Reviews
Fits: HONDA CRF300L RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250L, HONDA TRAIL125, HONDA CT125, HONDA MONKEY125, HONDA CROSS CUB110, HONDA CROSS CUB50, HONDA CRF110F
Well, it's only for appearance, but it's important to look good.
It's the look. Looks.
Motorcycle is a hobby, so it is a matter of how much you are satisfied with it. This item solves this problem, and it does not improve the performance at all.
If the OEM engine plug is too hard to remove, apply a Large thicker and harder Washer and turn it between the pliers.
As everyone says, it's expensive, so at least put an O-ring on it.
View detail
CALI Seal
When CALI seals are affixed to the License Plate, the adhesive residue can be a problem when replacing the seal. In the first place, due to the excessive number of registered vehicles in some municipalities, the number of letters on the plate may be too many, and the plate may be covered with the letters, making it difficult to affix the seal neatly.
The product in question is just a Plate that provides a dedicated place to affix a CALSeal next to the License Plate.
It is a simple Level product that some people can cut out of steel or acrylic plate and make themselves.
However, when I picked up the product, I found it to have a nice texture, and considering the time and effort required to make it myself, I think it is an easy and cost-effective product.
However, I am a little afraid that I might scratch the Dustclothetc. when wiping it off when washing the car.
View detail
Emblem
It was an easy job, as there was no modification to be done, just remove and attach the Screws! View detail
Not much change.
Maybe it's not necessary at this price? View detail
Kawasaki Zephyr 400/550 dress up badge. A MUST HAVE
fantastic dress up part for the kawasaki zephyr 400/550cc. my bike now looks complete with this badge and the build quality is amazing. if i could give it 6 stars i would. View detail
m8Bolt to Fashion.
The m8Bolt is Fashion. The price is low, and the luxury is good. View detail
Koo~ Oshii ?? (?"-??? -?) ?".
I used to get frustrated when I couldn't remove the CALI Sticker from my Number because I couldn't remove it to Beauty, but thanks to you, I'm going to be free from frustration ^^.
I think it is a good purchase because it can also serve as one point of dress-up.
…… is,
When I installed it, it was too close to the NumberLeft hiragana, so it took about a quarter of the time as it was.
The hole was enlarged horizontally in Drill and shifted to the Limit to finally achieve the current shape (see image).
I can't say for sure, because the form of Number varies from region to region, but at least in my area Number requires processing ^^;.
I also thought it would have been better if the four corners were slightly rounded.
View detail
Fits: HONDA Super Cub 50, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110ThailandMODEL, HONDA CUB100EX, HONDA CROSS CUB50, HONDA SUPER CUB 50
Chain case hole replacement
Too easy to install, conversely, theft is a concern. View detail
A must if you want to make Racer
Essential for quick detachment of Cowl View detail
Fits: HONDA CRF110F, HONDA CROSS CUB50, HONDA CROSS CUB110, HONDA MONKEY125, HONDA CT125, HONDA TRAIL125, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
It looks beautiful, but!
The original shape is a little smaller than the original, but the Mizo is a little larger! View detail
Fits: YAMAHA TT-R50E, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA Cerro 250, YAMAHA XT250X, YAMAHA tricker
SEROWEngine plug
It has a beautiful finish and is great for one point custom.
Engine oil can be replaced without removing it.
Gasket must provide OEM.
SEROW, which is often a bit plain, will be a bit more fashionable.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
SP Mukawa BoltRetainer
Wow that's cool
Design is good
One Screw hits the Frame
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800
Reduced heat in the thigh area
The W800 has a Bevel Gear Cover that gets very hot in the summer, but this part makes it slightly better.
Installation is easy
However, the price seems too high, even for Carbon.
View detail
moon eyes love~!!
I love Moon Eyes products so much. My monkey car is plastered with Moon Eyes products everywhere. The license plate bolt is one of them. There are two types, but I bought it because I really liked the cute shape of the circle. Make sure to apply rock tight so that it doesn't get loose. I like it because it stands out as a point. I think we need to take good care of it so that it doesn't get contaminated. So that yellow doesn't turn black... Thank you. View detail
Fits: YAMAHA TT-R50E, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA Cerro 250, YAMAHA XT250X, YAMAHA tricker
SEROW、Engine plug
It is completely dress-up parts.
Functionally, nothing has changed, but the impression looks different.
The replacement work is easy and can be done even by beginners in machine tinkering.
Gasket is not included and OEMParts must be provided.
View detail
FashionParts
Parts have been around for a long time and are used in a variety of ways.
[How is it used?
Silencer Fixed
Was the one you received as per Image?
Image itself
Was the installation difficult?
It was so easy that I was surprised.
How was your experience with it?
Parenthesis has improved very much!
[Included Parts:were they on?
It came with an outer bag.
[Was there anything that disappointed you?
None at all.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Poached!
Installed at the base of the Grab Bar on a Z900RS.
The Grab Bar itself is Black, so the Gold color is a nice touch with Pinpoint ?. (*?Please note that the) lucifer
Shorter and slimmer than OEMHook. It's nice.
By the way, I have Babyface's Stand HookV-type on my Z9, and here I have Black-colored SocketFlange on my Z9.
It is good to create a prominent Custom feel with LargeHanGold, but I am satisfied with the Custom that you have to look closely to see. (* 'Ω `*)
View detail
Posh Face Machined License Plate Holder
I installed it on my first Motorcycle and the License Plate area looked tighter, so I bought it to install on my second Motorcycle. I think the cost performance is good. View detail
I thought it would go well with my old motorcycle.
[How is it used?
I was looking for a cap bolt with FUJI TSUBO Type color to replace the bolt for fixing the exterior of my SV650X, which has a delicate design and may or may not be a Neoclassical. I found this product and bought it.
Did you receive the item as per the Image?
This is a design that was the standard for this kind of aluminum spacer a long time ago. FUJI TUBO type. I thought it would be suitable for Motorcycle and Neo-Class cars of a while ago because of its highly universal nature with its uneven design, and the product was just as I imagined.
Was it difficult to install?
There is nothing difficult about this product, as it is installed by biting it in place of a washer when using a cap bolt.
How did you like it?
It's not a functional component. Power up!" Ya Fuel Efficiency! It is a product that does not have any effect on etc., only a slight change in appearance&Washer substitute.
Since it is made of aluminum material, each piece is light in weight and can also serve as a washer, making it a very convenient product that can be used in a wide range of applications.
One point can be used to add an "Accent" when installing the License Plate, which is not so easy to do with BoltSingle Body.
There is no effect of weight reduction, reinforcement, etc. (Strictly speaking, there is a slight increase for color.) I like this kind of products, but I appreciate it very much.
It may not be suitable for the newest model of sports type motorbike, but for the previous generation of Motorcycle and Neoclass etc.... "Chooey old." I think it will help to create a sense of
Was "Included Parts:" attached?
None
I purchased the "Titaniumium color" In Quantity:The price per set of 4pcs. is 1,734 yen, and the unit price per pc. is 433 yen. The price seems to go up and down slightly depending on the color, but it would be even better if the price were a little lower.
Were there any disappointments?
Not particularly
There are Anodized dyed products. The color of the image is different from the color of the actual product. If you are concerned about this, it might be better to check the actual product at a Motorcycle accessory store before ordering.
Make good use of the wide selection of 12 colors to add flair to the Accent of your car body.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use the Barnacle Collar when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
I am sure it will be Large sturdy as it just needs to be used as described above.
[Notes]
Continued exposure to UV rays for long periods of time will cause the color to fade. (The same goes for the exterior of a motorcycle.) When not riding, protect them from UV rays with UV Cut Body Cover or Garage Storage.
[ITEMS TO BUY TOGETHER
Cap boltTypeExclusive Since it is like a collar, prepare a cap bolt of each material& length that you want to install.
[Opinions and requests to Manufacturer
Quantity:1 Set of 10pcs. is 10% cheaper or Quantity:It would be even more appreciated if there is a discount for purchasing large quantities, such as 20% discount for 1 set of 20pcs.
View detail
heavily
Before purchasing the product, I thought it would be lightweight, but when I picked it up, I found it to be quite heavy. But when I picked it up, it was quite heavy.
Installation is very easy. Simply attach with the included double-sided tape.
If you put it too far back, it will hit the headlight when you brake. (It is better to put it in a position where it does not interfere with the headlight when stroking before putting it on.
It is very solid and doesn't seem to break.
Since the double-sided tape is not very forgiving, I am thinking of drilling holes in it and attaching it sometime in the future.
Parenthesis is better and Large is satisfied.
View detail