Reviews
Fits: SUZUKI Mollet, SUZUKI SEPIA (SEPIA), SUZUKI SEPIA (SEPIA), SUZUKI SEPIA (SEPIA), SUZUKI SEPIA (SEPIA), SUZUKI SEPIA (SEPIA), SUZUKI SEPIA RS (SEPIA RS), SUZUKI SEPIA ZZ (SEPIA ZZ), SUZUKI SEPIA ZZ (SEPIA ZZ), SUZUKI SEPIA ZZ (SEPIA ZZ), SUZUKI SEPIA ZZ (SEPIA ZZ), SUZUKI SEPIA ZZ (SEPIA ZZ)
Good cosmetics! Frequent replacement is a good thing!
2-stroke motorcycles require frequent air filter replacements! No quality problems at all! View detail
FCR Carburetor Body to TMRMJN
Replaced from FCR Carburetor Body33.
Since I will be EngineBore up in the near future, I chose 38Φ of Large size.
Runs well enough with the plug in, but the plug is completely black. (Lol)
Smooth turning from bottom to top, no black smoke, but Plug is pure black. (Lol)
Compared to FCR Carburetor Body, but I think it is a very different carburetor.
Response is good and Axel seems lighter.
I have not been able to get Data on fuel consumption, but I don't think it is different from FCR Carburetor Body.
Installation is definitely easier with the FCR Carburetor Body.
TMR cannot be framed after Accelerator Wire.
Wire framing and then carburetor installation.
View detail
You can physically feel the horsepower increase.
I bought it thinking it would not work anyway, but after replacing it, the driving is totally different. It is easy to install. By the way, I am using the fine grit one, so I wonder what will happen if I change to the rough grit one. I am looking forward to it. Please see the official YouTube video of Mukawa for the installation. View detail
I don't know.
Used to replace an Air element that I don't know when I put it on.
It is also soaked in oil.
Above all, the price is cheap!
Performance seems fine to me.
And if it gets dirty, it can be cleaned.
View detail
Kitaco mikuni tm24 needle valve
Fast shipping,very accomodating,item is in good condition,original mikuni needle valve and the item is very secure.surely i will recomend this motorcycle site.and mostly i will order again..thank you so much and godbless View detail
It is a stable key Star.
It is a stable key Star.
If you get them individually, you can't afford such a Gold amount. (excluding Chinese imports)
One problem was that the gold needle hook connecting the Float and the Valve did not fit. I guess the carburetor body parts are different depending on the year.
View detail
Easy air screw adjuster for 2-stroke carburetors
I'm using a 1995 Vespa px150 two-stroke. I replaced the bike's outdated carburetor with a Keihin pwk28 because it was too old. Due to the carburetor's confined location, it is quite challenging to adjust the fuel and air, particularly the air adjustment screw. The length of the screw body has increased since KN Aluminium CNC air screw was replaced, making adjustment considerably simpler. It's simple for me to manually change. In addition, KN's air adjustment screw is made of aluminum so it is very light, beautiful and has many colors to choose. So I might be thinking about using all the KN carburetor accessories to decorate mine. View detail
Fits: SUZUKI address 125, SUZUKI address 125, SUZUKI address 125, SUZUKI address 125, SUZUKI Address V125S, SUZUKI Address V125S, SUZUKI Address V125SS, SUZUKI Address V125SS
DAYTONA Turbo filter
I bought it as part of the oil maintenance because the previous owner had not done much maintenance and the filter was starting to rot. View detail
Fits: HONDA CBR1000RR-R FIREBLADE, HONDA CBR1000RR-R FIREBLADE SP
I was finally able to replace it.
At first, I was naive. When I replaced it and ran the car, it was more than I expected.
It was transformed into a powerful driving experience. I was worried about the shape of the
The problem was also Large sturdy and fit properly in the Air cleaner box.
View detail
Fits: HONDA FTR223, HONDA NSF100, HONDA NSF100, HONDA XR250, KAWASAKI Zephyr 1100, SUZUKI 250SB, HONDA , HONDA CB750Four, KAWASAKI Z1 (900SUPER4)
YOSHIMURA's Review
High quality materials and craftsmanship:YOSHIMURA products are always of high quality, and this optional spigot is no exception. It is durable and provides reliable performance over a long period of time. View detail
good price product
I purchased it as a replacement for the genuine Benley 110. It's cheap, but you can't feel any difference from the genuine product.
I am very satisfied and intend to purchase again in the future.
I think it is advantageous to purchase multiple items. Thank you for selling a good product at a low price. -------------------------------------------------- -------- I purchased it as a replacement for the genuine Benley 110. It's cheap, but you can't feel any difference from the genuine product. I am very satisfied and intend to purchase again in the future. I think it is advantageous to purchase multiple items. Thank you for selling a good product at a low price. Powered by Google Translator
View detail
quick to respond
Satisfied with the build quality. The quick response time was very helpful. View detail
I used it with FCR Carburetor Body28.
It is for vm26, but I changed the Spigot and used it with FCR Carburetor Body28.
In the case of CHALY, you need to engage a 6mm Spacer made by GCraft or Minimoto under the Manifold or it will hit the Frame.
As a precaution, the inside of the Manifold should be cleaned well before use.
The Manifold I bought had visible Level chips on the inside.
View detail
Fits: その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Single Carburetor Horizontal (H/Z) Large
Thanks for the quick response to the damage during the Carburetor setting!
I am relieved that it is a KEIHINOriginal product.
However, it seems a bit expensive.
View detail
DAXAir cleaner
Good cosmetics,
Mounting Bracket Location OEM and
Spacers are not required because of the difference.
View detail
Prevention of Garbage and insect infestation
Oil catch tank Large air open hose installed.
I was always worried that a bug or something might get into it, so this is a relief.
It is Exactly to the OD of Bridgestone's 8mm I.D. Oil Resistant Hose.
View detail
Valuable company with a range of Parts to maintain your old Carburetor.
RG400 γ is also out of stock, as many OEM parts are out of stock, and the consumable parts such as Needle Jet and Jet Needle are also out of stock. Therefore, it is no longer possible to service the RG400 γ without using the parts made by Key Star. View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
The packaging is too messy for the shipping!
I thought the shipping cost was high for the parts, but since they are precision parts, I thought they were carefully packaged, but they sent the products in a Vinyl bag with no cushioning material and a single paper bag, which was a big surprise.
I can only hope that there are no deficiencies, but I am anxious and displeased.
The product may be trivial, but the buyer should be aware once again that he/she is paying a Gold for the product.
That's all
View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large
Replaced after 20 years of use.
I have not replaced this packing for almost 20 years since I purchased the FCR Carburetor Body.
The reason was that there was no problem without replacement.
This is not originally a place for Gasoline to seep in, but rather a packing to prevent Engine intake negative pressure from escaping from here.
However, this is not a place for intense negative pressure to begin with, since the only negative pressure here is the escape of pressure that could not be suppressed by the floating valve.
There is enough room to move normally even with the lid off here, such as during Idol.
However, it is not always possible to use a simple method, and if air is sucked in from here due to negative pressure, the setting will not be able to be issued.
I had been using it as it is because it is not something that suddenly breaks while driving or deteriorates suddenly one day, but I replaced it for the sake of refresh.
Before the replacement, there was no such thing as air biting and no setting... so nothing changed after the replacement, but just in case.
It is a paper packing with a very Showa-era smell, so it is interesting that there is a subtle taste to this kind of packing.
Well, maybe it already has a taste when it is called Carburetor.
If you soak them in oil before assembling, they will grow up to be reusable many times, but this is not the manufacturer's recommended method, so please do so at your own risk.
View detail
Fits: その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Single Carburetor Horizontal (H/Z) Large
Finally leaked after 20 years of purchase.
I have not replaced this packing for almost 20 years since I purchased the FCR Carburetor Body.
The reason is that it doesn't leak at all.
There is no seepage, so if it is Large sturdy, it is Large sturdy, and if it is Large sturdy, it is Large sturdy, and if it is Large sturdy, it is Large sturdy, and if it is Large sturdy, it is Large sturdy.
However, after 20 years, it finally leaked.
It may have shrunk because I had been draining Gasoline for a while, but when I ran Gasoline through it for the first time in 6 months, it started leaking to the point of dripping, so I had to replace it.
Float packing for KEIHINOEM's FCR Carburetor BodyLarge body, nothing special to say.
Since it is new, it has excellent elasticity, and its cross section is not deformed, so it is in an optimal condition with a slight protrusion when viewed from the side while fitted in the groove.
The seal surface of the float packing of the FCR Carburetor Body is not machined, and like other carburetors, the cast surface is left intact.
Since a cast skin means that the surface is bumpy in decoration, the flexibility of packing is Large.
It would be best to replace it periodically, but in reality, that's not always possible on public roads...
Instead, if even the slightest seepage occurs, it must be replaced immediately.
Compatible Bodies are marked mysteriously, but all FCR Carburetor Bodies can be used in common.
Small TypeBody/Large TypeBody, Horizontal/Down draft, there is no difference.
View detail