Reviews
Used with Babyface Change lever
The change lever of Babyface is divided into two parts, and the Flat Cap Boltm6 12mm is tightened by Screw lock+tightening the specified Torque.:2pc. We used a set to connect the two, but since it came off while driving, we thought it would be best to use a double nut stop, and since the reverse side of the lever would be tight with 12mm, we installed a longer 20mm and then fixed this product to the reverse side.
Nut texture is good and 4mm thin is the only one I know of.
If it were a little cheaper, it would help.
View detail
Thinnest lock nut known
The change lever of Babyface is divided into two parts, and the Flat Cap Boltm6 12mm is tightened by Screw lock+tightening the specified Torque.:2pc. The set was used to connect the two, but because it came off while driving, we thought it would be best to use a double nut to stop the nut, so we installed a longer 20mm nut than the 12mm nut that would be used for the double nut to fix the set.
This Nut is as thin as 4mm and with Lock.
It cannot be Torqueed strongly, but it is a very effective product.
Is it expensive?
View detail
This is the only m6Lock nut that is thin.
The change lever of Babyface is divided into two parts, and the Flat Cap Boltm612mm is tightened by Screw lock+tightening the specified Torque.:2pc. The set was used to connect the two, but since it came off while driving, we thought it would be best to use double nut fasteners, so we used the included 12mm to make the reverse side of the lever tight, so we used the longer 20mm to penetrate and installed this product.
Nut texture is good.
As far as I know, this is the only thin 4mm of m6Nut.
But it would help if it were a little cheaper.
View detail
Genuine Kitaco Well Nuts C550 M5 x P0.8 for spares
I wanted to get soem new well nuts in this size as I did not have any spares in the garage. I have not tried the Kitaco ones and at this price is was a no brainer. The price was really good and cheaper than some on the other brands I could get. I decided to get the Kitaco ones as I have had a few other parts from this brand and I am honestly, very impressed with how well they are made. With a couple of other items in my order, I had them all shipped using EMS and the package arrived in 5 days. Everything was well protected from any damage. The well nuts came in the Kitaco box packet and were well presented. They are a really neat part that everyone should have some spares as you just never know when you will need them. These were the M5 size and this is usually the size that fits with a lot of panelling on a lot of different models. They also fit a lot of factory screens too. The quality of these is not really easy to work out untli you actually use them. I did have a screen that needed a new well nut fitting so I used one of these. Definitely recommend them as they just work how thay should. None of the spinning of the thread and worked exceptionally. Very happy with these. View detail
Fits: DUCATI Multistrada 1200, DUCATI STREETFIGHTER, DUCATI 1098, DUCATI 1198, DUCATI 1199Panigale, DUCATI 1299Panigale, DUCATI DIAVEL, DUCATI Monster 1200, DUCATI Monster 1200R, DUCATI Multistrada 1260, DUCATI PANIGALE V4
Cannot be installed even though the car model is compatible.
The product cannot be installed even though it is compatible with the car model, and it just won't fit.
AELLA's other products also have high product prices but poor accuracy.
Future purchases are a consideration.
View detail
At the time of Screen replacement
I purchased this product because the well nut was Crack cracked due to deterioration when replacing the Screen.
Compatible with M5 well nut for all Kawasaki vehicles, and is a recommendation because it is more affordable than OEM products.
View detail
Black stainless
When replacing the disc with a new one, the lock nut for fixing was replaced with this Stainless black one.
It is a little pricey in terms of the number of units used, but I am satisfied with the appearance because it is rust-resistant Stainless Steel and Black, which makes it look beautiful.
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB 50, HONDA KITACO cylinder head compatible, HONDA APE 50, HONDA APE 100, HONDA XE series, HONDA CB Series, YAMAHA TT-R50E, YAMAHA TT-R125, KAWASAKI KSR110, KAWASAKI KLX110
Genuine Kitaco Titanium Nuts & Adjustment Screw Set for Yamaha TT-R125
The customer wanted to change out the adjustment screws for something a little more robust and they suggested the Kitaco titanium nut and adjustment screw set. I honestly did not know that Kitaco did titanium but I guess with the great parts they make, why not. The price was really good for what you actually get. With some other parts, I had my order shipped using EMS and arrives in perfect condition in 5 days from being shipped. The screw set came in the Kitaco box and was well presented. The machine work on these screws and the nut is excellent. The threads are all perfect with no burrs or weird edges. They fitted exactly as I expected. I am really impressed with Kitaco as a brand and will no doubt be looking at them for other parts. Thanks Webike. View detail
I appreciate that InchNut is available in 1pc. units.
I used this product to install DockingHardware on my 2000 XL883XL1200C SPORTSTER 1200. This time I used Nylon nut to prevent loosening, and the price was reasonable. View detail
BlackScrew
I purchased this to install a GIVI Top case. It looks tighter. View detail
Looks rust-resistant
I have not installed it yet, but the OEM bolt of SR400 has rusted, so I purchased this product expecting the Titanium bolt. The OEM bolt is tightened by Hexagonal Wrench, but this product is Hexagon Bolt, so I am worried if I can manage the torque in such a small space.
I would like to post an IMPRESSION after installation.
View detail
Stainless SteelBlack
Exhaust System Fixing Screws Material:When changing to Stainless Steel Black, the Nut was also changed to Flange Material.:We changed to Stainless SteelBlack. It looks good, is unobtrusive, and rust-resistant Stainless Steel. View detail
Stainless Steel
The nut used for fixing the exhaust system was changed to stainless steel to prevent rusting.
It looks beautiful and the fixation is nice.
View detail
For Screen fixation
Material:Well nut that is a Rubber product and should be replaced regularly.
This time I purchased it for fixing Cowl's Screen.
The rubber is hardened to the point of pushing after 30 years, so it would have to be replaced anyway, but the previous owner had tightened it so much that the well nut was deformed and would not come back.
Since it is very common to use M4-size well nuts to fix the screen, there is no problem with these well nuts without having to purchase expensive OEM parts.
Some universal well nuts are too thick for screen fixation, but NTB's well nut is the thinnest type among universal well nuts.
It is truly OEM compatible.
Conversely, well nuts used for fixing brackets of auxiliary equipment would have a thicker flange, making them somewhat unsuitable.
Unfortunately, the Screw that I thought was M4 was actually M5, and this product was not available.
It's all my fault that I couldn't use it, so I don't blame myself.
Well, maybe you'll use it sometime! Maybe!
View detail
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
Product # W-1741-058
To give a beautiful look to the motorcycle, I bought a set of bolts and washers made of stainless steel. Installation takes 5 minutes. Very good design overall. I was pleasantly surprised by the functional elaboration - this is the largest set of 12 parts at the lowest price. I recommend everyone to update their appearance. To give the motorcycle a beautiful look, I bought a set of stainless steel bolts and washers. Installation takes 5 minutes. Very good design overall. I was pleasantly surprised by the functional detail - this is the largest set of 12 pieces at the lowest price. I recommend everyone to update their appearance. View detail
Replacing a busted OEM
The OEM was not well because it had deteriorated and become buckled, so we replaced it.
Surprisingly, there are no options when trying to buy as many well nuts as I want in bulk, so that's a big help.
View detail
Fits: HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla].
Product # W-1741-058
This kit was purchased for the Honda Monkey. The original nuts were coated with oxide, the washers were slightly deformed. A solution to this problem was required. There have never been any questions about the quality of the cube parts, why when we saw this kit, we ordered it without hesitation. I really liked that the nuts on the outside turned out to be larger than the original ones, which had a positive effect not only on the appearance, but also would not have a deforming effect on the washers. The result exceeded all expectations! View detail
For M6, which seems to be available but is not so easy to find, and Flange thin type
Material:Well nut that is a Rubber product and should be replaced regularly.
It is often used for fixing Cowl screens, etc., but in recent vehicles, it seems to be widely used for various brackets and auxiliary equipment mounts.
Large holes can be absorbed by the rubber part, and there is no need to embed the nut in the fixed object.
In DUCATI, it began to be used extensively after 1990, and in the 1991 900SS, it is used in various places on various parts of the body.
It must have been so easy, because Cowl mount was well nut in all places!
The large cowl (and the Seat Cowl in the 900SL) is supported by a bolt called M6, which is a thicker bolt, but the receiving side of the frame is all well nuts.
Of course, M6 well nuts are sometimes used on domestic cars, but the overwhelming majority are M5 and M4 size, so there are not many types of M6 well nuts to choose from when looking for a universal product as a repair item for motorcycles.
In such a situation, this product is Exactly as UniversalWell nut of M6.
There are several types of wall thickness in the Flange section, and this is the thinnest type in NTB.
It is best suited for locations where the design does not consider fixing the object with a deformation of the Rubber of Flange, but simply uses it as an embedded Nut.
View detail
Stainless black
We replaced it with Stainless Steel for rust resistance and Black for good looks.
The product is good, but the price is a little high. I would appreciate it if it were cheaper.
We would like to replace the bolt as well, but there is no size available, so only the lock nut was replaced this time.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
CUB of Overhaul, incidentally.
CUB I bought this while I was at Overhaul of The price is cheap and stylish. View detail