Reviews
Virago
Nice windshield! It was hard to find it but webike had) Fine quality, installation took some time and efforts... used a hole pincher to make holes in apron. View detail
Windproof effect.
There are many videos on youtube etc. for installation, so you can install it while referring to them. As for the windproof effect, it has a windproof effect from half of my face to my chest area. The Demerit has a screen that creates turbulence, which causes the head to shake when the wind blows against the helmet. The height and angle of the screen must be adjusted as often as possible to avoid turbulence. It is not enough to just raise the screen, but it is better to adjust the image so that the turbulence hits the entire helmet and the wind pressure is dispersed throughout the helmet. It is not easy to adjust the helmet, but I like it because it reduces fatigue during long tours, and it also makes the helmet look more like a travel helmet. View detail
Easy to use as OEM compatible without distortion
Used on ZZr1100 (C1).
The OEM screen was damaged from the attachment point due to age-related deterioration, so MRA's screen was introduced this time for the purpose of repairing it. [Color] Clear? [Color] I was wondering if it was Smoke or not, but this time I decided to use it as a makeover. [Color] Smoke.
The OEMScreen is slightly thinner than the OEMScreen, but has less distortion than the OEMScreen, and has good visibility even when it is tucked into the cowl.
However, Smoke Screen is darker in color than I had imagined, and I think it would be tough to run face down with Smoke Shield's Helmet late at night.
A Screen RimRubber was also included and its length was appropriate and favorable.
I am glad to see that they are making parts that fit older motorcycles as well, as screens wear out due to scratches from flying rocks and need to be replaced periodically. Next time I will try Clear Screen.
View detail
I think this is the only choice at the moment.
I was considering installing a screen and saw that MRA and ODAX had screens for sale. (Since it is stated in the product description that it cannot be used in combination with the genuine USB socket.) However, the installation stay was different from the picture of the person who installed it, and the USB socket could only be installed with the cover of the rubber cover of the USB socket open. I was using it as it was for a while, but I was wondering whether I should remove it or not because I thought the terminal would eventually be damaged if the cover was left open, when Yoshimura released Wind Armor. I saw the product image and the mounting stay, and it did not seem to interfere with the genuine USB socket, so I bought it and installed it. Now I can safely close the cover lid of the USB socket and use the socket. The screen design also matches the distinctive front mask of the 8S, so I would recommend it to anyone who uses the stock USB socket and wants a screen as well. View detail
TSRSports Clean
cbr600rr (2bl-pc40) Used for
Every time I change Motorcycle, I change Screen, but usually it is a certain foreign product. [Color] I used to use Smoke, but this time I decided to go with TSR on the recommendation of a friend! Moreover... [Color] Clear! At first I was only worried, but when I put it on and looked through the Screen, it was amazing! [Color] It's great to see it in Clear!
Also, parts to attach to Screen (Guard?) I was happy and impressed that WW is just the right length to use without having to cut the
I think the Body is well made!
View detail
![Windshield [Corsa]](https://img.webike-cdn.net/catalogue/images/82256/CORSA_TS.jpg)
Fits: KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Super easy and cool. (*´>ω<`*)
Super easy to remove and install d ('∀'*)
What if I fail or hurt you?
View detail
Focus on Design
I bought this product for the design, to make me feel better about my JOG125, because the Meter area looks poor. I don't expect it to be windproof because it is not high enough. The product itself has a good texture and fulfilled the purpose of purchase. View detail
Essentials for commuting to work and school
We installed this Screen (RS) on an ADDRESSV125S.
I found that the wind does not blow directly against my body during winter driving, which reduces the coldness I experience.
Also, when driving in the rain, the logic is the same and comfort is improved.
View detail
Care must be taken when assembling.
It seems to be incompatible with the Inner panel during installation.
I would like to process and correct.
It's cheap, so I guess it can't be helped.
View detail
No need to attach the phone Folder to the Handlebar and it is easier to turn the keys!
First of all, I feel that Eliminator has become taller and Parenthesis has improved (laugh). The windproof performance is not high and the width is slim, so the wind is coming in from the side of the Shield. For those who value performance, we recommend a wider width. I guess it is better to have it than not to have it. What made me happy was that I had attached the Smartphone Holder to the right hand side of the Handlebar, so I had to stick my hand into the narrow space and turn the Engine key, but when I moved the Holder to the Clamp Bar, I found that the keys around the Holder were refreshed and the Holder was much easier to use. But when I moved the Holder to the Clamp Bar, the key area was refreshed and the Stress was gone! I was able to install it even as an amateur while reading the instruction manual. However, as the instruction manual also warned, the Assembly is somehow prone to cracking! I also have a quantity:2pc. I broke one of the set points and had to use superglue, so you might want to have some ready just in case. I am thinking of adjusting something because I hear a chattering sound when I run after installing it. View detail
![[Repair Parts] Handlebar Clamp Fitting Set for Repair](https://img.webike-cdn.net/catalogue/images/116615/43363_TS.jpg)
Fits: Others For UniversalScreen
Repair Parts are well stocked.
I had only the Screen, so I purchased only the Repair Parts and was able to install them.
The installation was easy to understand because the Instruction Manual can be downloaded from the website.
The feeling of using it is not a problem with wind pressure, though, as I have used it before,
The Cap of Included Parts:has the BALI in the image, which was prepared with a Cutter Knife and then installed.
The installation points are the Clearance and Angle of the Screen and the Light, which change the appearance of the Motorcycle.
As a request to the manufacturer, we would like to sell only the Spacer, which is attached between the Handlebar and Clamp, as a Single Item.
I was so satisfied that I Repeat both Left SideRight Side.
View detail
Effective for high speed drivingLarge
I used to install something smaller than No Brand's Blast Barrier, but the Blast Barrier is superior in both form and effect. It is especially effective at high speeds. View detail
Performance Expectations
The OEM wanted a longer Screen because it felt like the wind hitting the Helmet was swirling around my chest. [Color] Since it was clear and with color, and since we are thinking of installing a handlebar riser in the future, we decided to go with this product because it was slimmer than other manufacturers and there was word of mouth on a certain site that it is difficult to interfere with the handlebar when it is cut off. The length was +7cm compared to OEM, but it seemed to be measured at the largest length of each, and there was about +11cm at the center position where it was actually installed. Although I have not actually driven the car due to poor weather conditions, I can expect that the wind will have much less effect on the car. View detail
Good
I had a Puch Screen on a 2008 SB I used to own. I remember that I had a Large change difficulty installing it back then, but I guess the accuracy has improved, and it went on easily on the 2018 model this time.
I chose Dark smoke and am satisfied with the way it looks.
View detail
![Screen [Double Bubble]](https://img.webike-cdn.net/catalogue/images/30991/474_zerogravity_TS.jpg)
Not bad, but ….
I want to change the shape of OEMScreen and [Color] I bought it for the Smoke color.
The quality is not extremely bad, but I was concerned about the White powder like Wax that seems to have been used for finish polishing left between the bumps of the Screen and the thickness is thinner than the OEMScreen.
As a USManufacturer, the roughness of the construction cannot be denied.
It's a drop in the bucket compared to Screen, a domestic manufacturer of Magical racingetc.
Shape and [Color] I am satisfied with the density of Smoke.
Windproofing is not nearly as good as OEMScreen, but I don't care.
Logo sticker was included as a Large and Small bonus.
View detail
I installed it on the Hunter Cub.
thank you
I installed the no99 on the Hunter Cub. I think it's a style that goes well with it. The accessories are a bit cheap, but I still don't think it tastes like this style. I plan to install Asahi legs in the future. It's too cold in the winter. Thank you. Please take care of me in the future.
Thank you.
It's equipped with no99 on the Hunter Curve. I think it's a style that goes well with you. The accessories are a little cheaper, but I don't think it's going to have a stylish taste. I'm planning to install Asahi's legs in the future. Winter is too cold. Thank you. I look forward to working with you ------------------------------------------- --------------- thank you I installed the no99 on the Hunter Cub. I think it's a style that goes well with it. The accessories are a bit cheap, but I still don't think it tastes like this style. I plan to install Asahi legs in the future. It's too cold in the winter. Thank you. Please take care of me in the future. Thank you. It's equipped with no99 on the Hunter Curve. I think it's a style that goes well with you. The accessories are a little cheaper, but I don't think it's going to have a stylish taste. I'm planning to install Asahi's legs in the future. Winter is too cold. Thank you. I look forward to working with you Powered by Google Translator
View detail
![Screen [Double Bubble]](https://img.webike-cdn.net/catalogue/images/30991/011_zerogravity_TS.jpg)
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
I like it very much!
Higher than the OEM Screen, but not too high. I like it very much because it is not subject to wind resistance! I didn't dare go with Dark smoke, I didn't want to lose my view of the front. [Color] Purchased Smoke. The transparency is just right. There is a slight hole misalignment, but I don't mind. It looks really cool. I am very happy with my purchase. I am looking forward to the coming season! View detail
Note that the fit is different from the Image photo!
Please note that the delivery is different from the product photo!
The Installation Instruction Manual also includes a photo of the actual installation so the Shield does not come to the top of the Light and will be installed with the previous Shield on.
I don't think it is worth $30,000!
View detail
It is unfortunate that the Sticker or company name is not specifically mentioned or attached!
I thought it would be good to add a Sticker or something to promote the product.
Also, I think it would be better to use a nicely painted Washer for the Screen installation if possible. (Currently, it is roughly painted Black)
Since the Gold amount is 30,000 yen, I was hoping to clean up the details if possible!
View detail
Fits: Others 50cc-750cc for each company/Pipe handle
very good
It blocks the wind really well and the design is so pretty. I'm thinking of buying another one It's very easy to install goood~~~ View detail