Reviews
No instruction manual included
There is no instruction manual. The collar and bolt are confusing, or rather, wrong. The "right side, left side" in the product description photo is "right side, left side" from front to back. The 150mm bolt and 68mm total collar are installed on the left side of the vehicle. The 115mm bolt and 33mm total bolt are on the right side of the vehicle. The tightening torque is 35 ft.lb. It was able to be installed properly on the American specification 451cc Eliminator. There is no instructions come with it. 150mm bolt and 68mm (55mm + 13mm) collar are for the left side. 115mm bolt and 33mm (20mm + 13mm) collar are for the right side. Tightening torque is 35 ft.lb. They fit Eliminator 450 and 500 too. Enjoy! View detail
Works like a skid plate should
Installation will require only 5mm bolt. Color match is wonderful for bike. Immediately took this to a local trail to test it out and managed to slam it on some rocks. Held up great, took a bit of damage but that's what it's for! Its tough but it's still plastic so I'm sure it has its limits.something to protect the finish on the frame and keep the mud off the motor.Little to no gaps, excellent coverage of major components.You will need to remove this skid plate when you change your oil.But if you are a little lazy about your oil changes, this may not be for you.This is the perfect solution and was reasonably priced. View detail
I think I bought it well
I bought a Monkey 125 and enjoyed riding it, but the muffler manifold always felt empty. I looked it up and found an item called an engine underguard. I bought it because I thought it would fit well with the Monkey 125 I'm planning. I think it's good to get both dress-up and protection effects.. View detail
Cost performance ◎
We chose the over-made model because we wanted to coordinate it with the sub-frames.
The installation was done by Shop.
Material:Polishing was selected, and the connection with the sub-frame is now shiningly gorgeous.
Custom feeling is up, I am satisfied.
View detail
Custom look
It is recommended to install at the same time as the engine slider.
How does it improve the performance of the Motorcycle? But this alone will give you a great sense of customization.
View detail
Fallen cannibals
The system was installed to reduce damage to the vehicle body and engine in the event of a standing accident or a fall.
It gives a sense of overhang and security.
View detail
High quality is realized, seems to be very practical.
[How is it used?
Myself, I don't like Guard, but to use it as a base for fog mounting.
Was the one you received as per Image?
Impressed with the cleanliness and precision of the finish. I think it is a good product for the price.
Was the installation difficult?
The 3 Bolts that suspend the Engine are replaced with the attached special Bolt, so basically, a Jack is required. I think it is easier to work with a smaller Jack.
How was your experience with it?
When I installed it and got on the car, I was impressed by the very high quality of the assembly, which was nicely aligned with the lines of the Radiator cover, as shown in the photo. I was very impressed with the high quality of the assembly.
I have never tried to rub it, but it seems to do the job of PROTECTION well.
[Included Parts:were they on?
The instruction manual is, well, easy to understand.
[Was there anything that disappointed you?
None in particular
Manufacturer conformity is after 2020, and Initial Model does not seem to conform.
The pipe diameter is 25.4mm, so the LED fog bracket fits a wide range of brackets.
LED fogs are in the works, but I will add them when they are installed.
I thought about installing the fogs on the handlebar, but since the R's sibling has a heavier headlight assy than the R, I did not want to add any more weight to the handlebar.
View detail
Be careful when installing!
The product is Large and satisfactory, but the Bolt On seems to be easy to use. However, when removing the OEMBolt, I had to be very careful to support the Engine with a Jack and remove the Bolt, but the Frame and Engine still gapped a little.
The center of the bolt is gapped.
In the end, I took it to the Shop and asked for it. 。
SliderManufacturer or not, we think it is better to leave it to the Shop, as we think it is very difficult to install.
View detail
Steady making
A must-have for circuit driving. This is a product with excellent cost performance, which is available from various manufacturers.
Previously, Material:We had been using FRP ones, but they were quickly damaged, so we decided to go with this product. It is well made and easy to install. It is a good product.
View detail
It certainly works.
Looking at the frame structure of the NINJA2 Helmet 50/400, it seems to me that the Left Side conectoplate is intentionally made weaker by bending it. It is my imagination, but it may be that the torsion of the frame improves mobility. The claim is that the Damper will absorb vibration and provide straight-line stability by restricting the movement here.
As it was, the ride quality was not good, so I weakened the front and rear Suspension settings by about 2Click, which I think improved the driving stability without worsening the ride quality.
I am a dull person who cannot tell the difference with a slight change, but I can certainly feel the change. It may be too much to say that the driving has become more luxurious, but I feel a sense of stability.
I am tuning the front and rear suspension with Technics or NITRON, but if you put it on a vehicle with Normal suspension, I think the original uncomfortable ride and thrust will be emphasized. However, if you use NINJA2 Helmet 50/400, it may be good for those who don't feel bad ride quality.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP
parts shortage
There were no defects in the product.
However, parts were missing.
I think I am at fault for taking so long to open the order and for starting without NumberRinging all the parts. I ordered only Grommet today.
It is impossible to install until the part arrives, so it is not possible to put it on.
If you are considering purchasing, please make sure to check the part.
View detail
SLASHSlider
Mounting holes were slightly misaligned. View detail
It is definitely better than home-made.
I used this product when I installed ESTRELLA's Center Stand on my 250TR. I had been using a bracket I bought at Home center as a substitute for the stand, but this product refreshes the underside of the stand and solves all my problems. It also seems to be durable.
It is functioning well. I am satisfied.
View detail
Fits: HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA X-4
K-Factory rear shock slider
Ok so I was expecting the slider to be bigger than it was so not sure it will offer much protection,I can say that the product is well made and looks nice when fitted View detail
I am very satisfied with the fast delivery. Thank you webike.
I am very satisfied with the fast delivery. Thank you webike. I will repurchase it next time The packaging of the product is very good View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
I was able to install it this time.
I was able to install it on a new 23 year old car. View detail
Fits: DUCATI SUPERSPORT 950, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI MULTISTRADA 1200 DVT PIKES PEAK, DUCATI MULTISTRADA 1200 DVT S, DUCATI SCRAMBLER 1100, DUCATI SCRAMBLER 1100 SPORT, DUCATI SCRAMBLER 1100 SPECIAL, DUCATI SCRAMBLER 1100 SPORT PRO, DUCATI SCRAMBLER 1100 PRO, DUCATI SCRAMBLER 1100 DARK PRO, DUCATI MULTISTRADA 1200 DVT, DUCATI MONSTER 937 PLUS, DUCATI MONSTER 937, DUCATI MONSTER 797, DUCATI SUPERSPORT 939, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 939, DUCATI DIAVEL 1260 S, DUCATI HYPERMOTARD 821
It's too wide.
It is so wide that when inserting and removing the STAND, you have to raise the body of the car considerably to get it on the ground. View detail
Fits: TRIUMPH T595DAYTONA, TRIUMPH T595DAYTONA, TRIUMPH T595DAYTONA, TRIUMPH Daytona955i, TRIUMPH Daytona955i, TRIUMPH Daytona955i
Genuine R&G Fork Protector for Triumph Daytona 955 1997
This bike came in for a bit of an overhaul in way of protection. The customer wanted some R&G protectors adding to it just in case of any accidents or falls. This was one of the parts for the front forks. These are really great for protectors as they do what they are supposed to do. I found the right ones bu=y just going through Webike search for this bike and they were all listed for the R&G brand. The cost was good too and were on offer at the time of ordering. Witht he other crash protectors for this bike, I got them all shipped together so they arrived at the same time. I do use EMS and my order was delivered in 5 days from being shipped. The fork protector came in the standard R&G plastic clear box and did include all you need to fit these. There are comprehensive instructions so you really cannot go wrong. The fit perfectly and the quality is excellent. The threaded sections are crisp and clean and the bobbins on the ends are perfect too. Very hard wearing from past experience. The end result is as expected and I for one am very pleased with the fitment and how they look. Thank you Webike. View detail
Fits: TRIUMPH T595DAYTONA, TRIUMPH T595DAYTONA, TRIUMPH T595DAYTONA, TRIUMPH T595DAYTONA, TRIUMPH T595DAYTONA, TRIUMPH T595DAYTONA, TRIUMPH T595DAYTONA, TRIUMPH T595DAYTONA, TRIUMPH T595DAYTONA, TRIUMPH T595DAYTONA, TRIUMPH Daytona955i, TRIUMPH Daytona955i, TRIUMPH Daytona955i, TRIUMPH Daytona955i, TRIUMPH Daytona955i, TRIUMPH Daytona955i, TRIUMPH Daytona955i, TRIUMPH Daytona955i, TRIUMPH Daytona955i, TRIUMPH Daytona955i
Genuine R&G Classic Style Crash Guards for Triumph Daytona 955 1997
This was another piece of the crash protection for the Triumph Daytona 955 1997 that the customer wanted. Finding the right ones for this model of bike was straightforward, I also double checked on R&G website for my own peace of mind. The price was really good value and as I got them all shipped together, this also helped with the overall price. The shipping courier I went for was EMS fast service. They delivery my orders within 5 days and I have never had it take any longer than that. From Japan to the UK, that's just brilliant. Upon receipt of my order, the outer box was sealed with tape and nothing could escape during transit, not even the gaskets which are flat could be lost. All the item in the box were packed very well and bubble wrap was also added for additional security. Everything was 100% perfect. The material of these bobbins I am not sure of but they really do take the speed of if you have an accident. The classic shape is really retro looking which also adds the curves of the Daytona 955. These bobbins are pretty easy to fit but just do one side at a time and get some support for the engine as when you remove each bolt, there is a small risk that the emgine will also move. Yes, I have made this error myself so do not do the same. Always take precautions beforehand. If you do not add some support to the engine and it does drop slightly, you will either never get the bolts to grip or you will just strip the threads and possibly mess up the female threads on the engine.Take your time and follow the instructions R&G provide. Saying that, they do not suggest supporting the engine but I always do now. One happy customer, thanks Webike View detail
Parenthesis good!
I installed it and I am satisfied with its appearance and Parenthesis.
However, the Change Pedal and the sub-frame interfere with each other because the engine is set to 125cc, and it seems that some ingenuity is required for installation.
View detail