Reviews
Well, yeah.
I don't like that the Bolt on the Front side can have a little gap.
It is recommended that two Jacks be used so that the Engine does not Gap.
I don't like the point where the Bolt paint peels off with Wrench when tightening.
View detail
Even a custom novice could install it.
I installed this product on a CT125 JA65, and although I am new to customization, I was able to remove the existing frame and install this product without any trouble. Although the Instruction Manual mentioned that there is an upper and lower joint frame, it was difficult for a layman to understand the diagram for distinguishing between the upper and lower frames. It was difficult for a layman to understand the diagram for identifying the top and bottom. I thought that only a person who could read drawings could understand it. Apart from my impression of the product, I was also not impressed that I could finally buy the product more than three months after each Site listing began. View detail
Fits: HONDA REBEL250, HONDA REBEL250S EDITION, HONDA CL250
I'm almost satisfied.
Exhaust system was changed from front pipe to MORIWAKI.
The vibration and other factors had already been improved because of the replacement of the
Frankly, it was hard to tell the effect.
Speed at which strong vibration occurs at high speeds is 3 to 5 km/h
I think it has grown.
I definitely felt that the rigidity of the Frame was slightly increased.
I have seen the video etc., and it has a very good reputation.
The more novice you are, the less likely you are to expect too much.
I am sure we will see the effect after long-distance, high-speed driving, etc.
I did the installation myself, but it is definitely better to have a store do it for normal people!
There is a high TorqueBolt attachment and removal of Engine Jack-up and Engine hanger bolt.
There is Torque management, and a reasonable selection of tools, including a hexagonal box wrench,
It would be difficult without knowledge.
As for the look, it is very good as it attaches to the lonely Engine surroundings.
It would be better if there was a Plating Specification or something like that.
View detail
Takegawa Sub Frame Kit installed
The Sub Frame Kit was selected because we wanted to keep the width of the CT125 to the sides of the vehicle, and the volume is slightly increased due to the larger pipe diameter. If you tighten the bolt first, the Under Guard will not be attached. View detail
2017 CB1100EX Active Frame
Excellent product shipped all the way to Canada very promptly. It is a quality item that I look forward to installing. Customer service from Webike was also excellent and I already have a list of other items that I will be buying from them. View detail
Fits: HONDA REBEL250, HONDA REBEL250S EDITION, HONDA CL250
resolving a severe earthquake
The tremors from 90 km dramatically disappeared and I am not tired at all even when touring long distances. View detail
Unobtrusively Custom
I bought it because I wanted to increase the number of BlackParts as much as possible.
It is also nice to see that the Pipe diameter is slightly larger than OEM.
I was wearing Zita's Under Guard.
The interfering area on the Right Side was shaved off.
View detail
Very good looking.
I put it on because of how cool it looked. It was just right because I personally didn't like the sub-frames that stick out. It is very cool because it is clean but still has a presence.
However, if I was not careful about the angle of the Shift lever, it interfered and scratched when I stepped forward on Lever.
View detail
T9GT performance damper
Install performance damper on my bike. Previously bike feels a bit wobbly during high speed, now it's more plant and stable. Highly recommend for others thank. View detail
Fits: HUSQVARNA 701 Supermoto, HUSQVARNA 701 Supermoto
If you want to run Circuit
When using a tire warmer when running on the circuit
With this, the front and rear tires can be raised with a single Lift Stand.
If you don't have it on, or with an Under Guard from another company, it will almost always fall over.
The Type I bought is not the older butchered or Cut-outType, but it's good enough for my purposes.
View detail
Ideal for Dress-up
This sub-frame enhances the poor BodyFrame and is thicker and more powerful than the OEMPipe diameter of the CT110 HUNTER CUB. The price is high, but I am satisfied with the quality and large size of the product. View detail
YAMAHAPerformance damper
After a short ride, I feel that the ride is similar to the ride immediately after the front fork is over-fallen, with a lighter steering action and a slight reduction in vibration. View detail
stern
The face became tight and stern.
Personally, I'm very happy with it.
One drawback is that the frame part gets in the way when trying to remove the bottom part when changing oil. (This is the position where the Oil is just about to be applied to the Frame.)
It inevitably requires a little effort and a little ingenuity, and I think that is a bit of a hassle.
View detail
ActiveSub-frame
It is so easy to bank that even a layman can understand it.
Timing to bank the Motorcycle itself allows it to fall over in a straightforward manner.
View detail
good performace Damper
It's more balanced The price is rather high, but I recommend it Solve anxiety and discomfort in a pure state at once I wonder why Yamaha sells them as accessories If you add it in a pure state, I think the evaluation of MT-09 will be better. View detail
High quality
Seen this engine sub frame on another monkey z50j and thought it looked awesome. I decided to take a chance on it with my z50j with a 190cc engine to see if it would fit.fitment is perfect and helps reduce vibration from the engine. The finish and build quality is very good.i recommend this product View detail
Fits: HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883
Fairly subtle.
Worn on Harley XL1200C SPORTSTER 1200 xl1200cx
Frankly, it's better than nothing,
Level.
First, the position is low.
I think a higher position would work if it could be done.
In addition, the position of the notch where the Engine is fixed is not aligned.
The FrontEngine side is not firmly fitted and is shallow.
Coating is solid and non-slip.
For these reasons, the value of buying
View detail
ActiveSub-frame
I'm glad I bought it...and I'm happy with it! It's cool! It looks a lot different (and better)! View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA TRACER900, YAMAHA TRACER900, YAMAHA XSR900, YAMAHA XSR900, YAMAHA XSR900
Please come to Distance Gov.
[How is it used?
I use it only on holidays, touring about 300 to 500 km a day once or twice a month, and my tire is MichelinRoad6.
Was the installation difficult?
A friendly Instruction Manual is included, so it's easy as long as you have the necessary tools.
How was your experience with it?
My impression is almost the same as your Impression. The straight driving stability is improved and vibration is reduced, which definitely reduces fatigue during long tours. On the other hand, there are some negative impressions that the fluttering feeling is reduced, but I did not feel that way. On the other hand, I did not feel that the fluttering was reduced. On the contrary, I gave a positive evaluation to the cornering because it became easier to make a single shot to fall down at a low-speed corner and to make a gradual adjustment at a corner with loose curvature. Even on a rough road surface like Rokko, the stability during cornering is increased, so the throttle work is less affected by external disturbances from the road surface.
Before I switched to Toray Racer, I was driving an Adventure with a liter overweight of 270kg, and now I can once again enjoy the moist feeling of driving that I had then. However, the light weight of the vehicle has not spoiled its light mobility or ease of handling, so I am very glad that I installed it.
View detail
Rugged Style is Upgrading??
Sub-frames are not included in the Frame Strength analysis chart published by Honda, and sub-frames have nothing to do with the improvement of vehicle body rigidity. The structure of the mounting points of this product also does not contribute to the improvement of vehicle body rigidity. However, the sub-frame does not contribute to the improvement of vehicle body rigidity due to the structure of the mounting points. Parenthesis. I am satisfied with the Large at It may have contributed slightly to the weight reduction of the car body.
Due to an error in the Instruction Manual, there was an excess or shortage of Bolts required for installation, but this was promptly addressed.
View detail