Reviews
DAYTONAusb power supply& voltmeter
Since I ride a Motorcycle with Touring as my main vehicle, a voltmeter is very useful for battery management.
The usb power supply is really useful when touring.
DAYTONA products are reliable and satisfactory.
View detail
USB Socket plugged in...
I think the slide style cap is great in terms of both gimmick and operation. However, since the SocketBody and the middle box are of a certain size, I could not pass through the small space around the Handlebar to hide the Wiring, and I had no desire to make it all Rose, so I ended up compromising. In this respect, it might be better to have an intermediate connector like other manufacturers, but it might cause contact failure, so it is a win-win situation.
The included parts are sufficient for most motorcycles, but a plain type terminal would have been a nice addition.
Test after installation is completed (using Anker USB Cable) After repeated unplugging and plugging several times, we were able to confirm that the device was energized. There was a feeling of being stuck until the device was energized, so there may have been something wrong with the molding of the USB Socket.
In any case, we are satisfied that the system is currently fully operational.
View detail
For power supply for the driver's recorder and smartphone.
For power supply for the driver's recorder/smartphone. It is not difficult to do if you have a tool that can reach deep enough. View detail
Necessary for extending power lines!
This wire is needed for the power line for DAYTONA's Radar to be a direct out instead of USB.
The KITACO power supply extraction unit is placed under the Rear Sets and wires are extended from there to the Front.
Wiring is a hassle, but once it's on, it's perfect!
View detail
It's best
Installation is so easy.
Just unplug the headlight and connect it to the blue service wire.
It fits perfectly with the Hunter Curve and has a good sense of unity.
The only downside is that it is not waterproof when it rains.
You need to quickly unplug the USB and close the lid.
It would be even more perfect if it was supplemented to make it waterproof even with USB installed.
thank you -------------------------------------------------- -------- Installation is so easy. Just unplug the headlight and connect it to the blue service wire. It fits perfectly with the Hunter Curve and has a good sense of unity. The only downside is that it is not waterproof when it rains. You need to quickly unplug the USB and close the lid. I think it would be even more perfect if it was supplemented to make it waterproof even when USB is installed. thank you Powered by Google Translator
View detail
Fits: Others
For phone charging +α.
[How is it used?
For securing power supply for smartphones and Cameraetc., which are now necessities.
I purchased the 2-port Type this time because I had previously installed 1 port of the same Type in another car model and found it very convenient.
The Grip heater was installed in the previous car model with a separate system, so we only needed to secure the power supply for the smartphone, but for this car model, we wanted to install a Grip heater of the wrap-around type that can be easily detached with a USB power supply, so we chose the 2-port I chose the 2-port type for the Grip heater and smartphone charging.
Was the one you received as per Image?
It is a Type that attaches to a Handlebar and is a Simple & RefreshingDesign that is compatible with both 22.2mmSize Handlebars and 25.4mmSize Handlebars, and is just like Image.
Was the installation difficult?
It is not too difficult because the Instruction Manual describes how to take out the power supply in several Patterns.
If you are not good with electrical systems, it is better to request a trusted friend or Shop.
How was your experience with it?
It is also able to charge my phone, and it functions properly when I charge the battery of my ActionCamera or use the electric pump (for Tire's Inflator) on the go, so the Large change is very useful.
[Included Parts:were they on?
It includes USB power supplyBodyBody, two RubberSpacer, Extension Harness, Branch Harness, Connector for wiring, and two Tie Bands, so it can be installed with only this product if you have a Large Mortgage Motorcycle. This product alone should be sufficient for installation on most large motorcycles.
[Was there anything that disappointed you?
None so far, how durable is the Rubber cap? I am curious.
0Other items that may be useful include
Point and hang of installation
Since it is a universal product, the waterproof cover (rubber lid) may not be able to be installed in the desired position depending on the treatment of excess wiring or the conditions around the handlebar depending on the type of car.
Let's devise and modify it well and install it in an easy-to-use position.
[Availability and clarity of the Instruction Manual
A simple but thorough Instruction Manual is included in the package. If you cannot understand it, do not hesitate to ask a friend who is good at electrics or a shop.
[Notes]
As mentioned above, do not force yourself to work on something you do not understand, or you may cause an unexpected trouble with the electrical system.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
I am concerned about the durability of the rubber cap for waterproof. I think it would be even better if you could devise another way or sell the rubber cap as repair parts.
View detail
OEM-like.
It was easy to attach without any processing required.
It looks and feels like it could be in an OEM.
View detail
I like that you can choose the number of Cigar sockets and USB in the Series.
A long time ago, the power source for additional electrical appliances for cars and motorcycles was mainly a cigar socket,
Recently I have been using more and more USBs, so I bought this product which allows me to do Wiring at once and use both at the same time.
For products that have been used for a long time or for products that require a constant power supply (e.g., a digital camera), we use a cigar socket. Cigar sockets that are left attached are reinforced with Vinyl Tape to prevent them from falling out.
(*When I installed it, I was in a daze and wired the + and − of the battery as per the instruction manual, and made the rudimentary mistake of turning up the battery while the power to the camera was still on. Please be careful.)
Each Wiring Cord is made long, so it is convenient to distribute the installation location. On the other hand, it is necessary to hide the excess cord when it is left over.
In the case of this product, there are a total of three connectors, but of course the total power consumption must be taken into consideration, so care should be taken not to use unnecessarily high power products. For this reason, if possible, it may be a good idea to always have a spare Fuse (MINIGlassTube Fuse 5A) on hand for touring. I wrote this as a reminder to myself.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO
USB power supply for Motorcycle
I bought it because I have a Smartphone Holder and wanted a USB power supply as well.
22Φ mounted on a Handlebar.
With Waterproof Cap.
View detail
To my friend's Motorcycle.
Ordered for installation on a friend's Motorcycle.
The installation went without any problems.
I was thinking that the tools would be a Drill and a Hole saw.
Hole saws are expensive to buy new, so if you don't have one, you should ask a Motorcycle shop for one.
View detail
A must for anyone who does Smartphone Navigation.
I had it installed at Shop before delivery.
I use my phone as Navigation and it is very useful.
I bought and use a short charging Cable of about 20 cm, and I recommend that you prepare it separately for your convenience.
In this day and age, I really want USB power supply to be a Standard Equipment for Motorcycle (laugh).
View detail
The lid can be conveniently closed with One push even while Gloved!
It is convenient to open and close the lid with one-touch while wearing thick gloves! View detail
For Grip heater
I bought this for my Grip heater and it is easy to install as long as you can remove the front cowl. I am satisfied with it. View detail
Separate handle car may be hard
I bought it to install on my Ninja ZX-25R, but there was no suitable space around the handlebar, so I gave up the idea of installing it.
I tried to attach it temporarily to the Multi Bar Holder, but the Unit is too big to be attached to the Handlebar.
Parenthesis bad, so I gave up completely.
However, it was a waste, so I installed it on my Ninja 250R.
The Ninja250R already had a USB power supply from another company installed, but we decided to replace it with this product.
The Ninja 250R handlebar has plenty of space to accommodate this product, so we were able to install it without any problems.
I installed it on the Left Side of the Handlebar, not sure if it will fit on the Right Side as I haven't tried it.
The installation went without problems because the ACC power supply was already branched.
No... there was one problem:the Male Bullet Terminal was already crimped, but the Bullet Terminal did not meet the standard.
I had to replace it with a Bullet Type Terminal that I have. It seems that the Smallest Bullet Terminal is used halfway.
View detail
Pimping on CL250
Many Universal USB power supplies are fastened with a plastic bracket or tie band, and I did not like the feeling of being retrofitted.
This product is large and a little bit obtrusive, but it does not bother me too much because it feels integrated with the Bolt On.
The wiring is the smallest and the bracket is made of gold and there is no vibration, etc. I am satisfied. I am satisfied with it.
Only Minus more expensive than Universal
View detail
Fits: Others
Exactly for Z900RS with a little modification
Without modification, the Mirror Holder will not fit snugly on the Mirror Holder due to interference with the Clutch.
It will be less than 2 cm away from the Mirror Holder.
If the parts on the headlight side are slightly modified as shown below, they can be attached exactly as shown in the photo.
(1) Shave off a little less than 2mm from the handlebar using a cutter file.
(2) Extend the hole where the Cable comes out downward by about 1 pc of Cable and shift the Cable downward.
I worked with Cutter, but you could melt it with a Solder iron or other heat.
The Mirror Holder looks like an OEM product when it's perfectly attached to the Mirror Holder, and it's very nice and discreet.
View detail
Fits: Others
This time, a bite of Type
We have purchased many similar USB wiring products from other manufacturers, but we chose DAYTONA this time as well. The instruction manual is easy to understand. The power supply is taken from the wire of the brake switch. The power supply is taken from the electric wire of the Brake switch.:It is also good to set the wires, but if you make a mistake, it will take a lot of time and effort to fix it. If you are a first-time user, you can use an Inspection Tester, which is sold for about 500 yen, to check the wire that is energized when the key is turned on.
The corner CUB CUSTOM has just the right amount of free space on the Left Side inside the Handlebar Cover, I put the Wiring and converter there. At first, I attached the USB to the LeftMirror with a bar for the phone and then used Included Parts:to install it. There was no particular problem, but it was noticeable, so I reattached it without using the Included Holder on the underside of the Handlebar Cover. The fixation is made with a small installation Holder made of aluminum plate and attached with a hard Magic tape. I thought it would be easier for those who do not use the attached holder if the area of the bottom of the USB port was a little wider.
It has been about a year since I installed it. I was worried about vibration etc., but I can charge my phone without any problem. I have not had any problems even when I wet it in the car wash. I open the cover when I use it and close it when not in use. I have it upside down, but it doesn't open by itself when not in use.
My CUB does a lot of strolling and choppy riding. I am glad I installed DAYTONA's USB, which is solid even when not in use.
View detail
It is easy to install.
It is a bit large, but it is separated from BrakeWiring, and the terminals are available as OEM, so it can be pimped out.
It is a little bit troublesome to remove the battery cover.
Tape is not included, so just wrap Wiring with Tape and secure with Tie Band.
I think that even someone who knows little about Wiring can put it on.
View detail
Durability Zero
I installed it in a GSX1100S and used it for a few days, then suddenly it became inoperable. I am extremely disappointed. View detail
Earth Issue
The product is very good, but the Wiring is correct by all means, but it did not energize.
I contacted KITACO directly and they told me that there was a case that it could be cured by re-installing the earth, so I re-installed the earth around the front cowl and the power went on. So, when you install the car, if the power does not come on even though the wiring is correct, I think it is a good idea to suspect the earth.
View detail