Reviews
Fits: YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR450F
It doesn't fit
It is not compatible with YZ250FX2023MODEL, though it is compatible with YZ250FX2023MODEL.
I have removed the NORMAL White Ring as per the instruction manual, but it is not attached.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
There was a Gasoline leak.
Previously, I bought it from another company and it was leaking after about 5 years.
I have been driving MONKEY for about 13 years and this was the third time I had to replace it.
View detail
High Quality Hose
This NTB hose is very high quality. It comes in a sealed package and is cut perfectly. I have used this hose as a tank breather for a GSXR 1000 R after EVAP removal. The hose fits perfectly to the tank breather fitting as can be seen in the picture. You get 1 metre which is more than enough for this type of application The price is also very good, especially for the quality. I will be buying this hose again Recommended View detail
Fits: HONDA Shirley 50.
CHALY s Cook was broken.
CHALY I purchased this product because the Cook of Last time I had another CHALY I purchased this product in the first place and had no problems at all, so I purchased it again. View detail
Brilliant, quick delivery
Fast order quick delivery , top quality product I have made another order already . I've ordered a seat for my bike and currently look to purchase other parts ,very good View detail
Rubber hose is consumable!
[How is it used?
Used for SUZUKI/CHOINORI Fuel Hose and Negative Pressure Hose.
I purchased this product to replace the hose that had been attached to my car because it had deteriorated over time.
How was your experience with it?
It is brand new Rubber so it is very soft.
Does this make it easier to get the fuel down? I think it has become easier.
How did it compare to other products?
We selected KIJIMA because it was the one with the lowest gold price, although other manufacturers also offer similar products.
I am glad to hear that it is working fine.
[Points to note]
You will be handling Gasoline, so be careful not to ignite it.
View detail
Fits: HARLEY-DAVIDSON 1/2-inchesHose compatible
Used for Repair!
I replaced it because it was rusty and shabby; I've been using it for about a year now and I'm happy with it, especially since it hasn't rusted. View detail
It is a must for older Motorcycles.
For older Motorcycles, it is a must.
The easy installation and low price are highly appreciated.
View detail
Filter part is pricey
If you want to put a Filter between the Fuel lines, it is difficult to bend the Hose if it is short, but if it is angled like this product, it will be neat. View detail
Fine items are helpful.
Since rubber packing and grommets like this are consumable items, it would be great if you could have a better selection.
I haven't replaced it yet.
I would like to see Fuel Cap Packing for Z1R made soon.
View detail
BRC BRC Fuel Cock
Gasoline capacity was low, so I switched to Reserve and it started leaking.
Is it the life of the O-ring?
It's a 1994, so it's a no-brainer... I'm relieved to replace it... ♪
View detail
I wonder if I need it to replace the carburetor on the CUB.
Since the replacement of the carburetor in the CUB forced us to replace the cook with an OEM fuel cock carburetor, we had a little choice and thought about it.
(1) 2 system Cook replacement
(2) No Cook with Tank set to Custom.
(3) No Cook with Tank as one line with After stuff.
(4) On/OffCook installation with one Tank system.
So, for now, we decided to just use Cook, which is cheap and doesn't cost a lot of money up front.
The mounting position was extended with Bracket and temporarily attached. It was usable as usual. Not bad for the price.
I just put it on, so I don't know how durable it is. Therefore, I gave it 1 star minus.
View detail
It is a must for older Motorcycles.
The device was installed on a KDX250SR.
Since it is an old Motorcycle, it is ideal for Tank's Rust defense.
View detail
PinGelCook
Shipping is on schedule!
I was able to place my order with peace of mind.
View detail
Used to supply Gasoline as a startup check
Installed between the connection from a simple Gasoline container to Carburetor to prevent CarburetorOverflow.
Effective without CarburetorOverflow after adding Filter.
View detail
Genuine Continental Fuel Hose
I do have a lot of bikes come in with really bad fuel lines for one reason or another and I always like to have some of this hanging around for just this reason. One bike in particular had the original stock line which was far from good and this bike was literally a few years old, 2020. Really rigid line was replaced with this. I do like Continental fuel hose as it is proven to work exactly as it should and not be too rigid but also has enough flex to be abnle to loop around weird placements. This was well priced from Webike and they also packed my order with great care so not to damage or bend this hose where it should not be bent. It came as a nice loop.The flexibility is excellent. A really nice fit to the clamp fitment too. Very pleased, thanks Webike. View detail
Durable!
Colorful and good looking Fuel hose. In the product description section Vulnerable to ultraviolet rays." It was stated that the Is it less durable?" I was convinced that it was a good idea to buy it, but I don't see much difference in durability between it and the OEM fuel hose. I am recommending this product because it looks very different and cool! View detail
Changed from negative pressure type to forced open/close type
[How is it used?
It was diverted to YamahaCHAPPY's Fuel Cock.
CHAPPY, as usual, uses the infamous Yamaha negative pressure cook.
Gasoline seeps out as soon as the packing is renewed, and even if it is turned on, it is not completely prevented, and it flows a little bit.
This time there was a fuel leak, and Packing does not have a part number, and those that do are very expensive, so we decided to use a forced-open/close type.
Was the one you received as per Image?
Photo
3-WAY Type with Reserve.
Was the installation difficult?
The Cook is located where it can be easily accessed from the outside, so replacement is easy.
This product has a screw cut out, but the body side also has a screw cut out, so if you are confident that you will never return to OEM, you can make the body side a penetrating hole.
Connect the Hose as described in the Instruction Manual, fasten the Clip, and you are done.
How was your experience with it?
It has only been installed for a short period of time, but it is working fine.
There is no lack of flow or oozing.
Cook can be opened and closed lightly.
[Included Parts:were they on?
This product only.
Hose and hose clipetc. should be prepared separately.
[Was there anything that disappointed you?
Not particularly
If I had to say so, I thought it would be easier to handle if the OUT side also had a Left exit.
【Review】
Cook OEM Parts (Packing) was higher than I expected and I was wondering what to do with it.
The same thing is available from various manufacturers, so frankly speaking, it does not have to be from DAYTONABrand.
View detail
For those who feel more comfortable seeing what's inside.
[How is it used?
I purchased this product to refresh the hose around the fuel cock and carburetor of a vehicle I have owned for many years, as they have begun to harden over time, while keeping costs down.
Thanks to the fact that the same parts were used in vehicles up until recently, OEM parts are available for hoses, but they are a bit expensive, and the price is a bit high. CostCut" "Where commercial products can be used, CostCut uses commercial products." So I checked Webike and found that KIJIMA's Hose was cheaper this time, so I bought it.
Was the one you received as per Image?
The familiar Clear pink Fuel Hose, a supple and flexible Fuel hose, which is natural since it is brand new.
Incidentally, the OEM fuel hose we had been using up until now had no cracks, but it had deteriorated over time and was in a bad shape, making us glad we replaced it.
How was your experience with it?
We replaced the above-mentioned CaChicatiHose with this flexible product and everything is better.
The part used is a Carburetor drain hose, and the new one is good.
[Points to note]
Several different sizes of HoseLineup are available in the same package, so be sure to check the inside diameter of the hose you want to replace and order the size that fits.
How did it compare to other products?
I have only used KITACO and KIJIMA products, but I think they are both similar products and there is no problem no matter which one you buy.
I feel that the pink clear type fuel hose hardens a little faster than the black rubber hose, etc. If you do not neglect daily maintenance, there is no problem, but for a lazy person like me, it is better to check it once a year or so. I felt it would be better for a lazy person like me to check it once a year.
Other items that would be helpful
Point and hang of installation
I am not sure if I am doing it the right way, but if I apply a small amount of silicon grease during installation and insert it into the cook, it works Smoothly.
As a matter of course, let's pass the Clip through the hose first before jointing the hose.
The most Large-picture work may be to insert it firmly and prevent it from coming loose with a firm hose band.
[ITEMS TO BUY TOGETHER
The inside diameter of the hose from the fuel cock and the hose around the carburetor may be different, so be sure to check the inside diameter of the hose that was originally installed before purchasing the appropriate product.
If the Fuel Hose is replaced with a new one, it may be better to purchase a new Hose clip (Hose Band) as well, considering its deterioration over time.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible, as it is necessary to replace the fuel hose on older motorcycles.
View detail
Very convenient!
I purchased the Tank when reviving it after more than 10 years of neglect, as I had many opportunities to take it off and on.
In conclusion, when you detach and detach the hose of Gasoline, there is no dribble of Gasoline and no damage to the hose.
It is very convenient to remove Joint with one hand.
Motorcycles, which rarely have the opportunity to remove and install the tank, may also have hardened fuel hoses,
I am considering installing it on my other Motorcycle as it seems cost effective.
View detail