Reviews
Lack of color extension
I put it on my CBR600RR (PC37 late model).
If you have basic tools such as Plus/Slotted screwdriver, pliers, etc., the installation should be large and sturdy.
I googled how to remove the inner weight and used a slotted screwdriver to forcibly remove it.
The Grip was an Active Grip, but it was either too long or the two collars that came with the Grip were too long.
I thought about cutting the Grip because the Throttle was reluctant to move without dodging.
I found an aluminum drain bolt (1mm or 2mm thick) that I don't use in my car that fits the diameter.
We are cutting it down and adding to it.
DAYTONA's Radial master cylinder and DAYTONA's Brake lever (standard length) are just barely 2
It was so hard to hit.
The product is solid and I will use it thankfully.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Ninja1000SX, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R
It reduces glare.
When the Mirror is attached, there is a small gap and the original Mirror can be seen.
This is an escape from Mirror's individual differences, so
It is normal for a gap to form.
The gap is so small that you have to look closely to see it, so it doesn't bother me.
The Mirror on the Right Side did not fit due to individual differences, but I warmed up the edge of the Mirror with a dryer and adjusted it.
It is a little bit easier to see backward, but...
It is not for those who expect a wide angle as it is not excessively wide.
Blue Mirror is self-sufficient.
I'm glad I put it on
View detail
Inexpensive and good
When I replaced the OEM up type separate handle with the HURRICANE Pipe Handlebar KIT, I also replaced the long OEM cowl mirror that I did not like with this mirror.
Although it is harder to see backward than the OEMCowl mirror, I am satisfied with the mirror because it is not bad looking, lightweight, and has a wide mirror surface.
An adapter was included to extend the bracket and make the rear more visible, but I did not attach it because I do not like the way the Mirror extends beyond the Bar End.
By the way, to change NINJA1000 to Handle mirror, Clutch/Brake Clamp with Mirror hole of Z1000 is required.
View detail
Fits: BMW R1200RT, BMW R1200RS, BMW R1250RT, BMW R1250R, BMW R1250RS, BMW R1250GSA, BMW R1250GS, BMW R1200R, BMW R1200GSA, BMW R1200GS
self-satisfaction
I bought this lever for my R1200R. I was looking for a lever that wouldn't break when I stand on the ground, and I found this lever. I think it's good to leave the work to the shop because I can't press-fit without a tool. View detail
Fits: SUZUKI DR 125 S, SUZUKI GN 125
Installation completed without problems!
I have a gs125e, which is a motorcycle that is not guaranteed to fit, but I found this product after returning it and looking up the manufacturer part number myself because I could not install another product that was guaranteed to fit. Of course, the installation was completed without any problem!
What is a little disappointing is that webike does not have OEM Product neatly researched and listed.
View detail
Fits: HONDA CB1100, HONDA VFR800X, HONDA VFR1200X, HONDA VFR800F, HONDA CB1100RS, HONDA CB1100EX, HONDA CBF1000F, HONDA CB1300SB, HONDA CB1300SB SP, HONDA CB1300SF, HONDA CB1300SF SP
The grip width can now be fine-tuned.
It is a replacement from U-KANAYA lever as well as Brake lever.
I was able to adjust the grip to the best width after replacing it with STFLever, because it felt far away from my palm even after making the smallest adjustment with the previous Lever. At the same time, I replaced the Dust Boots of the Clutch Mask Cylinder because they were torn.
The feeling of use is closer to the Clutch connection when it is aligned with one's palm.
View detail
Replaced from GALE SPEED due to spec. change.
Replaced from GALE SPEEDFoot controlKit due to spec. change.
GALE SPEED has a large number of cut-out parts, and although we liked their appearance very much, we had to give them up in tears due to a combination of other parts.
To be honest, as others have mentioned, I did not have a good impression of Babyface because of the cheap Boltetc. and the use of many Bolts for position adjustment such as Shift lever.
When the actual product arrived and I opened the package, I found it to be smaller than GALE SPEED.
It could be said that the chattiness of the product led to its lightness.
Parts are individually packed, and I liked it because I could tell if screws were over- or under-assembled during assembly.
Others have mentioned that the exhaust device drive wire interferes with the exhaust, but I have addressed this by wrapping the wire around the Colgate Tube as shown in the photo.
After the installation and test run, I wrote about how I thought it was too small and how I felt about it.
I was concerned that the use of a large number of Bolts might make it feel clunky, but there was no unreliable feel at all.
I knew it was because Babyface's products are designed to be used in Race.
I personally like the color Large Osaka Gold, but I thought it looked meh when I saw it installed on other people's motorcycles while touring, but when I installed it myself, it had a strong presence and lifted my spirits.
View detail
Buy with Spec. change
Purchased because the Rear Sets were replaced by another company and the length of the existing ROD changed.
The coating is more solid than other companies' RODs, so it is hard to scratch even if Spanner is applied to it.
After all, Terra Moto is a trustworthy company.
View detail
I made a mistake.
The product is fine. I thought it was well made.
However, I think there is a difficulty in the way the Site is listed.
It will not be attached to the 2023 current MONKEY. I made a mistake.
However, I think it should be clearly indicated that it is not attached to the current MONKEY.
Scroll down and just a little bit at the bottom.
If you write "MONKEY" or "GORILLA", it should be old type MONKEY or MONKEY50 (125cc is not compatible), etc....
If you wanted to write in a clear manner, you could.
Well, I made a mistake and since I opened the package, I can't return it.
Please note that it is not attached to MONKEY125.
View detail
Improved feel of Shift change
As mentioned in other reviews, when you Shift change Pushingja. I have a small change in the size of the "Small". I am not sure if I would buy an item of this price just for that purpose, but I think it is worth it. View detail
Fits: HONDA CT125CT110 HUNTER CUB
It is convenient for what it is!
When opening the Seat of the CT125, you must twist the key with the Right hand while raising the Seat with the Left hand.
It was surprisingly difficult to operate, but once I changed to this, the problem was solved!
You can do this by adding a Spring to the OEM Hinge, but the OEM Product has a Shaft welded on, so you need to take this off.
Also, since there is no suitable spring, we need to add a spring from another car model.
Once I realized it would be a hassle, I purchased this one that can be popped on.
It is a good price, but I think it is well worth the price because it is well made.
View detail
What's with the murkiness?
Obviously different from the product photo!
Gap in shape and size is fine.
Colors lol.
I thought they put a protective film over the top.
I peeled it off and it died lol.
Of course I peeled it all off and threw it away!
View detail
I knew it was too big.
I bought Red&Black to match my Gayety Red.
It matches well with the color of the car body, but it is too big and I was worried about where to put it.
Although I was aware of the size before I purchased the product, I regret that it was still too big.
View detail
For a casual Appeal.
If you use YOSHIMURA products, you want to put up one Sticker.
The four letters of YOSHIMURA are forever unchanged.
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
White is lovely.
It is very convenient, although it does not hold anything too large. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110
Because it is OEM
I really wanted a Plating Specification? View detail
It's still good!
Installed on a 2023 SpeedTWIN1200.
I had no choice but to purchase a 2019 MODEL Bikini cowl, as there were none available on the market that corresponded to the 2023 model year.
The quality and style of the product after installation are satisfactory, although additional work is required to cut out some parts for installation due to the different year. However, I am satisfied with the quality and the style after installation.
View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB
I think it was a little small!
[How is it used?
Purchased with the expectation of wind protection for city driving and short distance touring.
Was the one you received as per Image?
It was exactly what I saw in the product listing, but I wish it were a little larger in size.
Was the installation difficult?
The installation was done by downloading the installation instructions on the Net.
But the installation itself was not like living in a house.
How was your experience with it?
As you said, the wind to the chest seems to have improved, but the wind seems to come to the upper side from the bud root
I wish it had a little more height, but I wonder if there is a special incense for front calipers... I don't know, I haven't actually put it on.
[Included Parts:were they on?
Included Parts:was attached.
However, since it was attached to the Seat, the adhesive glue stuck to the Bolt and Washer, so it took a little time to take the picture.
[Was there anything that disappointed you?
The Bolt and Washer included with the Seat are installed, so this is not RoseRose II, but the items included with the Bracket were packaged in one bag, so it is not RoseRose II.
I thought that if they could have done the same, they wouldn't have lost it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Bracket is not that difficult to install, but the Bolt on the Headlight side must be held down when removing the Bracket and the Bracket must be attached to the Quantities.:I thought it would be better to Set
The left side of the body (brake lever side) has a meter in the hand, so there is a possibility that the washer may drop a little, so we need to be careful.
think
It is better to be careful and watch so that there is no gap when the washer is temporarily fixed in place.
View detail
Surprisingly good ?????
I'm not really interested in dress-up, and my theme was to keep the NORMAL cuteness as much as possible, but my friend told me that the tongue in the back is Parenthesis bad. View detail
This is a good choice for multi-cow households.
I recommend it for people with many animals.
Stress-free if recharged the day before the ride ?.
View detail