Reviews
Fits: HONDA FUSION [Fusion]., HONDA FUSION SE, HONDA FUSION X, HONDA FUSION [Fusion] XX
most parts dont fit
The undercowl fenders do not fit without any custom fabrication, i had to use a dremel to make some parts fit. And one fender peice came with broken plastic. Would NOT recommend. View detail
Worked Great
Pretty simple; goes right in place of where your factory plastic nipple broke off. Way better than the 3D printed options people are selling on Ebay. View detail
ENDURANCE [Exclusive for Race]Under Cowl Set
Molding quality and texture is fairly good its to be expected from fiberglass resin made. I like the fact it comes with all the mounting hardware which makes installation easy. The blue markings i made on the product are areas i need to grind or cut off due to my exhaust set up which i am very aware of before purchasing it, i knew i would be modifying it to make it fit. Product was well packaged and protected. I would advice anyone who purchase this cowl to be aware of what type of exhaust set up you have and be prepared for minor modification but if your a Do It Yourself like myself, it shouldn't be difficult to work around modifying it. On a side note you will need to paint it with the color of your choice as well. View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 90
Satisfied enough if you don't mention details.
The OEM side cover had cracked and fallen off sometime due to age-related deterioration.
The one that came with it was White with IonCrack like grain, so I had a hunch it was finally the day.
I didn't want to run with the battery exposed, so I ordered the NTB side cover that I had been eyeing beforehand. The reason why I chose Other Brand Product over Honda OEM is because the price is more wallet-friendly than OEM parts, and the stock is available and the delivery time is short. The most important reason is that the Front Fender I replaced before had a longer IonCrack time than the OEM.
When the actual product arrives, it is clear that the thickness of the material is modest. However, the fit is not bad, and the distortion is not a concern, and it is not a part that needs strength, so I think this is OK.
I know that NORMAL supremacists may snicker at me, but I only want practicality from my CUB, so this is good enough for me. It was a good purchase for me.
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50
Better than I expected.
The Side cover on the Right Side cracked and fell off and was replaced by an NTBSide cover, so the Quantity:Pair (for Left and Right) I don't want the Left to be an unintended color difference, and if the Right is cracked, the Left won't be for long, so I decided to replace it together.
The OEM side cover came in White, but NTB offers only Cosmic Blue and Aba green, so I chose Blue, the same color as the car body. I chose the same color as the car body, Blue, because NTB only offers Cosmic Blue and Aba green. Well, it is natural that the newer the model year, the more the color scheme will be the same.
The mounting screws are ported from the original side cover. It is not a particularly important work.
The fit is good, and so far, no one has asked me why I used external parts.
From my experience, the NB exterior is more durable to IonCrack than HondaOEM, so if you are not particular about OEM, you should use it.
View detail
Storage Space Get
My own KATANA is a limited edition red, so I had a hard time matching the color, but the new, larger, and more spacious storage space makes it much easier to use. Motorcycles these days have short tails, but as an old man, the old-fashioned long tail sticks in my mind. View detail
It's pretty~
최고에오About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
It's still good!
Installed on a 2023 SpeedTWIN1200.
I had no choice but to purchase a 2019 MODEL Bikini cowl, as there were none available on the market that corresponded to the 2023 model year.
The quality and style of the product after installation are satisfactory, although additional work is required to cut out some parts for installation due to the different year. However, I am satisfied with the quality and the style after installation.
View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB
I think it was a little small!
[How is it used?
Purchased with the expectation of wind protection for city driving and short distance touring.
Was the one you received as per Image?
It was exactly what I saw in the product listing, but I wish it were a little larger in size.
Was the installation difficult?
The installation was done by downloading the installation instructions on the Net.
But the installation itself was not like living in a house.
How was your experience with it?
As you said, the wind to the chest seems to have improved, but the wind seems to come to the upper side from the bud root
I wish it had a little more height, but I wonder if there is a special incense for front calipers... I don't know, I haven't actually put it on.
[Included Parts:were they on?
Included Parts:was attached.
However, since it was attached to the Seat, the adhesive glue stuck to the Bolt and Washer, so it took a little time to take the picture.
[Was there anything that disappointed you?
The Bolt and Washer included with the Seat are installed, so this is not RoseRose II, but the items included with the Bracket were packaged in one bag, so it is not RoseRose II.
I thought that if they could have done the same, they wouldn't have lost it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Bracket is not that difficult to install, but the Bolt on the Headlight side must be held down when removing the Bracket and the Bracket must be attached to the Quantities.:I thought it would be better to Set
The left side of the body (brake lever side) has a meter in the hand, so there is a possibility that the washer may drop a little, so we need to be careful.
think
It is better to be careful and watch so that there is no gap when the washer is temporarily fixed in place.
View detail
KITACO Headlight Visor
The quality and design of the product seem to be the best. I think this is where a design can be completed with just one small, small part.
We are grateful to Webike for ensuring that parts sent far away are received safely. -------------------------------------------------- -------- The quality and design of the product is top notch. I think this is one of those things where you can see the completeness of the design with just one small part. Thank you Webike for making sure that parts sent to far away places are received safely. Powered by Google Translator
View detail
Matching well with the body color
I am satisfied with the texture, design, and color. I was especially impressed that this color was available even though it was the model color 10 years ago. Practically speaking, I felt that the wind blowing against my chest and abdomen during driving was reduced. However, when I went under the Cowl during riding, there was no windproofing effect from the chest to the head, and it did not reach the practicality I was looking for. View detail
fitment issues
I was excited to recieve this poduct. There are a few fitment issues with these plastics for my af27 dio. The front piece the 4 bolts on the back side only two line up the other two are so far off would need to enlarge holes to make it work. The top headlight piece does not fit well pops out on the one side and on the middle. The rear pieces seems to fit alittle better but not the best. View detail
Lots of interference.
Purchased to prevent stains rather than to receive Oil.
Material:It is made of FRP and weighs 580g.
As is, there are no nests or hickeys, but there are many Small scratches and scuffs, so it is painted.
Lightly polished with #1000, sprayed with a buffing compound, and painted with 2-component urethane.
Cut because it interferes with Bracket and Hose near Side Stand, although it is not mentioned in other reviews.
Cut because it interferes with the IndonesiaFull Exhaust System that is being installed.
It was difficult because there were many parts to cut and a lot of cutting.
Prepare cutting and cutting tools for those who purchase them, as they are difficult to use with manual tools.
View detail
PERFECT
Same installed on specjal edition. I am very happy, looks excellent, very clear installation manual. Perfect stuff to customize my bike. Clear manual, easy to install View detail
Poly sports exterior
The hole to insert the washer is generally small. I went to Smooth for installation. View detail
Excellent
They are made from composite material and lighter than the stock ones Thinner and more elegance, especially with sr400 gas tank. You need to remove air box and to relocate all electric parts from left side. View detail
Garbage too much grass.
The body is wrapped with PetitPetit, and the cushion is laid firmly, but when you open it, you see the wound.
Is this the fault of the carrier or the manufacturer…?
I was so dismayed by the workmanship that I wondered if I would be embarrassed as a PRO if I had been in this situation at the manufacturing company stage.
There is no Instruction Manual and I don't know how to attach it.
Also, although I can understand a slight error in handmade, the hole position is gapped 15mm from the center, and I am not sure if it can fit in there or not.
Garbage or Garbage? Are your eyes knothole? Are you ashamed of yourselves as PROs? It's a bit like a scam!
View detail
Monkey 125 headlight visor
Excellent workmanship, excellent chrome plating, fast delivery, adds retro look, shame about the import taxes. Advised ------------------------------------------------- --------- Excellent manufacture, excellent chrome, fast delivery, adds retro look, shame for import taxes. Advised Powered by Google Translator View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
Processing is assumed to be Large.
The Instruction Manual states that some modifications may be required, but basically, Dry Carbon, an Other Brand Product, can be installed without modifications in most cases. As usual, this product also requires modification. The remaining 20% will be modified during the installation process.:Pair (for Left and Right) The gap between the two is different, so if you are concerned about the gap, you should refrain from using this product. I had high expectations for this brand because it has been gaining momentum recently, but I have a problem with the outside of Dry Carbon products, including some AEC products. View detail
good product
I was able to install it on a 2019 1200Iron with no problems.
I think it's a good product
View detail