Reviews
Fits: HONDA MONKEY, HONDA GORILLA, HONDA CHALY
CROSS CUB (JA45)
Used for CROSS CUB (JA45)
The one from a certain Manufacturer is too expensive, so I chose this one.
It doesn't feel Aluminum-ish, but the texture is usually good.
It is also easier to turn when adjusting, increasing practicality.
View detail
Cool nut
I bought a nut from Cuby for the rear lever for my beloved Honda Monkey. The nut is perfectly milled and has a smooth surface. It's a pleasure to regulate. Good quality, great price. It looks harmonious.
I bought a nut from cuby for the rear lever on my favorite Honda Monkey. The nut is perfectly milled and has a smooth surface. It's a pleasure for her to regulate. Good quality, great price. It looks harmonious. -------------------------------------------------- -------- I bought a nut from Cuby to my beloved Honda Monkey to the rear lever. The nut is perfectly fixed and has a smooth surface. It is a pleasure to regulate her. Good quality, great price. It looks harmonious. I BOUGHT A NUT from Cuby for the Rear Lever on My Favorite Honda Monkey. The Nut Is Perfectly Milled and Has a Smooth Surface. It's a pleasure for her to regulate. Good Quality, Great Price. It looks harmonious. Powered by Google Translator
View detail
Fits: SUZUKI GSX750S-1100S, SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX1000S, SUZUKI GSX1100S
RearBrakes custom
The rear brake was changed to the same spec. as the front brake replacement.
I was able to replace it without any difficulty with Bolt On. The Large change was done with BrakeTouch as expected.
View detail
Fits: Others , HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110
Attachment, but it is good to have practicality as well!
I bought it to adjust the rear brake, but it is surprisingly conspicuous at one point, and I bought it to match the color of the car body.
Easy to install, practical parts, inexpensive and of good quality, so you can osusume it.
View detail
Fits: HONDA SUPER CUB [Super Cub]., HONDA MONKEY [MONKEY]., HONDA CHALY [Shally]., HONDA DAX [Dax]., HONDA SUPER CUB [Super Cub]., HONDA MONKEY [MONKEY]., HONDA CHALY [Shally]., HONDA DAX [Dax].
CHALY to Refresh!
CHALY The new product is now also attached to the The footprint shines and gives it a more luxurious look! View detail
Fits: HONDA SUPER CUB [Super Cub]., HONDA MONKEY [MONKEY]., HONDA CHALY [Shally]., HONDA DAX [Dax]., HONDA SUPER CUB [Super Cub]., HONDA MONKEY [MONKEY]., HONDA CHALY [Shally]., HONDA DAX [Dax].
CUB Rear To!
CUB Rear I put it on a It looks very classy. It is well made. View detail
More presence than you can imagine! Note the color for Blue!
I bought it without any expectations, thinking that it was a very small part and honestly, there would be no change whatsoever even if I put it on. And the price is quite expensive.
However, once installed, it has a strong presence and is a very effective dress-up as a one point accent! The finish and precision of the product is as expected from KOKEN. The installation requires a little bit of force because it is too precise and tight.
My one complaint is that the color was different from the Image. I ordered this time. "Blue" From, Earls Blue. If you want to match the blue color of the top cap of the front fork on the MC51 CBR250RR, you should definitely use the blue color of the top cap of the front fork. Earls Blue. I think this is one of the drawbacks of mail order. This is one of the drawbacks of mail order, and I think it can't be helped as long as the actual item cannot be confirmed. I hope it will be helpful to those who are going to buy.
View detail
Product # W-1741-P40026802
I am gradually buying different beautiful things to make my motorcycle more wonderful. Brake regulators are another point of design work. The item is very convenient to use. I recommend it to everyone. I am gradually buying various beautiful things to make my motorcycle more wonderful. Brake adjusters are another point of design work. The item is very convenient to use. I recommend to everyone. View detail
Fits: YAMAHA YFZ450(ATV) 04-10, YAMAHA RAPTER350(ATV) 04-09, YAMAHA YYZ85 94-14, YAMAHA RAPTOR700(ATV) 06-09, YAMAHA SEROW225 WE, YAMAHA RAPTER660R(ATV) 01-05, YAMAHA SEROW225, YAMAHA SEROW225 W, YAMAHA YZ80, YAMAHA XT250X, YAMAHA SEROW250, YAMAHA XG250 TRICKER
Rear brake pedal height adjustment
I wanted to position the rear brake pedal higher than the NORMAL position. This product can be used to achieve this. View detail
Not attached to Rear Sets!
The SPG force is a little stronger than I expected, and it takes a lot of force to step on the pedal until the RRBrake locks, but the controllability is improved by a LARGE amount compared to without the spring. It is a very simple part, but I would have been happier if the spring force could be selected for the parts that affect the Control system. View detail
Fits: YAMAHA WR250R, YAMAHA YZ125, YAMAHA WR250X, YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ450F, YAMAHA YZ250F, YAMAHA YZ250
Color is Parenthesis good
The OEM bracket is a normal Chromate plated bracket, so it will look better with a larger bracket. I think all of these small parts should be ZETA products. View detail
It is very good
Used for MOSCaliper in R1.
I bought this product because when I replaced the pad with brembo's Z04, it became difficult to insert the pad pin when the pad spring was attached.
What is WeBig's response to the conformity inquiry? Buy it because it's a Universal Product, and you'll have to figure it out and put it on yourself." So I jumped down from the clean water stage, even though the price was a moderate 2,200 yen per bottle.
The result is …
Large was right!
Pad replacement has become extremely easy, and the pad movement has become Smooth.
However, MOSCaliper is a type where the pad pin is inserted and held in place with a βpin. The easier it is to insert, the easier it is to remove, so I think that wiring is necessary to prevent the pad from being removed.
View detail
Fits: HONDA CRF1100L Adventure, HONDA CRF1100L, HONDA CBR650R, HONDA CBR600RR, HONDA CBR1000RR, HONDA CB650R, HONDA CB400SB, HONDA CB400S.F, HONDA CB1300SB, HONDA CB1300S.F, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1000R, HONDA X4, HONDA X4, HONDA X11, HONDA VTR1200F, HONDA NSR250R, HONDA VTR1000SP2, HONDA VFR
I'm satisfied with the texture.
Full floating in Circuit
SemiFloating is best except for Circuit.
Wave washer- I think it would be better if the waves were just a little bit smaller.
View detail
periodic replacement
Used as a regular replacement when Brakes air was drained.
The product is a brembo OEM Product, so I was able to use it without any problems.
View detail
periodic replacement
Used as a regular replacement when Brakes air was drained.
The product is a brembo OEM Product, so I was able to use it without any problems.
View detail
Used for Yamaha Brembo in R7
I couldn't find any information on compatibility, but I used it on my YZF-R7 Radial master.
The diameter and length are the same, so it worked fine.
The weight was 7g compared to the OEM 12g, though not enough to be concerned about.
Wiring is possible due to the hollow structure.
I don't know if there is any change in the feel of the product, but it looks better, so I am satisfied.
View detail
Fits: KAWASAKI Z750 (air-cooled), KAWASAKI Z900 (KZ900)
Rusted and replaced.
When we converted from OEM footpeg to Rear Sets, we replaced the OEMSpring because it was rusted. The spring looks beautiful and the spring feel has also changed and the pedal return has improved. View detail
Good in both color and design
I used it on a Brembo master other than RCSMASTER.
I was able to install it without any problems.
I am looking forward to the wear strength of Titanium.
View detail
Fits: KAWASAKI 500SS Mach III (H1), KAWASAKI H2, KAWASAKI KH, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750FX, KAWASAKI H2, KAWASAKI KH, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750FX
I'd rather buy a Besra ….
It is useless unless you hit Pin on the back of the Pad and attach it.
Then you should buy a Pad with Shim from Vesra.
View detail
Fits: HONDA CRF1100L Adventure, HONDA CRF1100L, HONDA CBR650R, HONDA CBR600RR, HONDA CBR1000RR, HONDA CB650R, HONDA CB400SB, HONDA CB400S.F, HONDA CB1300SB, HONDA CB1300S.F, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1000R, HONDA X4, HONDA X4, HONDA X11, HONDA VTR1200F, HONDA NSR250R, HONDA VTR1000SP2, HONDA VFR
Shipping was slow and Shock
The product description says it will be shipped in 4 days, but the order confirmation email says it will be shipped more than 2 weeks later. I am not convinced. View detail