Reviews
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
light
[How is it used?
After installation, the car traveled about 200 km.
Was the installation difficult?
It is not so difficult to install except for the Flange, which is a type of two-piece flange, so it is difficult to install unless you get under the motorcycle.
How was your experience with it?
The OEM one is quieter, both idling and running, but the OEM one is louder. Personally, I was satisfied with the quietness, as it was just right for me. The sound quality is not as harsh as the OEM, but low and smooth.
Lightness is somewhat felt when pushing and pulling.
[Was there anything that disappointed you?
There are too many springs to install, but since spring hooks (devices) are not included, it is better to prepare them.
[Others]
Point or hang for installation...nothing special. If you dare to say so, there is no need to twist the O2 Sensor when installing it. If you install the O2 Sensor lightly before fixing the middle Pipe and turn the Pipe side around, you don't have to worry about the O2 Sensor wiring twist.
Availability and clarity of Instruction Manual - I can understand without it.
Items to buy together...Gasket is a good thing to have. The only other thing I need is heat resistant grease.
【Review】
Personally, I don't like the length of the exhaust end, the degree of raising, and the color (I prefer shorter, lower, and Polished Titaniumium), but I am very satisfied with the lightness, the Hand Bent-like curve of the exhaust pipe, and the high quality sound.
View detail
I'm glad I took the plunge and bought it.
I was wondering if I wanted to change the exhaust system, so I looked on the Net, but I was wondering if Japan Government Certificated was the safest choice, but it is expensive.
Spending tens of thousands of dollars just for looks and sound? I thought, "I want it, but I want it more and more, and the OEM Exhaust System is already looking more and more lame.
So, well, I took the plunge and bought it, even though I would regret it.
The installation was O2 Sensor was Large odd.
I had seen on YouTube how easy it was to remove it by groping, but no, no, no, no, no, no, no, no, no, no, no, no, no, no, no, no.... I can't even get my fingers into the claws.
But even that [Color] Once I cleared it, the rest was easy, even for a novice like myself.
You will want to ride it as soon as it is installed.
First of all, when the Engine is turned on, the power increases and the sound becomes Large. But it is Cool.
Then I started running, and guess what? Isn't it getting a little stronger?
I could clearly feel the difference, and when I drove at high speeds later, the RPMs increased, probably due to the improved air flow, which also increased the maximum speed.
Riding the Motorcycle has become many times more enjoyable.
The Sound of the embellishment is especially numbing.
So I'm really glad I bought it, even though I'm scared of the debit at the end of this month.
I may be doing more long-distance touring in the future.
View detail
DELTA Barrel4-S mini CT125CT110 HUNTER CUB JA65
The Torque at low speed immediately after starting and the extension at high rpm in 2nd and 3rd gears have been dramatically improved.
Mid-range speeds are as easy to handle as OEM
When the engine is put into 4th gear, the torque is a little thicker than the OEM Exhaust System.
Overall, the Torque is slightly increased and the high rpm is extended.
I don't think there is any increase in maximum speed.
The volume is quiet when idling, and when turning it up, the sound of the Exhaust System is heard, but personally, the volume is just right.
The sound quality is not a heavy bass sound, but a crisp Parisian sound typical of single cylinder engines.
I had installed Barrel4 on other cars in the past, but I felt that the sound of Barrel4 was very solid!
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY S, HONDA CRF250L, HONDA CRF250L S
(Current status) Dress-up 90%, functionality 10%.
SP Tadao It is a combination with PowerBox Pipe
The combination is not recommended by the respective Manufacturer and
Installation is solely under personal responsibility.
Gasket between Exhaust pipe and Silencer pipe
SP Tadao PowerBox + Normal silencer is not required.
Normal pipe + YOSHIMURAExhaust System
When
Installation Instructions Manual for each product.
Tentatively assembled.
It doesn't seem to make much sense to put it on.
Gasket was not used to do the work.
Installation takes just over an hour.
It is better to temporarily assemble the silencer band & bracket first to make progress.
The sound is LARGER than NORMAL
The sound quality is not as caged as that of NORMAL, and it has a high, clear sound.
I can feel the change itself.
I feel a bit concerned about warming up my own Apartment on the bike parking lot!
As for functionality, I just did a short run around the neighborhood,
at present
I have not been able to experience the same power output increase etc. as when the PowerBox was installed.
■Personal Evaluation
Dress-up 90%,
Functionality 10% (*Contributes to weight reduction, although no output increase can be felt)
So I have to say that Cost performance is low.
If you have a problem with Gold, it might be the first Parts you release...
View detail
Fits: HONDA DAX125
None
It is a good product with good sound and Design. View detail
Easy to install
To begin with, I bought it for replacement for an OEM that looks rusted and battered.
The product itself can be installed without any difficulty, but I tried to replace the stud bolt because it was a good opportunity,
It still broke and Shop took care of it.
I am happy with the way it looks and the way it is attached to my car.
The most important thing is the effect, but I have run about 30 km and I don't feel it….
When you say it, it is like a smooth Speed ride.
Scattered bells could not be heard.
This time, I am satisfied because the appearance is important to me.
View detail
like a typical (e.g. of a woman)
I got my wish and installed it.
It is more solidly built than it looks and seems to be able to withstand Tie Down austerity.
This bracket is more suitable for the GSX-R than the Tandem Footpeg.
The Instruction Manual is also easy to understand, and I don't think the installation will be confusing.
View detail
Changes in Engine Characteristics
Impression after installation
The sound has changed to a more bass-heavy, stomach-churning quality.
I don't think the volume is that large, but it still feels annoying right after the replacement, but you get used to it after two days.
The Silencer appears to be a Punching mesh of Straight construction, sound deadening material, and a Collaborate Rate of multi-chamber construction.
Change in Engine feeling
Compared to Normal muffler
The Torque feel at low rpm is probably diluted due to the good power loss, but even if this is subtracted, the engine rpm rises smoothly as the pickup and run-up become light and smooth.
Engine braking during downshifts from 4th to 3rd gear, 3rd to 2nd gear, etc., and AxelOff is also lightened to a certain degree in the speed range.
RPM rise becomes Smooth, and acceleration is perceived to be faster due to the shorter time to reach the mid to high RPM range.
As a side effect, the Engine felt less vibration.
Although it was an expensive purchase, we believe the following points will increase the value of this Exhaust System
JMCA Government Certification allows for safe use in the event of an exhaust volume crackdown.
*This is taken to mean that the price tends to be higher because the labor and development costs of certification are passed on to the customer.
Exhaust characteristics are changed and the rpm rises faster, resulting in higher speeds, etc.
The muffler layout is more accessible around the rear axle shaft, making it easier to adjust the chain.
The MORIWAKI muffler is a traditional brand.
These are the good points of this Exhaust System.
View detail
Fits: HONDA GROM
Nice heavy bass
The OEM sound was not bad, but I thought it was a little short.
Personally, it has a very nice bass sound (loud enough to be bothersome in residential areas at night), and the Response seems to have improved, and the Style has improved, making it even more fun to ride. I am very satisfied with this sound and style at a low price.
View detail
Recommended
I installed it on a Chinese 90Engine. The installation position is a little bit gap and it interferes with the Brake Arm, so it is necessary to cut it. The exhaust sound is a bit loud, but the sound quality is excellent. The product is beautifully made and I highly recommend it. I think it is a product that makes riding fun. View detail
What's that? It's on. Sweat.
Today, we temporarily installed the muffler. After much deliberation, we decided to go with the Acrabo muffler.
I really wanted a government-approved muffler with a reasonably good sound.
I don't like the shape of it, but I like the shape of the Aklab, it's perfect, but the sound is... sweaty.
I bought it because I thought it would be a good time to break it in after the break-in period.
Shipped 3 days later... sweat.
I had some time today, so I did a temporary attachment.
My CB250R is an 8BK, and this muffler is an impression of the 2BK muffler up to '21. The 8BK also has a 2BK exhaust manifold and slip-ons.
I knew it would be attached, but I thought that 2BK slip-ons would not be attached to the 8BKOEM exhaust manifold.
I was thinking about it. (I had heard some impressions that the 2BK Moriwaki exhaust manifold did not fit the 8BKOEM muffler.)
I was going to buy a 2BK exhaust manifold if it didn't come with this aclab.
because of ...
What? It's attached. Of course, it's not broken in yet, so it's a temporary installation. The exhaust manifold is not banded yet.
But it's like there's nothing to resist. It feels normal.
And when I put it on, I'm still concerned about the sound.
It was a blast, I felt it was like a Harley with a modified muffler.
I would like to remove the baffles and modify the sound deadening system.
I don't like the sound to be too Large... sweat.
For now, it's just a temporary installation today, so when the break-in is over and it's time to put it on for real, we'll do it.
I would like to make an impression to see if there are any obstacles.
I'm sure you have your preferences, but the sound is a blast. sweat
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Quieter than OEM?
I replaced the Slip-on lineCarbon Exhaust with the Slip-on lineTruck exhaust and actually ran the engine at full power. I wonder why this exhaust system is not JMCA or Japan Government Certificated. Why is it that the volume is the same etc. as the standard value, but only for motorcycles?
I wonder why you are so strict on Exhaust System. Even though there is no regulation for cars, except for the volume, when the Exhaust System is replaced!
View detail
Fits: SUZUKI V-STROM250SX, SUZUKI GIXXER250, SUZUKI GIXXER SF250
YOSHIMURAExhaust System
SEA BASSvSTROM250sxYOSHIMURAExhaust System installation took about 30 minutes, it took longer to remove the OEM exhaust system. I ran about 100 km after the installation, the Torque is higher and I can use the higher GEAR more, the uphill is stronger than NORMAL. View detail
Sound good:??
The sound is great, as is the design!
To be honest, the actual sound is still better than what I see on YouTube!
It does not bother me much while driving, and I recommend it!
View detail
WR’S WR's Round (True circle) SilencerStainless Steel
WR’S WR's Round (True circle) SilencerStainless Steel purchased and installed.
Idling after engine startup is louder than expected.
When Idling is also settled down, the sound range is not disturbing to the neighborhood.
No baffle etc. attached to the car, so even if the car is driven at low speed, it will be a nuisance Level in the neighborhood late at night and early in the morning.
I don't feel any negative impact on Torque, but I am a little uncomfortable driving in residential areas.
There is an effect of slight vibration on steering, perhaps due to improved exhaust efficiency, or perhaps due to the effect of engine rotation.
Although it improves when the Heavy Weight Bar End is installed, it feels more exhausting than in NORMAL.
As for Design and sound, this is a personal preference and should be omitted.
View detail
![Full Exhaust System NEO CLASSIC[Neo Classic]](https://img.webike-cdn.net/catalogue/images/126410/25624937_1_TS.jpg)
MORIWAKI after all
I considered other Manufacturer's products, but I had a long-time admiration for MORIWAKI, so I bought it at OutletSale's Timing.
The product is beautifully finished, and the single-cylinder-like exhaust sound at low rpm and good blow-off at high rpm are also favorable.
View detail
Fits: HONDA GROM
nice sound
I feel that the sound changes from about 6000 rpm, and it is a nice sound that keeps me turning.
However, after one week and about 200km, discoloration and rust started to float, so I recommend applying StainlessGuard if you are concerned about it.
View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI katana, SUZUKI GSX1300R HAYABUSA
Used to replace Exhaust System
[How is it used?
I bought it along with replacing the Exhaust System on my Motorcycle.
I just took delivery of my car and thought I should be able to reuse the Gasket, but this product is so inexpensive that replacing it with a new one is not a Large expense, and I can drive the car with peace of mind from now on.
When the OEM exhaust pipe is removed, the old Gasket inside is taken out, and it is in a surprisingly reusable condition.
Was the one you received as per Image?
As per Image
If you go to 2 Rinkan, Knapps, etc., this Gasket from KITACO is so well sold that you can definitely find it in line.
It definitely looks like something I've seen somewhere else, and I'm not sure if it's an exaggeration to say it's the only option lol.
The Gasket itself is the same as the OEM color, and the size is also Exactly!
Was the installation difficult?
It is not difficult to just put in the Gasket, but to put it in, it may take some time and effort, because in the case of GSX1300RA HAYABUSA, the Radiator and Oil cooler must be shifted in order for the exhaust pipe to drop perfectly.
If the exhaust pipe is removed, this Gasket can be easily inserted.
How was your experience with it?
The Size and color are exactly the same as OEM, so as you would expect from KITACO, a reliable company.
Insert the Gasket, attach the Exhaust pipe and tighten with Bolt.
When tightened, the Gasket is pushed in firmly.
After that, hit the specified Torque and you're done.
[Included Parts:were they on?
No, sir.
Only 4 Gasket
[Was there anything that disappointed you?
I don't think so.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
GSX1300R HAYABUSA2023MODEL, Torque:23Nm*8pcs tightened on exhaust pipe
Despite the perception that the Gasket needs to be replaced along with the Exhaust pipe replacement, I think it is totally possible to remove the Exhaust pipe twice and replace the Gasket once!
View detail
MORIWAKI CROSSTWIN
I think the design of the Eliminator is the coolest. But if you feel that the design of the Exhaust System is not good enough, this is the best purchase for you. It's a great Match. The sound is not too loud because it is legal, but if you are used to it, you may feel it is not enough. But that's the limit of legal.
I hesitate to buy it because it is one of the most expensive Slip-on Silencer products. Please buy it if you are interested in it when it is on Sale.
View detail
It doesn't make it a pontoon in the first place.
I had checked the 8BK-md47 many times with the staff before purchasing it to make sure it was really large and sturdy, but it was not easy to install as there was quite a bit of modification required.
Also, the design of the Silencer in the product image is different, and it is a mystery why this is not checked and changed every time.
First of all, the fixed bolt hole of the middle pipe is 20mm gapped to the Right when viewed from the front, a position that cannot be corrected by compensation.
The Silencer is not fixed to the fixed bolt hole because it interferes with the RightBlinker on the Rear, so I bought a Bracket and modified it to fit with the Bracket. The exhaust port is directly behind the License Plate, so it's really lame.
Why put a Manufacturer's product on the list that does not seem to conform?
And after confirming it many times, why did they respond as OK?
I don't know if the Staff here is too ignorant or appropriate, but I guess it is a company that can't help itself.
View detail