Reviews
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R SE, KAWASAKI NINJA ZX-4RR
This is a good one.
[How is it used?
Mountain to City Riding
Was the one you received as per Image?
Street Image
Was the installation difficult?
Throw to Motorcycle shop
How was your experience with it?
Nice, Front's is Recommendation.
[Included Parts:were they on?
Sticker available
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI Z1000 (water-cooled)
I bought it...
I finally got my hands on Wheel!
And in Marchesini!
At first I was thinking about GALE SPEED or OZ RACING.
Over the past year, Wheel has gone up in price considerably and Gale has lost its value for money.
OZ RACING has become more expensive than Marchesini
470,000 yen for standard Anodized Color, 550,000 yen for Paint
Too expensive.
Marchesini the King in his own value system, the nobleman OZ
I felt like a commoner GALE SPEED.
If they undercut that and the price exceeds Marchesini's, I'd choose Marchesini.
And GALE SPEED's Brand power is inevitably weak compared to other niManufacturers.
Add $140,000 to Gail's GP1S and you'll be promoted to Marchesini.
That Marchesini didn't like 7 Spokes at first and shunned it.
See, 360 degrees around the circle is not divisible by 7.
This means that somewhere out of the seven, there is a disproportionate etc.
It's kind of creepy, isn't it?
The price and design lightly erase such thoughts, a lack of conviction.
As a result, I chose Marchesini's M7RS over Gale and OZ.
Review from here
I knew it was lightweight, but when you actually ride it, it changes more than you can imagine.
The forging and thin Rim make the GYRO effect much weaker.
It feels like the head goes in and falls down without the action of bending it.
It's so light that I'm afraid it's going to fall over as it is.
To be honest, I've seen a lot of these reviews and sometimes I wondered how they could change like that.
I can feel the difference when I feel it. Even I, an insensitive person, can feel the difference so far, so I guess normal people can see the difference, can't they?
There's Merit, of course, but there's also the downside of the lighter weight and reduced GYRO effect.
First of all, straight line stability is reduced, if not to the point of dizzying.
I get the sense that there's something unsettling about it.
I wonder if it is noticeable when the speed exceeds 100 km/h.
Also, Small Gap is transmitted as vibration.
This is thought to be due to the fact that the lighter weight is not fully absorbed and transmitted.
Maybe once you get used to this area, you won't mind.
Also, I've seen a few reviews here and there that say it's often springy.
I think I can solve the Large one by setting up the suspension.
The place where the Wheel was installed has various know-hows and
I didn't have the feeling that I'd be hosed if they did the Setup for now.
It looks good, performs well, and you won't regret buying it.
I myself bought it 80% on looks, so it's unlikely to be effective.
I think it is very effective Large for people who drive fast and furious on mountain roads.
View detail
Ideal for fall prevention
The product is good, but WeBig's shipping is good and very good.
Companies A and R are slow to purchase from inventory and are not counted on.
View detail
It is a quintessential KOOD product!
Smooth movement of the vehicle and lightness of the Wheel's rotation were immediately apparent after installation.
It is pricey, but I am glad I replaced it.
The Rear side was replaced at the same time as the Front side was replaced.
The appearance of KOOD products clearly shows how well they are made.
View detail
It is a quintessential KOOD product!
Smooth movement of the vehicle and lightness of the Wheel's rotation were immediately apparent after installation.
It is pricey, but I am glad I replaced it.
View detail
Excelent lightweight CNC axle collar set for the GROM from Kitaco!
A very lightweight CNC axle collar set for the Honda MSX/GROM from Kitaco. A good way to reduce the weight of the bike while also improving the looks as well! The quality is excelent as usual from KITACO products! View detail
Fits: HONDA dachshund, HONDA Shirley.
OEM Equivalent Product
The front hub bearings were sticking and the shaft axle was worn, so we replaced them with new bearings. The paint was very good and the bearings were already greased up, so it was just a matter of assembly. View detail
Front axle replacement
I had no idea that replacing the Axle Shaft would make such a difference. View detail
It was very good!
The price is low, but the quality is very high and I had no problems at all with the installation.
I am considering purchasing another bottle in Stock!
View detail
Fits: HONDA CB750 Fore (CB750K), HONDA CB750 Fore (CB750K), HONDA CB750 Fore (CB750K)
HayashiCasting
Hayashi Casting is indeed cool. View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 MkII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled)
Z1R
We replaced it with an external MagTanWheel at the same time. It may not look the same at a glance, but I think my car is happy when the details are cleaned up. View detail
It will be clean.
As is the fate of spoke wheels, no matter how hard you try to take care of them, over the years, rust will become noticeable on the wheel rim and hub, especially on the spoke.
The Spoke can be polished to some extent by Bonnstar or PIKAL, or if the Tire and Tube can be removed and the Bearing is to be replaced, the entire Wheel can be soaked in rust remover. However, in the end, the best way to clean the Spoke is to replace it with a new one.
There are no quality problems and it is very clean.
but the Rim group was very Large strange because it was the first time to work on it.
If you just want to assemble it, you can refer to the pictures you took before disassembling it.
Since there is no run-out machine, it is temporarily assembled on the jack-up car body, and several Tie Wraps are attached to the car body, and the upper and lower Quantities:Pair (for Left and Right) It's a steady process of tightening the screws.
To be honest, I didn't want to do it again, so much so that I thought I would ask a contractor to do it next time.
However, it was worth the effort, and when it is done, it is very beautiful. It is a new product, so of course I am very satisfied with the finished product.
Since the price is also there, it is a Recommendation for those who are familiar with Spoke groups and want to try Challenge, but otherwise, it is better to request Large Human Shops.
The work is Large strange, but the product itself is very satisfactory.
The model used is an xlr80, but since the front is customized and crm80 wheels are used on the xlr80, the hubs and rims are also crm ones.
View detail
Fits: SUZUKI GS1000, SUZUKI GSX-R1100
Used on a 91 M model
'91 Replaced from OEM GSX-R1100.
I am very satisfied with the quality of the product as it is a replacement for dress-up purposes.
However, it is a little disappointing that so many Screw sections appear and give a sense of excess.
View detail
Used on a 91 M model
'91 Replaced from OEM GSX-R1100.
The'89-'90 designations are the same in terms of shaft diameter and construction, so they can also be used with'91 inverted.
Is the front tightly felt? I think so, but only to the extent that I feel it.
I am satisfied with the quality of the product as it is a replacement based on appearance rather than performance.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI ZRX1100, KAWASAKI ZXR750R, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1200, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZRX1200, KAWASAKI ZRX1200
Exquisitely made
Beautifly made this wheel spindle is jewel like its so nicely finished, I'm delighted with it as it finishes off my new front end, it complements the high quality Ohlins forks, Dymag carbon wheels and Brembo brakes that I have chosen for my motorcycle restoration, It has the feeling of an expensive watch its so nicely made, Simple to install and a very high quality and expensive 22mm hex driver is included with the shaft, This Shaft is extremely good value in my opinion, i look forward to testing it when my build is finished, Perfectly packaged and the shipping from Japan was on time, I have also ordered the JB POWER rear axle shaft and the JB POWER swingarm pivot shaft, Webike is my favorite source for parts and accessories even though I am thousands of miles away in Ireland. View detail
Fits: YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ426F, YAMAHA YZ400F, YAMAHA YZ400F, YAMAHA YZ250X, YAMAHA YZ250WR, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA YZ125, YAMAHA WR450F, YAMAHA WR426F, YAMAHA WR400F, YAMAHA WR400F, YAMAHA WR250R
Z -WHEEL Aluminum nipples kx250 Front
Cost performance is better than OEM.
Nipple head (Rim side) is huge, so
Large amount of pop out from Rim
When installing the Tire, the BEET was not falling enough.
Tire is a little hard to fit
View detail
Great looking stainless spokes, cheaper than what is available in the US.
I purchased these spokes to build some wheels for my cb350. The cheapest I could find spokes for this application in the US cost $141USD. These were less than $100 shipped. Once they got here I began building the wheel and it went together well. I ordered some more spokes for the rear wheel. The front was sold out with no immediate indication on when they would be available or I would have purchased some for a second set that I am building. Great product for the money. Ask me in a year how rust resistant they are. View detail
Getting the Center out is the hard part.
I was prepared for BALI and Small scratches, but I can't get the Center without modifying the Brake Panel side.
I also bought a 4mm Sprocket spacer but I think it will be useless.
Also, there is some distortion, so if you want to assemble it tightly, we recommend a reasonable price.
View detail
Fits: HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CT125CT110 HUNTER CUB
Cospa is good
Since the price is Reasonable, I put it on the Front of CROSS CUB JA60. I put it on the front of CROSS CUB JA60 because the price is reasonable. If the front fork is removed once and reassembled with total torque, it may become smoother. I think that the Axle should be greased up at a large angle since neither the front, rear, nor swing arm shafts are greased up on the new car. View detail
It cannot be pontooned. But Rim width is Quantity:Pair (for Left and Right) I like the fact that it's all even, etc.
I purchased Front 3.5J and Rear 4J. Please be careful. Personally, I think that the depth of the rim is more than enough.:Pair (for Left and Right) I bought it knowingly because I didn't want it to be a "one-size-fits-all" type of arm. If you want to mount it on your car, you should use KITACO or GKURA's Quantity.:It is better to buy a Set product. View detail