Reviews
For Dress-up of Wheel
CB250R was finally delivered and I used it for Dress-up!
And it's easier to put it up before the Wheel gets dirty.
This time, I'm going to use this product, which is a little bit expensive.
After all, there is a large difference in the image between pasting and not pasting.
I do the same task 16 times, so by the end you get used to it. lol
I used a mild detergent to apply it.
However, I did apply a sticker without text at the end.
I think this is a slightly different Image.
I put up one picture and stopped.
View detail
Easy to Ime Chain
I want to brighten up the Tire section a bit,
To match Body's Red.
MDF Mirror red 6mm is attached.
I forgot to buy the Sticking Gauge for Rim Stripe, so I'll put it on by feel.
Well, I was able to do it just fine.
View detail
MDF Rim stripe 4M Red
Used for 10Inch wheel of ADDRESS V100
Selected because it was good to use it on the GSX-S of the Main vehicle.
You can choose the width of the rim sticker according to the vehicle Image.
This time, 4mm width is recommended as it tightens the foot.
View detail
MFDRim stripe for 14Inch 4M Candy blue
Used for Wheel of Car
We selected the 14inch wheel because it was a 14inch wheel, but if you want to use it for a wheel in a car, please use the 14inch wheel.
It seems to be correct to use 1Inch lower Size (In this case, it is better to select for 13Inch)
It is not impossible to put it on, but you need to be careful because there will not be much room at the joints.
View detail
Beautiful and hard to peel off! Easy to immeChain!
Convenient for when you want to immeChain a bit! Very beautiful!
It is well made, hard to peel off and easy to apply!
It's nice that there is a spare in the package for misapplication!
Hold on to the Rim tape until you change the Wheel. (Lol)
View detail
A few mistakes can be deceptive.
There are 6 pieces on each of the Both Sides (3 pieces on One Side and 6 pieces on the Both Sides, front and back), making a total of 12 pieces in one set.
For each Decal, I could tell which way to put FR FL RR RL on the edge.
Three Decals make a circle, but the Decals need to have some space between each other.
The black color on both ends of the decals and the gaps between them make it almost impossible to tell if there is a slight gap between the top and bottom, or if the gaps are different for each decal.
Recommended for RimDecal beginners.
The price is not cheap, but it was a few thousand yen higher than the price of Decal, a somewhat better quality product on Amazon, so we purchased OEM.
I purchased the Red Decal to match the Motorcycle's Orange, but the Color:I sometimes wondered if Yellow would have stood out better because of its opposite color.
View detail
It's easy to paste.
I used it on my friend's Scooter. After degreasing and applying it properly, it did not come off even if I washed the car hard. I used to put a cheap product from another manufacturer on my friend's Scooter and it came off in less than a week! View detail
Fits: Others 10Inch wheel car
This product is inexpensive, and is the one point of the footwear.
I thought it would be difficult to install, but the material is very soft, almost wrinkle-free, no air bubbles, and very easy to apply. View detail
It is a bit short, and is gold or yellow in color?
Design is good. As others have written, it is a bit short.
I started from the rear wheel and realized I messed up, but I was able to turn the Air Valve around and get the front and rear Quantities:Pair (for Left and Right) The "hang" is to try to match the "s" of the "hang".
Go over my corpse and try to finish it nicely….
View detail
We will tell you the point when it is just a little bit too small and put it on the wall.
As per others' Reviews, it is inevitably a bit short.
From the body color, I am confused between Red and Gold.
I would like to see an image that clearly shows the difference between the two colors in the product information.
When pasting, use theQuantity:Pair (for Left and Right) It is a good idea to determine the location of the Valve position as a starting point and to be aware that it will be a little short of the dimensions so that the target will be
View detail
Looks cool.
I think it went on well, but I'm worried it will peel off while driving. View detail
For those who want one point for the suspension...
I am a Rim Sticker Large lover, so I have applied Large stickers on my motorcycle for many years, but I always buy MDF's split type stickers because I think they are very good and easy even for an amateur like me.
When you look at it up close, it may not look like a nice circle, but when you look at it from a distance and while the tire is rotating, it already looks like a large body circle, so it's OK! I put it up with a forgiving attitude.
View detail
Fits: Others 17Inch wheel car
Silver but White
I bought it while shopping because it was inexpensive.
It is silver, but it looks white depending on how the light hits it.
The adhesive strength of the Sticker itself is weak, so it is better to warm up the Rim when applying it in cold weather.
I put it on in November and even after degreasing and sticking it on, it started to lift off the adhesive surface the next day lol.
With a 17-inch wheel, there is a little extra Sticker.
I think it's fine if you just want to use it as a trial. If you want to paste and dress-up beautifully, please contact us! If you want to
We recommend that you purchase a better Sticker.
View detail
Degreasing is important.
Wheel stands out in Titanium color.
Degreasing is quite important. If you do not do it many times, it will peel off.
It was more cleanly applied without detergent solution.
If you have the OP's Squeegee, you can put it on without shifting.
View detail
Easy YOSHIMURACustom Part2
It was installed as Accent on a pure BlackWheel.
The installation itself was not that difficult as it was just a matter of stretching it along the pattern.
There is also a spare for a wrong tension, so I was able to tension it with plenty of time to spare.
I thought it was a little thin for an off-road motorcycle. I thought it was a little thin for an off-road motorcycle, but I think the body color RedBlack of RALLY50 tightens up the feet and gives an overall sense of high quality.
View detail
Rim stripe looks surprisingly different
I bought it to dress-up the wheel area. I think it also has a slight function of guarding the area around the rim, which is prone to scratches.
When pasting, apply with water. I used Guide, but the rim stripe may be slightly shifted where it overlaps. However, it is not noticeable unless you look at it with a gun.
Since it will feel like air bubbles are rolled in, Image is a Large cut that pushes out air bubbles when applying.
Although it is a non-reflective type, the change in appearance is large, and I thought it was a part that makes it easy to feel the changes in my car.
View detail
difficult (e.g. customer, guest, child)
The method of attaching it is also explained on YouTube, but …. It is a cool product, but it requires a lot of dexterity and patience to complete it to a real satisfactory Style.
Also, there is a High level Su-Kill, but if you make a mistake, it is tough because there is no spare Seal at all.
The shape of the Wheel is also important and must be checked.
View detail
I tried to match the color of the car body.
I switched to Triumph Tigers Ports 660, so I put the same MDF rim stripe as before.
The color is Blue to match the color of the car body.
I ordered and received it in about 3 days.
As shown in the instructional video, degrease the wheel attachment area and mist the wheel and tape with water containing 1 or 2 drops of neutral detergent. Then, using the special Gauge, I attached the 4 tapes. After the tape was attached, the heat gun was used to warm up the tape and fix it in place.
If the initial positioning and the next Tape overlap are done properly, it is not a difficult task.
Durability and fading are unknown due to the short period of wear, but price-wise, Solid Collar should be a little cheaper.
View detail
It stands out on Gentle because it reflects beautifully depending on the angle of view.
I applied 16~for 17in. of MirrorTYPE Blue to a 10inch Scooter. I am satisfied with the feeling that the Wheel itself became more luxurious than the original color! View detail
This sticker...
Quality and Texture Information Plain Rim Stickers Yoshimura Rim stickers look special about the feeling of use Design information Made on 12-inch wheels Size Chart Information 12 Inches Cost performance and comparison with other products are much more expensive than normal rim stickers, but I am satisfied WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice when purchasing It is recommended to clean the wheel first and install stickers This sticker is very difficult But when it's done, you can get satisfaction View detail