appear on the surface if the work is done roughly.
If you want to keep the beauty as long as possible, we recommend using a UV-cut body cover or storing the garments indoors, such as in a garage.
Other items that would be helpful
The deciding factor in the purchase
Luckily for us, it was during Sale. "price" The reliability of the product, and the fact that Yamaha is the OEM manufacturer.
[How is it used?
I am afraid that Blue alumite wheel is too good for parenthesis and I am too poor to use it only for street riding because I am afraid of damaging it.
【Included Parts:presence or absence】.
Rim and something like a warranty card are sent in a corrugated ball.
[ITEMS TO BUY TOGETHER
Hub or Spoke to be replaced.
If the hubs are transplanted from Wheels in good condition, there is no problem, but if they are old hubs, Bearingetc. should be replaced.
After installing the hubs and spokes, distortion and balance must be corrected, and a wheel balancer or nipple wrench is also needed (if your friend etc. has one, you may want to borrow it).
DIY work takes a lot of time and effort, and to be honest, it is tedious. If you are not confident or don't have the time, it may be better to leave it to a professional. (Labor charges will be added separately.) 。
Opinions and requests to Manufacturer.
We would like to order the product in other color variations than Black and Blue if possible.
View detail
Fits: HUSABERG FE650, HUSABERG FE250-650, HUSABERG FE250, HONDA CRF450RX, HONDA CRF450R, HONDA CRF250R, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ450F, KAWASAKI KLX650, KAWASAKI KLX450R, KAWASAKI KLX300R, KAWASAKI KLX250SR, KAWASAKI KLX250SR, KAWASAKI KLX250R (for competition), KAWASAKI KLX250ES, KAWASAKI KLX250, KAWASAKI KDX250SR
They are a welcome addition to the relatively inexpensive market.
[How is it used?
It was decided to separate the SEROW225 WE wheel for mountain riding from the wheel for city riding, and since the rim for city riding is not easily scratched, it was decided to use the SEROW225 WE wheel for city riding. If we're going to go to the trouble, let's replace it with a colored Rim." and decided to use a Material with a slightly lower price.:I was looking for a color Rim for Aluminum and came across this product.
Since the Rear wheel is TubelessSpec. from SEROW225 WE, it is a deceptive Custom Start to reduce expenses by sticking RimDecal on the Rear and buying only Front rim.
How did you like it?
I have been using it without any problems and have not experienced any troubles at this point.
The following is a detailed discussion.
The aluminum rims are beautiful enough when seen from the outside with the tires installed, but the reverse side of the rim is a little more beautiful. (Tire mounting side) has solid weld marks and the welds are slightly distorted. (This is a part that only the person who does the assembly work would understand.) These are the areas that differentiate us from DID's and RK's slightly more expensive Rim.
However, conversely, if we consider that the price is reduced by omitting some processing of details that do not cause problems in use, it can be said that this is a product that is appreciated by the user.
How did it compare to other products?
Like I wrote above. The Finish Difference." If you don't mind that, I think you will be able to accept it without problems.
Color variations are also available. Silver, Black, Red, Blue, Green Light The variety of products is abundant and should meet the needs of most people.
The color of the product I purchased this time was black, so it is difficult to distinguish the difference in color. However, the color of blue and green light may differ slightly from one manufacturer to another, so I recommend that you check the actual product before purchasing if possible.
[Points to note]
Although the adhesion is stronger than that of paint, it is inevitable that wounds will appear on the surface if the work is done carelessly.
Other items that would be helpful
The deciding factor in the purchase
The price is by far the lowest among Aluminum rims with Anodized staining!
[How is it used?
SEROW225 WE for mountain play "For city driving." The Wheel is used as the Wheel of the
As I mentioned above, I can't use Universal Product for the Rear hole, so MDF's OffRim sticker. is pasted to match the front and rear Image.
【Included Parts:presence or absence】.
RimBody and something like a light warranty is Quantity:1 pc., sent in corrugated ball.
[ITEMS TO BUY TOGETHER
*More than anything else, it takes a lot of time and effort. If you are not confident, it may be better to leave it to PRO. (Labor charges will be added separately.) 。
If you are assembling a new Wheel. Hub." Ya Spoke." is required, not necessary if only the Rim of the existing Wheel set is to be replaced.
If the wheel is a transplant from a wheel in good condition, there is no problem, but if it is an old one, take this opportunity to replace the bearingetc. of the hub, and the Spoke should be new as much as possible.
After assembly, distortion and balance must be corrected, and a balancer and nipple wrench are also needed.
Opinions and requests to Manufacturer.
I can't say enough good things about the price and the variety of color variations.
View detail
Fits: YAMAHA YZ125, YAMAHA WR450F, YAMAHA YZ250
The footwear is tightened.
[How is it used?
I was looking for a wheel rim for city riding and for mountain riding, and I found this product on Webike, so I bought it after consulting with Wallet.
Well, RimSingle Body was not going to do the job, so after it arrived, I diligently assembled the used hubs and new Spoke.
How did you like it?
Sorry to be the first.
I also feel thinly that the manufacturer is probably researching and developing materials and forming methods to develop products with good performance.
However The Eternal Beginner. I can't give you a performance review as I have not improved my driving skills as a driver.
Looks Super Cool!
It's as if I bought it just for that! (The item in question was also on sale at Webike's Large size.)
How did it compare to other products?
The Z-WHEEL was the comparison for this product when I purchased it, but at the time of purchase, Blue's Aluminum rims were Out of stock. It was.
When I wanted it, it was out of stock, so I bought it with a lot of enthusiasm, even if the price was a little bit higher! But after assembling it and installing it in the car, I have no regrets at all.
the same "Blue" The DID's Blue is a little darker and has a vivid transparency, so there is nothing to complain about.
[Points to note]
Although the adhesion is stronger than that of paint, it is inevitable that wounds will appear on the surface if the work is done carelessly.
If you want to keep the beauty as long as possible, we recommend using a UV-cut body cover or storing the garments indoors, such as in a garage.
Other items that would be helpful
The deciding factor in the purchase
for being in Sale. "price" The reliability of the product, and the fact that Yamaha is using it as an OEM.
[How is it used?
Blue alumite Wheels are too good for Parenthesis and I use them almost exclusively for city driving.
Originally, the effect might be confirmed during mountain play or difficult place Attack...........................
【Included Parts:presence or absence】.
Rim and something like a warranty card are sent in a corrugated ball.
[ITEMS TO BUY TOGETHER
Hub or Spoke to be replaced.
If it is a transplant from a Wheel in good condition, there is no problem, but if it is an old one, this is a good opportunity to replace the Bearingetc. as well.
After installing the hub and Spoke, distortion and balance must be corrected, and a Balancer or Nipple wrench is also needed.
Above all, it takes a lot of time and effort. If you are not confident, you may want to leave it to PRO. (Labor charges will be added separately.) 。
Opinions and requests to Manufacturer.
Although demand may be low, we would appreciate color variations other than Black and Blue.
View detail
Wow!
More than impressed, these wheels are perfect, in every way. Almost too good for a roadbike, but absolutely made up I bought them. Very happy. View detail
If you are looking for cheapness, this is it.
Product Name
BATTLE FACTORY Battle factory Balance weight
Item Number
BA00-033
Vehicles
MT-09 ABS (8BL-RN69J) 2021
Number of man-hours
5 minutes (when attaching Tire replacement)
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect (when changing tires)
Why did you choose this product?
Because it was necessary for balance adjustment at the time of Tire replacement.
Was the one you received as per Image?
It was as per Image. It was more frugal than I expected.
Was the installation difficult?
It is not particularly difficult, since all you have to do is stick it on. Cutting may be difficult with ordinary scissors.
How was your experience with it?
It is difficult for the layman to know if Balance has been taken. It is a matter of feeling.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
I would have been happy with Black color.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
We recommend replacing the Wheel before it becomes distorted.
[How is it used?
I am playing Enduro with CRF125F.
I had heard that the Rim of NORMALCRF125F was often dented, so I was planning to replace the Rim someday, and changed it with Timing, which is a Tire replacement.
ZETA is the standard wheel for CRF125 F, but I bought AGAT Utility wheels because the CRF125F riders around me said that AGAT Utility wheels are of better quality.
Was the one you received as per Image?
As you know, CRF125F's normal rim is silver, and AGAT Utility's is black.
Was the installation difficult?
I did not do the installation myself, so I do not know how difficult it is, but it should not be that difficult for those who can apply Spoke.
Spoke, Brake Disc, Drum brake, etc. are OEM products that came with the product, so the additional items purchased were BEETStopper×Quantity:2pc. It is about Set.
Tire was also changed to NORMAL for FTire and MX14 for RTire.
How was your experience with it?
You can't see that much difference when driving, but the vehicle is now tighter and cooler.
The Rim probably does not deform as much as in NORMAL, even in galleys.
View detail
BlackRim in Aluminum
[How is it used?
It is installed and running.
Was the one you received as per Image?
When I bought the product, it was listed as having two bead stopper holes, so I prepared two bead stoppers and was looking forward to using them, but there was only one hole, which was disappointing.
Was the installation difficult?
I think Large sturdy if you have patience.
How was your experience with it?
I honestly don't know what it is, but it's cool.
[Included Parts:were they on?
Spoke and Nipple
[Was there anything that disappointed you?
As I mentioned above, there is no such thing as a listing error. This is the second time with WeBig. This time I gave up because I noticed it after assembly. Please send the extra Bead stopper by cash on delivery. It is too much of a hassle and has become an object in my house.
I was satisfied with the Rim itself, but it was quite a magazine to deal with WeBig.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
The suspension does indeed move.
I have been interested in this product for a long time, but I was hesitant to purchase it because of its high price. I think the NORMAL ASKUL was the right choice by chance. I think the NORMAL ASKUL was the right choice by chance, but I will continue to use it because it is certainly better. View detail
...................m View detail