Reviews
Fits: HONDA CB400SB Revo, HONDA CB400SF Revo, HONDA CB400SF, HONDA CB400SB
For an easy and good looking Position!
I fell and bent it. If I'm going to replace it, I want to replace it with a cool Other Brand Product." I replaced it with a new one. Anyway, the gold color is cool! And the most important position, I am satisfied with the large size of the Handlebar, which makes me less tired when I am touring! I strongly recommend replacing the handlebar before replacing the exhaust system! View detail
Fits: HONDA CRF250R, HONDA CRF450R, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX450R, KAWASAKI KX125, KAWASAKI KX250, HONDA CR250, HONDA CR125
Anodized is beautiful.
MX-123 was installed on a CRF250.
OEMSeat is modified with 3cm up high seat and 14mm up spacer to get the best position.
View detail
Fits: HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled)
Not hitting Tank.
I was wondering if I should buy the Steering Damper, but I am glad I did so at a reasonable price. View detail
Fits: HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Buckhorn Handlebars
Great product with good workmanship. Bought the dent bar.Have to drill holes for internal wiring when installing the handlebars and does not need to extend the cables from my previous bar. View detail
RnineTHandlebar replacement
We chose Silver because we wanted the same color as the OEM.
Position has become easier and more enjoyable to ride.
View detail
It got easier to ride
The Black makes it look tighter and easier to ride with a more comfortable posture. View detail
excellent quality
Extremely solid, well made bars. I have fitted inverted for a low clubman style. Works well in combination with the bar end mirors and SSK adjustable levers. View detail
Fits: HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four
Effex EZ-fit bar
I ordered these bars hoping they would be a good fit and upgrade for my cb13 I was not disappointed,they look great with the handlebar brace I have already and on the plus side the holes for the standard switches are already drilled out which makes these an easy going job to change View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GSX400, SUZUKI ST250 E Type, SUZUKI ST250, SUZUKI RV200 VANVAN, KAWASAKI BALIUS2, SUZUKI GSR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100, KAWASAKI ESTRELLARSCustom, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZRX1200R, KAWASAKI ZrX1200ZrX1200 DAEG
Used for ST250
Used for ST250.
We were happy to be able to use the Wires as they were.
View detail
Not attached to SP
The Left Switch Box cannot be installed on the 21-year MT-09SP RN69J because the position of the hole to prevent the Left Switch Box from turning around is different. View detail
Stronger paint than HURRICANE Conti.
The height of the Handlebar is just right and I like the strong paint! View detail
Would recemond these to mx or woods users, have used them on other bikes and they hold up great!
I bent old handlebars and bought these. Did a lot of research and wanted a quality handlebar. I really like them.Really good quality. It looks good and feels good. These bars build confidence.Highly recommend Renthal. View detail
Fits: HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Car Type Exclusive Design
It was easy to install without any modification.
As per other impresarios.
If OEMGrip is used as is
Throttle Cable can be easily installed without removing it.
(I replaced it with an external one)
The Size of the Bar pad is a little short.
The options for replacement are
I thought it would be slightly less.
View detail
Normal good
Narrower and lower than OEM, recommended for those who do not want to use Separate handle.
However, I don't like the fact that the holes have to be increased to make the desired position due to the holes being machined.
I want it to be without Hole.
View detail
Fits: KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
Nice, not too naughty
I was looking for a YB aperture and after comparing and contrasting, I bought it.
Not too naughty for z900rs, Large person squeeze.
Both city driving and Touring have become easier.
The only thing is that the Plating Process does not produce any color.
At least give us Black color as well.
View detail
STD Handlebar with a little seasoning is very good
My DAEG uses an antlion Fit barClamp, but with the EZ-FIT Bar, the height is about 20mm higher than the NORMAL bar and about 12mm to 15mm higher than the NORMAL bar, which makes the riding position much easier.
I guess it depends on the individual, but RightSwitch's Harness is quite full.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, KAWASAKI KLX250, KAWASAKI D Tracker
Rigidity and beautiful colors
I own a MOTARDMedium with the same molding for both Cx and comp. Small students prefer the cx bar, which is a little stiffer with less individual variation in shape. View detail
Fits: KAWASAKI ESTRELLARSCustom, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W400, HONDA MONKEY, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA NC700X, HONDA FTR223, HONDA FTR223, HONDA CB750, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA MONKEY, KAWASAKI BALIUS2, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, HONDA CB1100
I installed it on a 250tr.
I installed this on my 250tr. I was bored with the OEM so I took a shot at it as an amateur. I was nervous about drilling the holes, but it turned out well. I am looking forward to touring. I am looking forward to touring. View detail
Successfully completed installation
This is my second Bogue, and I'm sorry to hear that the positioning holes for the Switch were defective. I was able to install it with no problem. I was able to put it on with no problem. The narrower width made it sturdy enough to be used with the Offset riser and the Hose and Large. I would have given it 5 stars if it were 3 cm higher and at least 10,000 yen less. View detail
What I found when I changed it.
The OEM taper handlebar does not fit the handheld closed type hand guard.
The reason is that the inner diameter of the Bar End is too narrow to accommodate the end adapter of the Hand Guard.
(Probably so thin that even other companies' hand guards would not fit in it.)
If you want to replace it, choose this Type to shorten the Handlebar width.
I saw a comment that the OEM width of 800mm is for foreigners with long arms and long for Japanese.
As a result, it feels right to me.
I chose Gold from the image, but the actual color tone is more like Orange.
View detail