Reviews
As a light Fender
Purchased as a lightweight for Fender.
There is a different MODEL of the same ACERBIS, but this one separates the front and back Fenders.
I also bought it with the expectation that it would have a cooling effect since it can send VANVAN running air to the Radiator as it is, since it is shaped to have a hole in the middle when used only with the front Fender.
As a result, handling is lighter and we have no complaints about cooling.
In addition, since a back fender would have to be attached to the car if it is to be driven on dirt roads, please consider this as a proposal for use by Maine city drivers or those who can drive only on paved roads.
View detail
Well, that's okay.
When using the OEMBlinker, a dedicated Bracket is required, and the additional cost is..,
The Exclusive Bracket is also somewhat unstable in its mounting position.
Well, I guess it is worth the price.
View detail
Wheel replacement is ….
Chain cannot be bent when removing and replacing the wheel.
Suggestions for improvement.
View detail
I put it on because I made a Fender Eliminator.
I customized it at the same time as the Fender Eliminator, so I don't know how much mud it splashed before the change, but it was probably better than the NORMAL. The back and the License Plate were just about sloppy on wet surfaces, but I don't think it splashed on my back. The RearSeat has some spots of mud on it. View detail
I think it's good that it's cosmetic.
The installation can be done by looking at the Instruction Manual, but the Blinker connection seems to be the other way around. I am glad I read your impressions. I bought some rubber string and waterproof tape at Home center to fill in the gaps. I wish I had done a little more research to see what other manufacturers were doing, but considering the cost, it was a no-brainer. I still get muddy on wet surfaces and in the rain. View detail
It is a good item
I think it is a very good product, simple and easy to install.
It looks better
View detail
It's a great product.
It's a great product.
It is very easy to assemble, and it is sturdy enough that there is no risk of it falling off and being lost while driving.
The design is much better than other products, so it goes very naturally with existing car body parts.
I was worried after ordering, but I am very satisfied. ----------------------------------------- ----------------- It's a great product. It is very easy to assemble, and it is sturdy enough that there is no fear of it falling off and being lost while driving. The design is much better than other products, so it goes very naturally with existing car body parts. I was worried after ordering, but I am very satisfied. Powered by Google Translator
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
I'm not that happy for the price.
It's one of the parts for mounting the long tail. I think it can also be used for the genuine tail. It feels a little lighter compared to the genuine tail. View detail
Good service.
Fast delivery, well packaged, goods received in good condition. Genuine product, correct description. No additional costs arise. -------------------------------------------------- -------- Fast delivery, well packaged, goods received in good condition. Genuine product, correct description. No additional costs arise. Powered by Google Translator View detail
Fits: TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE Rx, TRIUMPH STREET TRIPLE Rx, TRIUMPH STREET TRIPLE RS
Genuine R&G Tail Tidy (Fender Eliminator) for Triumph Street Triple R 2016
As with most manufacturers, they put massive fender eliminators on their bikes from factory. Come on, Triumph, it's just too long. It was decided to get a smaller and more functional eliminator and one we went for was the R&G branded one as this would match up nicely with the colour scheme of the bike. Never used a fender eliminator from anyone else now except R&G. They just do them well. I found the part by coincidence really whilst browsing through Webike R&G section. This looked a nice small and neat package so went for it anyway. This was added to my basket and order placed along with some other parts to keep the shipping low and spread out for the whole order. All arrived in 5 days from Japan to the UK. Yes, I suppose I could buy from R&G in the UK but there is relatively no price difference anyway plus, I already had items I wanted to order from Webike anyway. The eliminator or tail tidy as we call them here in the UK was packaged in a R&G box and then Webike packed all my other items in the outer box. Filled with bubble wrap, nothing could get damaged in transit. The tail tidy is a really good looking piece of kit. The paint is smooth and even and there are no sharp sections to catch you out. It is precision made and everything fitted together really easily. It comes with everything you would need for it to be legal on UK roads including the number plate light. The spacing for the indicators is perfect once everything was fitted. Finished in no time, just a couple of connectors and away you go. The harder part was putting everything back together. Very pleased with how the bike looks now with it being so much smaller. Thanks Webike. View detail
Fits: KAWASAKI ZEPHYR400χ
BaGOOSE integrated Fender Eliminator Kit installed
It fits perfectly and is easy to install. It is very good to have a wider cargo space and to be able to load tools, etc.
Clearance of Rear tire and Fender will be somewhat less.
It takes a little care when going over steps.
I'm glad I put it on.
View detail
I was so happy that it arrived at the right time.
I'm so glad it arrived on the exact date.
The product was also perfectly packaged and in good condition, so it was flawless.
I would like to recommend it because I was very satisfied with the time I spent waiting.
If you're bored with your bike, it's worth investing in.
I ordered several products, but this was the easiest to install and the best quality.
There were no cracks in the carbon, and even the bolt washers were carefully taken care of, so it was very easy to assemble. -------------------------------------------------- -------- I'm so glad it arrived on the exact date. The product was also perfectly packaged and in good condition, so it was flawless. I would like to recommend it because I was very satisfied with the time I spent waiting. If you're bored with your bike, it's worth investing in. I ordered several products, but this was the easiest to install and the best quality. There were no cracks in the carbon, and even the bolt washers were carefully taken care of, so it was very easy to assemble. Powered by Google Translator
View detail
in line with the price
I am thankful that it is much cheaper than OEM Product.
It is also nice to know that the body can be any color since it is Carbon Style.
With JC61, if I wanted to use the collar that came with the OEM, I had to use a drill to widen the hole.
If you use Bolt without collar, it may not be necessary to modify it, but I am afraid that it may crack.
For people who prioritize cost performance anyway.
View detail
Fits: SYM MMBCU, YAMAHA X-FORCE, YAMAHA FORCE 2.0, SYM DRG
Front Fender feels longer and is replaced.
The product feels less durable than OEM.
Just the right length of Fender that I was interested in.
Self-satisfaction
View detail
Fender Eliminator
The installation was not difficult, and I like the fact that the OEM license plate light is used! View detail
Cost-effective and satisfactory there.
[How is it used?
Replaced from OEM
Was the one you received as per Image?
Everything that was in the picture was there.
Price is reasonable. A little dissatisfied with the texture.
Was the installation difficult?
Difficult for beginners.
Blinker, I struggled to remove the WiringConnector on the Tail lamp.
How was your experience with it?
It is more Refreshing than OEM.
Some of the OEM Fender is still there, so there are different tastes.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
A little dissatisfied with the overall texture and the texture of the License lamp.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Minimalist
This plate holder is really small and light. The cut-out monkey is very beautiful, I don't want to put my license plate on it! LED lighting is efficient. In France the plates are quite large and therefore hide the reflector and the sticker logo. Installation is quite simple. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Product quality is the worst Level
After 5 months of ordering, it finally arrived and when I carefully unpacked it, it was covered in scratches. I am so disappointed. Don't they inspect the product before packing it.... It is a regrettable Manufacturer. I can't recommend them at all. View detail
Compromise and purchase
To prevent dirt around the exhaust pipe and puncture of the rear wheel
I would like to extend the Rear of the Front Fender,
While there are only a few compatible parts for 400X,
We finally decided on this product.
Ideally, the product would be sold as a whole Fender, or it would be able to be inserted into an existing Bolt fixed to a Fender.
Before purchasing this item,
We have found a product made by Large land of Bolt On.
Naturally, I was worried.
I inquired about the possibility of installing it, giving the year and model,
The immediate response was that it could be installed,
I bought this one immediately in response to my feelings,
Size did not match at all (laughter).
I will return the product and I will be able to use this product as a Large.
I have purchased the product.
As for the installation, first of all, why did it take so many different shapes?
He said he would probably use double-sided adhesive Seat.
I was wondering for a while if there might be a reason for this,
My 6 year old son was nearby during the installation process,
While making the sticky Seat resemble the face of Pokemon's Character, we flopped it together and pasted it onto the Fender in a harmonious manner.
Plastic screws were included in the package for drilling holes in the Fender and attaching it to an existing Fender,
The thickness of the seal was such that it would not be possible to reach the reverse side using the same screws, so for the time being, only an adhesive seal was used.
Although I am concerned about the adhesive strength, I have used it about 250km round trip including high speed touring×4 times, and so far there has been no dropout, wobble or cracking, but I will do the Screw hitting treatment soon.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
CarbonLong rear fender
No problems with installation, no distortion.
It is a Long Type, so it can play the role of a Fender.
Large Satisfied!
View detail