Reviews
countermeasure against standing up
Installation is easy
I expect that Damage at the time of the fall will be limited to the smallest limit.
View detail
Fits: HUSQVARNA 701 Supermoto, HUSQVARNA 701 Enduro
Can be used for 23 years
Installed on a 23 year old 701 Enduro.
I was a little hesitant to buy it because it was listed as a compatible year 16-19.
The rubber parts of the inserts need to be removed from the OEM ones and transplanted,
As a result, it can be installed without problems.
It came with two pieces of what looked like a heat-shielding Washer of two different types, though,
Only LargeSize was used between this Parts and the mounting.
(If Small size is also added, the length of Screw may not be enough.)
I like it because it is an accent and looks tighter, even though it is almost exclusively a visual part.
View detail
For dress-up purposes from OEM
[How is it used?
I was looking for a non-OEM Exhaust Cover because the OEM Exhaust Cover was dented in a fall, so I purchased one.
Was the one you received as per Image?
As per Image
Was the installation difficult?
I also purchased the OEM 18293-MN0-000 and worked on it.
How was your experience with it?
I am concerned about the clearance and strength of the hooking area with the Exhaust System side.
[Included Parts:were they on?
BrandSticker and other Included Parts:were all included.
[Was there anything that disappointed you?
That Sticker didn't put it up, even in a good way. (If you want to use Carbon fabric as it is) I thought the Brand logo was stuck on the product image without any border, not Sticker, even in a bad way.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: TRIUMPH Speed Triple, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XT660R, YAMAHA Tenere 700 Rally, TRIUMPH Speed Triple S, TRIUMPH Speed Triple R, SUZUKI SV650 Unfaired, SUZUKI SV650 Unfaired, SUZUKI SV650X, SUZUKI SV650 Unfaired, KTM 890 Duke R, KTM 690 Duke R, KTM 690 Duke IIII, KAWASAKI Z1000, KTM 1290 Super Duke R, HONDA Crossrunner, BMW S1000RR, BMW HP4, BMW S1000R
Good r&g Product
R&g product is very good material and perfectly to fit my akrapovic exhaust. Function good will buy r&g product again in the future. View detail
Exhaust SystemExhaust pipes that may be touched.
I bought this to prevent my heel from hitting the Exhaust pipe part of the Exhaust System. View detail
Exhaust pipe stepping stone injury prevention
I installed this Guard as a measure to prevent mud stains and scratches from stepping stones on the exhaust pipe. I am satisfied with the workability and cost performance of the Guard.
The only complaint is that the paint color of the Guard adheres to the exhaust pipe. Although I have some dissatisfaction with the product, I am satisfied that I have achieved my goal.
View detail
Fits: KTM EXC 250, KTM EXC 300, KTM SX 250, KTM SX 300, HUSQVARNA TE 250, HUSQVARNA TE 300, HUSQVARNA TC 250, HUSQVARNA TC 300, GASGAS EC 250, GASGAS EC 300
Chamber dent prevention
I installed it on my gasgas EC250 which I always use for forest road touring.
I decided to buy this product because I had not worn a chamber guard before and the chamber was getting dented and scratched every time I knocked the motorcycle over, even though it was effective.
The installation was surprisingly difficult, and the Chamber was already distorted, so I had to forcefully install it.
However, once installed, it has been working very well, as it has been guarding the Chamber well and the Chamber is no longer dented by small falls.
I think it is almost a must have Guard for Riders on 2-strokes!
View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
The price is too high.
The price is too high.
Should be attached to Exhaust System as Included Parts:.
Parenthesis so good I bought it.
View detail
Lighter weight due to carbonization (can also be installed in 24-year model)
The 24 model ZX-6R has no major differences from the 23 model in terms of front face, meter changes, and compliance with gas emission regulations, and even when comparing videos and images, I felt that there were few changes in the others. I asked Kawasaki plaza to install the coating with the car delivered to me for maintenance.
As a result, they were able to install it without any modification.
NORMAL is made of Gold genus, so Material:Carbon will be used to reduce weight.
I thought it was well thought out with the heat shield tape attached to the reverse side of the product.
Fitting is good with no interference with Exhaust System or Cowl.
View detail
Certainly the holes don't match.
The holes do not align as shown in the previous Review.
It is made to be fastened in three places, but it can be done by cutting the holes on the exhaust system side with a sander and fastening it in two places in the front and rear. It seems to be strong enough, and the NORMAL cover looks lame. It is a good item for those who are considering to use Slip-on Silencer for vehicle inspection and are tired of this cover because it is too shabby.
If you don't mind cutting and shaving, I'd buy it.
View detail
Fits: HONDA CRF250L, HONDA CRF250M
Liquizo Pawaa foot carbon heat guardPC-18326H
I bought it because it was for crf250l and it could not be installed on the current model md47. it seems to be compatible with md38,md44. Please be careful when you buy it. View detail
What's with the mysterious OEM ring guy? For those who wonder...
The mysterious OEM parts were too mysterious for me, and I thought they could have been a little better. I was wondering if there was anything I could do to improve the performance of the car, and I found a steel plate that came with the Exhaust SystemDesign, so I bought it, It is only for dress-up. View detail
It takes quite a while to reach the..,
I had heard rumors that they are a manufacturer with a long delivery time, but I wonder how they are doing as a manufacturer in this day and age if it really takes this long. It is not like electronic parts.
As a result, satisfied with the product.
Outside of supported model year (2BL-PC40) Screws can also be fixed to the limit. However, there is some interference with Cowl and Rear Sets. (Exactly with no Clearance) 。
View detail
Fitted to protect a stock exhaust.
I took a risk & chose the Standard length intermodal model (120mm) to protect my stock exhaust. It seems to offer enough clearance in the event of a tip over. I just hope I never find out for certain. In my opinion this is the best looking out of the silencer sliders available for the z900rs, hence partly why I chose it. View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, SUZUKI GSR750, SUZUKI GSX-S750, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA XMAX
For Dress-up
Slip-on silencers for the CBR250RR often have a long middle pipe, which is not so good when viewed from the side, but this will make it look cool. The same type of silencer can be found at Jungle for about half the price, but I don't want to put a pirate version on my motorcycle. So, I bought YOSHIMURA genuine products. I think it is good for dress-up, but I think it is also universal because it is only tightened with a 1cm wide Gold Belt. View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
Advanced heating guard
I purchased the GP-Magnum and thought it would be better to use a genuine heating guard, so I bought it even though it was a bit expensive. I am satisfied with the sense of unity and quality. However, I installed it as shown in the product photo, but when my calf touched the gap between the muffler and the flue, it was very hot. . So I reinstalled it to prevent the seams from opening up, and it's a little better. It's hotter than I expected, so I'll definitely have to wear a heating guard. View detail
Fits: HONDA CT125, BMW G310R, HONDA MONKEY125, HONDA Cross Cub110, YAMAHA XMAX
It goes well with the carbon colored Magnum muffler.
The original muffler had a guard, so there was no need to worry about burns. However, after installing the carbon-colored Magnum muffler, I couldn't help but worry about getting burned if I just rode it without a carbon heat guard. After purchasing and installing it, it matched very well with the carbon-colored Magnum muffler. It was as if it came as a single product. .The heat blocking function is also excellent. I recommend it. -------------------------------------------------- -------- There was a guard in the genuine muffler, so I didn't have to worry about burns. But when I was equipped with a carbon -colored Magnum muffler, I couldn't worry about burning without a carbon hit guard. The heat breaking function is also excellent. I recommend it. Powered by Google Translator View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03
Cool look around Exhaust System
Purchased to complement the joint section, which was not looking good when it was replaced with the company's Slip-on Silencer.
The cover that comes with the Normal muffler is a blindfold for the silencer joint, but the Other Brand Product has no blindfold for this joint, making it look not so good.
When the cover is installed, the joint part is blindfolded and becomes the original CowlDesign.
It looks better, but the Clearance is quite Limit, and in my case, I had to pull and deform the Bracket to contact the Exhaust pipe.
View detail
Fits: KTM 690 SMC-R, KTM 690 Enduro
Carbon
[How is it used?
Mainly Touring
Was the one you received as per Image?
YES
Was the installation difficult?
Easy!
How was your experience with it?
Better looking.
[Included Parts:were they on?
It is not.
[Was there anything that disappointed you?
No, sir!
View detail
The best item to protect your muffler
In Korea, full exhaust muffler structure changes are no longer possible.
As a result, the 4-shot muffler of my cb1100ex became rare.
This is the only item that can protect an expensive muffler in case of a fall.
The product photo looks like rubber, but it's made of hard aluminum so it doesn't break easily. -------------------------------------------------- -------- In Korea, it is not possible to change the full exhaust muffler structure. As a result, the four -foot mufflers of my CB1100EX have a scarcity. It is the only item that can protect expensive mufflers in all cities. The product photo came out like a rubber, but it is hard aluminum, so it doesn't break easily. Powered by Google Translator
View detail