Reviews
Fits: YAMAHA DRAG STAR 400, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03
Quality good
Side mirror is good quality, matches the look of my bike. However require to order 2 unit. Each order is only 1 side mirror. Hence, i am required to order 1 more side mirror. View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
I'm writing well.
It's been a while since I bought it, and I thought it was necessary to change it at first, but the more I use it, the more satisfied I am with the dress-up parts. The regular genuine lever was really uncomfortable. It's far from my hand and the lever is thin. It was hard because I kept turning off the bike with the genuine lever, but it's so nice that it's almost gone after changing it. I highly recommend it. View detail
Fits: YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJ6N, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6
Great
great replacement fits my boom 250cc, you should tottaly get it if u ever break ur brake lever, great item give it a 5 star review View detail
Stage 6 Mirror
Fast delivery within a week. Quality and appearance looks great. Easy installation. The only downside are is a zoom-in lens. With quite small lens. Zoom-in lens can be quite hard to look at. Hope you will consider the change to normal lens View detail
Fits: HONDA Rebel250 S Edition, HONDA Rebel250 S Edition, HONDA Rebel250, HONDA Rebel1100 DCT, HONDA Rebel500, HONDA Rebel250
good item
Riding the Rebel 1100 raises the position of the uncomfortable steering wheel high. It's a great item because you don't have to change the steering wheel and you don't have to change the cable. It's just too expensive. View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA TZR250R, SUZUKI RGV250γ, SUZUKI RGV250γ, SUZUKI RGV-Γ250, SUZUKI GSX-R600, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10R, HONDA RVF, HONDA NSR250R, HONDA CBR400RR, HONDA CBR250RR, HONDA CBR250R, HONDA CBR150R, HONDA CBR1000RR-R
Anyway, it's beautiful.
[How is it used?
I recently acquired a long-abandoned VTR1000SP2 from an acquaintance, and the handlebar was a Sansei RACING Endurance Spec. The handlebar had a Sansei RACING's endurance spec. type separate handle that can be removed in a snap. The angle of hanging is more than 10 degrees. The bar is far from the other side of the Fork. I tried to roam around the neighborhood once, but I couldn't ride it, so I bought this product.
I was looking for a cool type with a bar growing right next to the fork and a hanging angle of 10° or less, and found SUPER NOW's Racing Handlebar Type A to be EXACTLY what I was looking for.
Was the one you received as per Image?
I have purchased SUPER NOW products in the past. I know the quality is good and I received a beautiful Handlebar as per Image.
How was your experience with it?
Positioning has become much easier. Since I usually only work on off-road vehicles, I thought that replacing the handlebar on the separate handle would be a gamble since I did not know if it would interfere with the handlebar or not, but I am very happy that it was successfully installed.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
There is nothing.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Grips are standard RossiGrip.
HONDA OEM Grip Left Side (https://www.webike.net/sd/23201784/)
HONDA OEM Grip Right Side (https://www.webike.net/sd/23201783/)
View detail
Hand guard is not so cool.
I was looking for a different hand guard for my 701SUPERMOTO hand guard because it was too large and not cool enough, and I found this product.
Handlebar inner diameter is 14mm.
All you have to do is remove and replace it, so the process is quick and easy.
I think the Handlebar vibration is suppressed because the Lever Guard tip is shaking when Idling, maybe.
I have no idea how much change there is from the original, since the purpose is to change from the OEM hand guard and not to reduce the vibration of the handlebar.
Refreshing the handlebar area is the most pleasant change.
It is quite solid and seems to protect the handlebar area even if it falls over in the Circuit, although I don't want to experience the effect.
View detail
Fits: HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Dio ZX (DIO), HONDA Dio SR (DIO), HONDA Dio SR (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Ape(100)(APE), HONDA Dio (DIO), HONDA Ape(100)(APE), HONDA Ape(100) (APE), HONDA Ape SPECIAL (APESPECIAL Knife), HONDA Ape Deluxe(100) (APEDELUXE), HONDA Ape Deluxe(APEDELUXE) (50), HONDA Ape (50)(APE), HONDA Ape (APE)(50), HONDA Ape Deluxe (50) (APEDELUXE), SUZUKI Lets4G (LETS Forge)
Normal Mirror for mopeds.
ThirdMotorcycle's Today Mirror snapped off and I had to replace it. Very easy to read! Reasonably priced! … Too bad the Week Point is a little cheaply made…. "luxury" This is not for those who are looking for the best Mirror for their feet, but it is the best Mirror to wear on a foot scooter! View detail
Throttle Cable tip processing was messy.
I was satisfied with the quality of the product, but the ball on the Throttle Cable attached to the Throttle was poorly machined on the Throttle mounting side, and it did not fit without modification. View detail
Fits: KAWASAKI estrea, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W650, HONDA Shadow 400, HONDA GB250, HONDA FTR223, KAWASAKI Estrella RS, KAWASAKI Vulcan 400, KAWASAKI Vulcan 400 Classic, SUZUKI Intruder 400 Classic, SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, YAMAHA SR400/500, YAMAHA TW200/E, YAMAHA TW225/E, YAMAHA Dragster 1100, YAMAHA Dragster 1100 Classic, YAMAHA Dragster 250, YAMAHA Dragster 400
It was defective.
After installation, the Fuse jumped when I checked the operation. I checked and found that the Bolt of the Blinker's Wiring Fix had contacted the Earth of the Horn and was shorted. I did not expect high quality because of the low price, but if you are going to sell them under the GarageT&F brand, you should at least check the operation of all of them before shipping, etc. I was disappointed when I installed it after processing and repairing it. View detail
A better throttle pipe for the GROM!
This is an improved throttle pipe from KITACO for the Honda MSX/GROM. It makes a slightly quicker throttle response (around 10%) which is ideal for the street use and not not as much as an racing quick action throttle. It's a good priced part and as usual from KITACO, a very good quality one. View detail
Great product, great price, easy install
Easy install, took only 15 minutes,went on with no issues. Very good quality and really makes for a much more comfortable ride. Being a 185cm tall rider the 30mm additional height was exactly what I needed for those times I need to be standing up through the rough technical terrain. I would definitely recommend these for taller off road riders.The zeta clamps are exactly what I needed at an affordable price.I can easily recommend these risers.It's worth the money in my opinion. View detail
Genuine BarkBusters Bar Mounts for MT07 2014
These were a purchase because the owner wanted some added protection from wind during long rides and these were a good addition as you can add larger shields. Finding the right part for this specific bike was not hard as I just searched fot the MT07 and filtered the parts needed. These are a little expensive but they are the 2 point fixing and therefore, will not just get knocked off at the slightest hit. Obviously, they do protect the hands and handle bars in case of an accident from being hurt. I did have a couple of other items in my basket and got them all sdhipped together to save a bit of shipping cost. My chosen courier was EMS Express and was delivered within a week of placing the order. The box these came on was well protected and no damage at all. The mounts come with the hardware attachments you need to add to the MT076 so you don't have to buy additional bolts etc. The finish of these is excellent, the paint is a satin black but very smooth and look great. The best part about these branded hand guards is you can add which ever shield you prefer. We already had the carbon ones and all fitted look really cool and a plus point is that they do protecrt. Very happy with the buy. Thanks Webike for the great job. View detail
Fits: HONDA CB400SB Revo, HONDA CB400SF Revo, HONDA CB400SF, HONDA CB400SB
For an easy and good looking Position!
I fell and bent it. If I'm going to replace it, I want to replace it with a cool Other Brand Product." I replaced it with a new one. Anyway, the gold color is cool! And the most important position, I am satisfied with the large size of the Handlebar, which makes me less tired when I am touring! I strongly recommend replacing the handlebar before replacing the exhaust system! View detail
Fits: HONDA CRF250R, HONDA CRF450R, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX450R, KAWASAKI KX125, KAWASAKI KX250, HONDA CR250, HONDA CR125
Anodized is beautiful.
MX-123 was installed on a CRF250.
OEMSeat is modified with 3cm up high seat and 14mm up spacer to get the best position.
View detail
Fits: Others , SUZUKI V STROM 650
Easy to install
Model:YZF-R25
I was about to buy Repair/Option Parts, but changed my order because Body was on sale for less. I have used it before to reduce vibration on a single cylinder and I am using it on my R25. Recently, I have been trying to increase or decrease the weight because I am concerned about the vibration, and when I made it heavier than 350g, my whole arm went numb, so now I am going to try 300g.
View detail
easy to read
I installed the mirror on my MONKEY125 because it was hard to see. The rearward view is not only easier but also extended to the front, so I can use it very comfortably with less eye movement. View detail
Fallen cannibals
I use Retractable Lever, but I bought this one just in case.
I have not yet encountered a situation where I can install it and see how it performs, so I can only judge it by its appearance.
Cut-out products are quite satisfying just to install.
When installing, make sure that the Clutch Side and Brake Side are facing in the correct direction, as it is indicated on the package which side it is on. Also, there is no indication of which way is up or down. Use your own experience to cover it.
View detail
The usual.
This is the Lock wire I use all the time.
I bought it because it was out of stock.
I have Sizes before and after this one, but the 0.57mm is the most versatile.
View detail
Roughness is noticeable but sufficient Level
The end of the cord is divided into a Headlight wire and a Connector that holds together the OthersBlinker and other components.
It looks like Gold genus and is a bit heavy.
Blinker also has a slightly unique switch. Normally, the switch can be returned to the center position by pressing it lightly, but this switch will not return. You need to return it to the Center position by yourself. It is so difficult to return that the opposite Blinker will be attached if you do not press it with a good degree of force.
View detail