Reviews
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
PMC Seat looks good but not most comfortable
The PMC Tuckroll seat looks great. It is very lightweight also. However it has a particular fit and for me was not very comfortable. It as a pronounced scoop in the rider's portion and it limits movement of the rider while compressing the crotch area. For a male the presure on the crotch is especially uncomfortable. The cover material is also a bit too slippery. I imagine it's good for waterproofing but while aggressive riding it slips. View detail
Fits: HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200CX R100 ROADSTER, HARLEY-DAVIDSON XL1200NS Iron 1200, HARLEY-DAVIDSON XL1200R R100 ROADSTER, HARLEY-DAVIDSON XL1200V Seven Tee Two, HARLEY-DAVIDSON XL1200X Forty Eight, HARLEY-DAVIDSON XL1200XS Forty-Eight SPECIAL Knife, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL883L Low, HARLEY-DAVIDSON XL883N Iron 883, HARLEY-DAVIDSON XL883R
Arrangement doubles the charm! Don't you agree?
It is the same Vertical type Seat as the Single Seat I am using now, and I love the design!
I am sure that a little more Arrangement will also improve the Parenthesis even more.
View detail
Tanaka Shokai (TANAKA) Tanaka Show Kai Seat StopperRubber Se
It is a good product that fits perfectly. View detail
great seat cover
seat cover fit great and loops over each end of seat for easy installation. No matter how much stretching and how many staples I used, there's a couple wrinkles.The color looks good, but doesn't match OEM. It's a little darker.Lots of grip ! It took a couple days at the to get used to it. Night and day difference from stock.Use 6-8mm staples when you install or else it doesn't stick View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
measures to deal with a shortage of labor (labour)
Design, texture is very good, but the pain is painful ?? may not be very effective…. View detail
hmm
I'd bought the CB250R before because I'd heard it had a bad footprint.
I'm going to put it on.
Quality is good, almost OEM Product quality.
Almost indistinguishable from an OEM sheet.
The seat feels a little thinner, and the corners of the seat have been removed.
However, I don't think we should expect a Large width footprint improvement with this seat.
It's just a little bit. It's just a little bit. I feel like I have better footing.
View detail
Fits: YAMAHA VINO, YAMAHA VINO
It's Recommendation because of the quality!
My brother-in-law's Scooter (VINO) Seat was torn, so I reupholstered it for him. The fabric stretches well so it is easy to pull and put up! It is also durable, so it doesn't hurt at all even if I get in and out of the car every day! It's a recommendation because it makes the dirty Seat look like new! View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R FIREBLADE SP, HONDA CBR1000RR-R FIREBLADE
It was nice that it arrived a month earlier than promised.
There was the inconvenience of having to use the rubber washers on the original seat, but it fit very well and had a dress-up effect and did not lean forward.
Because it is a functional tuning product, you can purchase it without hesitation.
The inside of the seat is lined with vinyl and stitched tightly, making it a very reliable product.
I don't know about people who haven't used it, but I think those who have used it will continue to use it in the future.
Trust and try it~ ---------------------------------------------- ------------ There was the inconvenience of having to use the rubber washers on the original seat, but it fit very well and had a dress-up effect and did not lean forward. Because it is a functional tuning product, you can purchase it without hesitation. The inside of the seat is lined with vinyl and stitched tightly, making it a very reliable product. I don't know about people who haven't used it, but I think those who have used it will continue to use it in the future. Trust and try it~ Powered by Google Translator
View detail
Fits: YAMAHA Dragster 1100 Classic, YAMAHA Dragster 1100, YAMAHA Dragster 1100 Classic, YAMAHA Dragster 1100
Xvs1100 seat ,excwllent
Quick ish delivery, very good seat made well and fits perfect makes my bike look even better . Came well package and sealed with instruction, I will be ordering foe more in the future View detail
Fits: HONDA ADV150, HONDA PCX, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA ADV160, YAMAHA NMAX, YAMAHA NMAX155
Effective in rainy weather and midsummer
[How is it used?
In use on NMAX 155.
When I ride in the rain, the seating surface gets very wet, so a friend of mine recommended that I purchase one.
Was the installation difficult?
It's very simple
Simply follow the instructions in the Instruction Manual to cover the Seat and fasten the back of the Seat with Magic tape.
The markings are also provided so that the front and back will not be installed backwards.
How was your experience with it?
I got lucky (?) the day after I installed it. It was a rainy day, but it worked!
The ride was comfortable with no uncomfortable wetting of the seating surfaces.
The improved ventilation will also reduce the heat of the Seat in mid-summer, which we will experience a little later in the year.
There is no movement of the mesh cover during driving, which is good.
[Was there anything that disappointed you?
It's not a disappointment, but I can't wipe the Seat without removing it each time, so it looks like it will get dirty inside if left unattended to some extent.
Perhaps due to the Belt fastening at the back of the Seat, closing the Seat now requires more force than before.
View detail
Fits: KAWASAKI Eliminator SE, KAWASAKI Eliminator
It's as solid as the driver's seat.
When I Tandem with my son, he told me that his buttocks hurt, so I decided to buy it.
Like the driver's seat, it is firm and Cushiony, so it is effective Large.
There was a word of mouth that it was difficult to remove the RearSeat, but please refer to a YouTube video that shows how to remove it.
View detail
Fits: KAWASAKI Eliminator, KAWASAKI Eliminator SE
It's solid
The fabric is more solid and cushiony than I expected.
It seems to work well for medium to long distance Touring.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Tandem seatBelt cover
I chose gold for the Seat cover because I have a uniform color of gold. I like the texture and the high quality feel of the cover. View detail
To repair the Motorcycle seat anchorage & seating!
Since I have repainted several Motorcycle Seat fabrics, I thought I would try to do the same for the inside of the Seat! I decided to take on this challenge. The result was Large satisfaction! This sponge is really easy to work with (easy to cut with scissors), so you can easily use it for anchoring and repairing scraped (rotten) Seat sponge! I had some left over and used it to repair the sponge on a worn out seat chair that I love, and it worked fine too! The price is cheap and I will replace this sponge every year from now on! View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3
Higher than OEM.
[How is it used?
Circuit&Pass
Was the one you received as per Image?
Yes
Was the installation difficult?
It is essential to correct the holes.
How was your experience with it?
The behavior is conveyed better than OEM.
View detail
Cosmo!
It will SUPPORT your hips.
It's easy to get the Cornering posture and
It also assists with Knee grip.
I am glad I installed it!
View detail
Addressv125Seat
The Seat I received is torn and I want to return it.
I had to delete the order screen when I received the item and
And that it's an unused number to call.
I could have emailed her, but she wanted a picture of me.
They said they shipped a torn Seat and if you want to return it, you have to pay in advance.
When you send a damaged item, you pay cash on delivery, right?
In the first place, it was not an expensive item, so I thought I would pay in advance.
It makes no sense because it would be an expensive product. 。
Why should our side have to go that far?
The system is difficult to return.
I still use this Shop only for buying OEM Parts.
View detail
It's cool
So far I haven't felt any buttock pain.
Above all, Design is good.
View detail
It gives a sense of luxury.
It feels better than the NORMAL Bracket. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
The quality of the product itself is good.
It is fastened with a string.
If you tighten the strap in the wrong direction, it may tear.
When tightening the strap, be careful not to tear the opening.
The cushioning has improved and the quality of the product itself is good.
I would like to recommend it to anyone who feels burdened by fancy, genuine sheets.
-------------------------------------------------- -------- It is fastened with a string. If you tighten the strap in the wrong direction, it may tear. When tightening the strap, be careful not to tear the opening. The cushioning has improved and the quality of the product itself is good. I would like to recommend it to anyone who feels burdened by fancy, genuine sheets. Powered by Google Translator
View detail